This tutorial is set by the author to use the CC By-NC-SA protocol.

I found that there is no signal system tutorial in the tutorial. Today, I will come out for a period of time.

First, build an ordinary railway.

Then, confirm the distance between the signal machine.

For example:

What are the three sheep grab the mirror?

The third step is to put two signal control boxes, and match the two trailer signal machines. Ask me how to match, just click the signal regulator to point it respectively (click the control box first)

Okay, the tutorial is over ... and so on?This cannot detect the mining car in the interval.

Do this give the next signal machine again, and then place the inductive orbit at 3-4 grids in front of the first signal machine.

Make another lock circuit:

The piston effect will be said in a while.

Follow the same imitation. By the way, the GUI of the signal control box is set:

Then, in order to make the signal light turning green after the train reaches the next range, do such a thing:

The non -door was briefly destroyed when the train entered the next section.

At this time, the role of the piston over there is displayed: break the lock signal and turn the light to green.

The construction of the basic signal system is completed.

The longer lines can be repeatedly set.

If you want to stop the red light of the train automatically, put two power rails in front of the rails in front of the rails, and the locks output terminals are just taken.