This tutorial is set by the author to use the CC By-NC-SA protocol.

As we all know, the difficulty of TFR is beyond imagination

If you think it is too difficult to play winter rescue made by the same author

And the TFR package has stopped maintenance ...

There is a little useful tips here.

This tips are only updated to the Redstone era, and the subsequent part (if.) It will be placed in an article on the official wiki (portal).

IntersectionIntersectionIntersectionFirst, you need to clarify the theme of this integrated package

It's not a technology integration package that takes you to develop a technology to build a rocket back to the earth

It is a integrated package that takes you to be familiar with GT6 by the way to experience a group of pension life

Chi Tie Electric Town Post

X.

Create archive suggestions to cheat for a while, so that the small map TP/negligence is easy to remove the machine, the machine is not opened, it is convenient.

The task can be turned on and the keys can be turned on, which can be set in the key position adjustment.There is no need to use the physical task book to flip the task again

It is recommended to make a mark point for picking up the native copper grains.

If you encounter Gray’s small stone, it is recommended not to pick it up, dug all the way to dig all the way to Gray’s mine.

If you see some stone names "including ** ore rocks", it is a mine below, you can make a mark point for easy to dig in the later stages

If the CurseForge version is used, it is recommended to replace Gray's language files with Sinicization

To check the GT information to the page of GT6 instead of going to the GT6U, is there a difference between the official version of the information?

GT6U has stopped with TFR. If you want to make a GT package, do not use GT6U

The GT series is called "MC Chemical Simulator". Before playing

Zero. Bronze era

After making the workbench, make TFC 坩埚 first, so that you smell bronze, you don’t need to burn the pottery kiln.

After making it, how can you find the veins of kaolin stone and graphite, otherwise you will say something in the later stages. Don't believe the prompt of the loading interface.

When making leather, it is recommended to use the same size leather, so that multiple leather can be stacked in a barrel soaking/prefabricated/tanning, it only takes double

It may not necessarily be the sea at a glance, or it may be that the lake is just big. If so, you will not generate sand on the shore.

You can go to the last chapter for stones without a welding, but it has a three -hour cooling time

You can't run the limestone/marble/white 垩/Baiyun rock, you can try it down, and you have the probability of encounter marble in the middle rock formation

Be careful of the durability of your mouse when processing metal

The task of the copper plate enhanced the wooden barrel does not have specific items. Please search for wooden barrels in NEI and find the one that needs to be made by the copper plate.

After the bronze anvil is made, the copper anvil can be placed in TFC 坩埚 recycling, and the bronze anvil can be recycled after the forging iron avil is made.

The wrench can be made early early. A bronze wrench can be used until a crusher. After the GT is made, it is relatively easy to make a wrench.

RC's coke oven is mainly mainly based on alcohol -refining phenol oil, supplemented by refining charcoal, and the production speed of RC coke oven is really low. Carbon is recommended to dig charcoal pits

After a few months, I would like to correct the above sentence. Using the RC coke furnace can keep up with the speed you use (unless you want to use an iron furnace with an iron furnace), but at least two can be built to meet the needs

1. Iron Age

The forging iron furnace must be the highest level, otherwise the production speed is really touching in the later period

Digging red iron ore/brown iron ore/magnetite is best to dig the best. If it is barren, it is best to change the mine.

It is recommended to do the grinding machine before the screening table. You can use European gas to screen various rare gems, so you don’t need to change it in the last chapter.

If you sieved the legendary gem, you will not lose in your life, the probability of explosion is only one tenth of 10,000!

Be sure to practice red and blue steel!If GT 后 does not have it, it is difficult to play in the later stage

Steel melting furnace is a good thing, because you can use the original melting furnace formula with it

Your first combustion room suggests is liquid (used for use), but do not follow the synthetic table to make that lead because of the timing of lead because of the time to grasp ...

It is not impossible for GT 体 to use a solid combustion chamber, but you must use a short combustion time as 1/72 charcoal powder, otherwise you can only watch it when it is close to 2,500K

可以 If you want to melt, you can actually remove the burning room

In fact, you can put the GT (one ingot, one board). Put the TFC 坩埚 recycling in TFC 坩埚 and then put it out of GT 坩埚. This can turn one plate into two plates.One, two life two, two lives and three, three lives all things

The chisel chisel is GT, and TFC cannot be used

例 The model of the model style can be found on this site (GT6> mold), which is here

The RC roller is not needed (unless you just want to complete the task), GT 坩埚 one tablet and one board is really fragrant

The liquid combustion room can use ceramic funnel+wooden storage tank (mission is given)+wooden pipeline to add hybrid phenol oil. Remember to use a wrench to adjust the automatic output of the wooden barrel, so you need to refine the hybrid phenol oil ...

Following the previous one, it is recommended to replace the liquid burning room pipeline and storage tank with metal as soon as possible (recommended bronze). Although the probability of litting the side of the burning room is very small, you may not afford it if they burned.This severely criticized the TFR tutorial written by another author of this site.One cinnabar has two crushed cinnabar ore ...

So why should the author put a CCCP task?

2. Steam Age

The steam era is divided into both sides; the left side leads to the redstone era, and the right side leads to the power era (but the redstone era must be cleared first). Generally, it is recommended to develop:

After making the boiler, go straight to the crusher. After making the crusher, make a bronze turbine and roller bending machine (mass -produced bending board). After that, the grinding machine and pressure molding machine are entered into the redstone era.Mine work

Stainless steel, chromium ravioli, and galvanized steel can be fully developed in the redstone era.

After connecting, the machine in the Redstone Age needs to use galvanized steel, so I still have to take the time to do it on the right

It will be more painful from the steam boiler to the crushing machine, because you need to use TFC's ancient law to smell 10.25+9.5+17 units of bronze

The turbine is recommended not to do it before making a crusher, otherwise it is a waste of ore and extend the construction period

There must be something on the top of the machine, and the snow will also blow up the machine.

After making the steam engine, you can say to the TFC giant liver's blast furnace that the twelve iron plates can be removed and recovered

Interestingly, the official English name of chromium iron ore in the game is Selenite, Chinese is named sub -selenium, and there is no half -c settled with chromium (the English of chromium iron ore is called chromite).And enlighten the vein of the ore vein of Disable and then change the name (see here) By the way, the chromium iron ore is also generated in the invasive rock and Huo Chengyan by default.Let's take care of it in the redstone era

And the soft manganese ore was originally called a slightly sloping stone

When the steam boiler is placed, it must be ensured that the location is right, otherwise it will be fried with steam disassembly.

Be sure to ensure that the heat production speed of the burning room of the steam boiler is not higher than the rated thermal energy of the steam boiler!Don't ask me how to know QWQ (Actually, a 24HU bronze boiler burned with a 32HU steel burning room, and then the steam can not accumulate the last boom in the boiler ...)

There is another way to quickly air deflation: When the steam is reduced to less than 46%, you can use the chisel to clear the calcification (not fried) to give up the righteousness.Differential water boilers, sorry ...

It is strongly recommended to do the dryer. If you do not do it in the early stage, you will find that you will produce a lot of wastewater. At this timeCalcified boiler "

There are small holes on all sides of the steam engine and the turbine, which is where the distilled water outputs distilled water at work. You can use a pipe to save it.

Make at least two boilers, otherwise the crusher will not be brought

If you can't make two boilers, you can first save a little steam in the boiler, and then release a large amount of steam at one time. You can achieve the startup power of the crusher in a short time.

It is too convenient to automatically boiler with water, but it is best to use metal water pipelines. In the case of wood, you must prepare to repair the burned pipes at any time.

After the turbine and the roller bending machine are made, you can mass -produced pipelines, and save a little bit of durability of your mouse.

Do not wash the crushing copper ore and tin ore. It is time -consuming and laborious.

After the grinding machine is made, your mineral treatment is divided into two ways: one is the laundering plant+grinding machine (the mantle), the other is directly grinding

It is usually recommended to grind it directly, unless you are too idle or the task needs to fish a wave

In fact, the soft manganese ore does not have to be dug. Like when I write, I did not handle the soft manganese and made the phrase galvanized steel in the era of discharge power, but when the author played there, let's talk about it.

Green dye can be obtained through the rock grinding peacock

Integrated package found a bug:

Xin Su cable can be obtained by cutting foil and cable rolling machines (cable rolling machines can only be done in the era of power),

However, in the expert mode, the foil can only be obtained through the GTvillery or multi -roller rolling machine (the latter's high -intensity shell requires welding machine welding) (the author of the group of Xun Su Qunluan processing formula is forgotten)

This bug has no effect in the normal mode

(Supplementary: High intensity can be processed by two enhanced housing, and the recipe was not displayed before)

You can guide the iron when the ironmaking is heated to 1811k before heated to 2011K. At this time, the original iron ingot is obtained, and it is also the only way to obtain the original iron ingot except for the unified mines.

：The recommended method of ironmaking:

Red Iron Mine: First throw 14 charcoal/coal and 7 welded welds. When the space is empty in the pot, invest 35 red iron ore powder-> 14 ingots

Magnetic ore: Invest 14 charcoal/coal and 32 magnet ore powder 6 small picks of magnet ore powder-> also 14 ingots

Belly iron ore: The same red iron ore, increase the number of ore powder slightly

Yellow Iron Mine: There are a pile of bunch of the lower bounds in this gadget.

Internal combustion engine YYDS, with it, it can burn fuel directly to RU, and the steps of skipping the steam boiler (KU? You need a rotating kinetic engine ...) This stuff can not burn the hybrid phenol oil ... but you can burn Volca

3. Red Stone Age

You won't you still use the ancient method of paper, right?

Put the ashes burned in the burning room into a potassium alkali water, throw the reed in and soak it.A bunch of GT books will be dropped by fighting zombies.