This tutorial is set by the author to use the CC By-NC-SA protocol.

The idea of ​​using a single magic beam control is the fastest and can satisfy Qiming Ying 4 times in 1 second, corresponding to the most efficient efficiency of Qiming Yingying

The device is not higher than 30 seconds, because Qi Mingying works 4 times in 1 second and produces 36,000 magic power. At the same time, it is also recommended for this tutorial automation scheme for other places.

This tutorial is an automated version. Only plant magic can be used. This tutorial uses version 1.12.2.

Picture, Overview

The picture, whether it is the game once, destroy the cells, place it, or repeat the number of operations, repeat the operation for a period of time, place the gear block, use the magic pulse with the magic detectorQi Mingying 1S works 4 times, and it is the best choice to use the elves magic launcher and resistance lens.

As shown in the figure, the structure that executes limited times

At the beginning of the work, the magic beam of the elven magic launcher passed through the magic detector, and the redstone of the redstone at the bottom right sent a signal to unlock the lower left hourgap timer.There are 1 magic dust on the left hourglass chronograph and 6 on the right. When the six magic pulse is executed, the upper right work opens the front elf magic launcher and re -launch the magic pulse at the bottom of the right.Refers to working six times in a row and start processing the next work. Pay attention to the ingredients of the lens at the top of the left as the blur compound of the messenger.

The follow -up workflow is all to dig out the cells and the game. Therefore

There are two gear relatives to perform a game once, plus the next gear is exactly 0.3s

Here is the connection mining. The work can be completed smoothly when the excavation is 0.3 ~ 0.4 seconds. Therefore, the delay from here to the operation of the game is kept at 0.3s, but it is not advisable to directly put the 3 gearr, because the pulse of the latter's pulseThe longer time is not conducive to stabilizing the work of Qi Mingying.

Signal turning, non -red stone version magic transmitter will automatically transmit

Continue until the last line, which is close to the stable increase of the cell life process and requires a timer. Here, the lens becomes blur-blur-resistance composite lens to incorporate the components of timing.

The left pulse signal is transmitted to the activated hourglass timer, and a magic dust is installed in the hourglass. Therefore, the signal activates it when the signal is introduced. The right side of the redstone fire handlebars flip the energy entity box to activate Qiming Yingying and lock the elf transmitter at the same time.As a result, redstone lamps were on, and the detector was detected by the activation of the letter below to enable the magotic transmitter (redstone) to be added with the lens.The stable status of Ying's stable state has been increased, and the redstone locking status of the redstone lock on the right elves launched, so that it will launch the magic pulse to start the follow -up work. The red stone lamp is extinguished at the same time.Pulse, lock the funnel.

It was a few subsequent excavations and operations to get off, and the maximum production capacity was finally transformed into a maximum production capacity of 6 grids.The magic pulse returns to the initial elf launcher, waiting for the next time it is turned on.

Postscript, this method can also be applied to other operations, such as placing the blocking square (the force transmitter is binding and pushed back once again), add new cells

At the same time, you can also integrate. You need to replace the four labels placed at the beginning to leave the blocks that are not excavated by the magic pulse beam, and the control circuit can be passed.Video link: station B video activated red stone fire handle to become a fine torch handle