General machine introduction
Machine tutorial, mouse suspension can view simple machine introduction.
Machine information, check the various parameters of the machine.
Actual power: It is directly proportional to the energy/fuel surplus. The lower the power, the slower the operating of the machine, the lower the output, but the energy/fuel consumed will be reduced, and it will eventually be zero.Therefore, if the machine is to be maintained at high speed, the machine energy can be kept at a high value.
Maximum power: The actual power limit can be improved by increasing components.
Maximum energy/item input/output power: that is, the machine transmission capacity can be improved by installing components.
There are three types: high level, low level, and disable three types.
High level: running with redstone signals
Low level: running without redstone signals
No: No red stone control
The energy and item models have active output, passive output, active input, passive input, passive two -way, disable six types.
Active output: The machine actively pushes items or energy.
Active input: The machine actively inhaled items or energy
Passive output: The machine is not actively transmitted, but it can be actively sucked by other blocks.(Can't be transported)
Passive input: The machine does not actively transmit it, but can accept other blocks actively push.(Can't be sucked out)
Passive two -way: The machine does not actively transmit it, but can accept any operation of other blocks.
Disable: Cannot enter the output, whether the square next to the side is active.
No: The machine does not have the ability to input and output on this surface, such as the side of the engine cannot transmit energy.
