This tutorial applies at least to version 6.11.19

1. Freshly bed Burning Room

After playing for a while, everyone will definitely encounter such a contradiction.Energy is not lacking, but it is difficult to smell.The liquid fuel is small, the heat value is low, and it is gone if it cannot be refined; there are many solid fuels, but it is generally not dared to use it for smelting because it often fry the pan.

The occurrence of the fluidized bed burning room has a good solution to this problem, because the thermal value of each fuel is fixed, and the thermal value of the unit fuel will not be changed due to the upgrade of the fluidized bed quality.Whether it is unit heat or total heat value, the output of the same quality density flow bed burning room is much higher than the output of a tightly solid burning room.This means that if it is used for smelting, the smelting speed will be faster, which will excellently solve the problem of garbage time.

No matter what kind of quality of the fluidized bed burning room, the thermal value of a coking coal powder is 240000Hu. We only need to calculate how many target metals can be smelled by one or two coking coal powder.Because of the efficiency limit, the formula provided next is limited to the burning room of steel and dense steel fluidized bed.

After making the second system of the skills (6), it is recommended to do another dense steel fluidized bed burning room. This machine is good for the smelting or the heat value of the distilled tower.

Here are some formulas (ceramic 坩埚) that I have tested. The format is: the number of coking coal pour, 1 raw material+2 number of raw materials+… = number of finished products, (Note).

The order of the feeding is that it is small and large, and the overall is lost.Specific principles (1).

1. 1, 1 coking coal powder, 5 carbon+3 magnet ore waste+23 magnet ore = 10 iron, (generally no need to reset temperature)

2, 1 coking coal powder, 1 nickel+1 manganese+3 carbon+14 magnetite+1 chromium (must be thrown after 2011K) = 9 stainless steel (strongly recommended each time each timeReset temperature)

3. Other formulas, during construction ...

Note:

1. Reset temperature: 携 will carry a part of the heat, which will affect the next smelting. Sometimes you need to knock out the 坩埚 and restart to reset the temperature.

2. Some materials can be equivalent, such as 1 waste = 1 small powder, a small piece = 1 small pile of powder, etc.

3. Explore formula: In the creative mode, build a smelting device, use the same quality liquid burning room with the same quality of the burning room and the fluidized bed, and save enough liquid fuel with a storage tank.Then perform related smelting operations to record the amount of liquid fuel consumption, and use the unit thermal value to calculate the total heat value.Use the total heat value to divide the number of finished products, and get the heat value required by the unit.With 240,000, in addition to the heat value of the unit finished product, the number of finished products that can be smelted by a coking poustone can be doubled, and finally obtain your formula.

Second, embossed

The molding device is basically affordable, and it is not necessary to say more about the effect: directly get the smelting finished product.Before entering the era of power, after the conditions permit, a molder will save a lot of trouble.However, because of technological restrictions, only one steel can be produced in most cases, but it is enough.If you have the ability to upgrade ， technology and make tungsten, it will be even more powerful.

There are two most direct benefits of the molding device: one can be used as a plastic storage tank, and the other is to be a cable.

Plastic storage tanks are common storage tanks. The raw materials are cheap and will not be on fire.

With the mold pressure device, there is no need to get a multi -roller rolling machine out of the copper line and tin line.

In addition, the steel pressure mold can also directly make the smelting products below 64GU/T, such as copper lead aluminum and plastic, it is not too good.