Using industrial upgrade nitro diesel high output line [IU] Industrial Upgrade (INDUSTRIAL Upgrade) Minecraft Game

This tutorial is set by the author's setting without permission.

principle:

There is a machine with an industrial upgrade, an automatic farm machine. This machine can produce the seeds that are placed in the seeds that grow. The crops of the Pantumas farm are also applicable. Open NEI, you will find the following formula:

Obviously, the most suitable choice is to connect the two automatic farm machines, so that there can be a happy fruit.

And Xixin Guo can extract seed oil in the GT fluid extract, as shown in the figure below:

Seed oil+sodium hydroxide+methanol/ethanol can produce glycerin and biological diesel in a chemical reactor.

Specific construction and production process:

Place two automatic farm machines as shown in the figure, pay attention to power supply!

When the author was measured, the two automatic farm machines put 4 high -end overclocking upgrades and 1 pop -up upgrade.

Then place a container on the left side of the automatic farm machine on the left. Here is an example.

Next, put Xiangguo in the automatic farm machine on the right, and the entire device began to work to continue to produce happy fruit popping into the container.

In the actual test of the author, the output rate of happy fruit multiple times is similar to 2400 happy fruit per second.

That is to say, 360b seed oil will be produced per second (the number of fluid extraction machines is sufficient).

At this point, the first step is done.

The second step is to reflect the required sodium hydroxide. There is a formula as follows:

Use water and pot to synthesize salt directly.

Place a pot in the circular assembly of thermal expansion, and constantly inject water to achieve automatic synthetic salt.

In the GT mixer, 1 salt and 3B water are mixed with 4B of saline.

In the GT electrolytic, 8B of saline can electrize 3B of sodium hydroxide+1B hydrogen+1B chlorine gas.

You only need to connect three machines to achieve automatic synthesis of sodium hydroxide. Of course, if you want to continuously run the synthesis of nitro diesel, 20/3 sodium hydroxide powder is required per second.

Another raw material for biological diesel, the author chooses methanol. Methanol synthesis requires carbon monoxide and hydrogen, which can be produced by methane in petrochemical products.

There are the following formulas in large and anti -Chinese:

5B methane+6b water = 3B carbon dioxide+8B hydrogen

3B carbon dioxide +1 carbon powder = 4B carbon monoxide

2B carbon monoxide+4b hydrogen = 6B methanol

After flatness, 5b methane+6b water+1 carbon powder = 12B methanol

If you want to maintain the continuous operation of the synthetic production line, 60B/s is required for the supply of methanol.

The synthetic formula of biological diesel is flattened: 54B seed oil+6b methanol +1 sodium hydroxide powder = 54B biological diesel+6B glycerin

The formula of biological diesel is made of nitro diesel as:

4B biological diesel+1B tetopolitic methane = 3B nitro diesel

The formula of the four nitrobitne methane is:

8b nitrate+1B ethylthone = 9B tetopolin methane

Ethyleone requires distillation tower to distilled acetone:

2B acetone = 1B ethyleone+1B methane

There are two options for acetone: Petrochemical lines consume benzene and acryl, and lime powder is consumable.

If you choose acetic acid line:

32B acetic acid+2 raw lime powder = 20B acetone+12B carbon dioxide

12B carbon dioxide+4 carbon powder = 16B carbon monoxide

16b hydrogen+16b carbon dioxide = 32B acetic acid

After flatness, it is 2 raw lime powder+4 carbon powder+16b hydrogen = 20B acetone

If the petrochemical line is selected, the reaction is as follows:

2B oxygen+1b phosphate+12B benzene+9b acryls = 13B phenol+10B acetone

1 phosphorus powder+4b water+2B oxygen = 8B phosphate phosphate

The nitric acid required for tetra nitrate methane should be made from nitrogen hydrogen hydrogen as the initial raw material.

Discard the formula:

2B nitrogen+4b oxygen = 6b nitric oxide

9b nitrogen dioxide+3b water = 10B nitric acid+2B nitric oxide

2B nitric oxide+1B oxygen = 3B nitrogen dioxide

After the flatness

2B nitrogen+5B oxygen+3b water = 10B nitric acid