This tutorial is set by the author's setting without permission.

Automatically produce An Shanyan

Foreword

This tutorial is to give some enlightenment for some cute new players.

In this integrated package of the sky kitchen, the demand for resources is very huge, and it is especially important to build a fully automated production line for some necessary resources.Therefore, this tutorial is to produce an automated machine for Anshan Rock. It is not necessary to say the importance of An Shanyan. The output is average, but it is fully automatic.

Note: In the original mechanical power module, there is no synthetic method, so this machine is not available in the original mechanical power

Anshan Rock Combining Table

You can see that An Shanyan's synthesis table is simple.In the early stage, the content of Chapter 2 and 3 has been completed, and the production line can be started.

It is still difficult to automate the workbench synthesis. Let's take a look at the synthesis method of the roller.

Compared with synthesis, the synthesis method of rollers is easier than the workbench synthesis in the early stage.So we must solve the material problem one by one.

First look at how to produce vermiculite and gravel.

You only need some round stones to grind the gravel with stones and then grind out of the vermiculite.The magma can be burned with stones to get the magma.All of the above stones can be produced with rotten stone manufacturing (generally the first level is enough. You can also use more advanced, but the materials will be more).Clear ideas and start to build

How to build

First determine what is used as the position of power and power source.

There are several ways in the early stage (personal opinion):

1. Waterwheel: Advantages: The materials used are relatively simple and can be superimposed.

Disadvantages: Speed ​​(8 RPM) and a single stress (256 SU) are generally general, and speed and overlay waterwheels need to be increased.After all, a roller is 512 SU or 1024 SU

2. Large -scale waterwheels: Advantages: The materials used are relatively simple, and there are a few more stones and wooden boards than waterwheels, which can be superimposed.A single stress is relatively high, it is twice the ordinary waterwheel (512 SU)

Disadvantages: Speed ​​(4 RPM) is very slow and occupy very much. It requires 3 × 3 space.

3. Windmill: Advantages: The maximum speed can reach 16 RPM, and the maximum stress can reach 8192 SU.

Disadvantages: There are many materials used (two groups of wool or sails are required to achieve maximum stress)

After confirming, start construction.

Tips: There are relatively few iron in the early stage. Those who can use the sitting can be used as possible.

Mainly requires the following materials: a number of tips, funnels, large and small gears, and pipelines. Roundstone manufacturing machines, crickets, camp fires and power sources depends on the situation. The roller presses need at least one, and the stone mill requires 3.

First of all, build a power source, and continuously use large gears to connect gears to make the speed reaches the right speed (don't be too fast) to shift gear, accelerate, take off

Place the power roller press and connect the power source.Determine the final synthesis position.

Then start burning the magma and connect to the working basin with a pipe.(坩埚 About 10 are enough)

Finally, the machines of gravel and vermiculite are built, and the power is connected to collect the products with a slot.This is complete

Tip: You can increase production speed by increasing stone mills and speed up speed and stress.

at last

This is the first time I write a tutorial. If you have any errors or suggestions, you are welcome to criticize and point out.

If you encounter a problem with this integrated package, you can ask questions, and I try to answer it for everyone.Play Chapter 6