Indicate: The author of this tutorial is [YMC.INC] yuri's cat-Yuri's cat

I just carry some personal opinions.

1. Natural generation

ore:

All ores in IHL can use wooden pick and above mining tools to minimize

The substance obtained after digging (destruction) the original ore block is as shown above and below.

Magnestes of water chloride -water chlorine powder

Silicon calcium boron -silicon calcium boron powder

Huizheng ore -ontology

Chromium iron ore -ontology

Yunmu ore -ontology

Aluminum ore -ontology

Cinnabar ore -ontology

Rock salt ore -potassium chloride (rock salt) powder

Limestone -Fang Xieshi powder

Gypsum ore -ontology

Tungsten and manganese iron ore -ontology

Natural alkali ore -natural alkali powder

Potassium -the ontology

Phosphorus -phosphorusite -phosphorusite

Nitrogen -nitrate

Extraction of latex and resin:

Gels and pine fats need to be extracted from rubber trees and cedar;

First you need to synthesize a latex collection bag.

Then hold the latex collecting bag, right -click on any of the log trees on a rubber tree, and then slowly wait to collect the liquid rubber, which is the latex.

Hanging the latex collecting bag on the rubber tree will slowly produce latex;

Hanging the latex collecting bag on the spots will slowly produce pine fat;

*Note: If the latex collection bag is placed under the tree (that is, in the mud. The height of the relative tree is -1 grid) cannot produce anything.

** Note: It is impossible to produce the logging of the logs separately and then hanging the bag.

*** Note: No matter where the latex collecting bag is hung on a rubber tree, the latex (except-1 is removed), but if you hang the latex collection bag on its original rubber exit, the collection speed will beBe a little bit

Naturally generated petroleum group:

↑ The left side of the figure is the shape of an underground obsidian, and the cross on the right is its cross -section. It can be seen that its inside is oil.

IHL will randomly generate the oil area as shown in the figure in the underground/magma of the main world and the lower realm. Its basic form is completely wrapped by obsidian, and it presents irregular shapes. The space inside obsidian is filled by oil.

↑ The picture shows an obsidian-petroleum area generated in the lower magma lake in the lower world

2. Introduction of machine GUI and usage

Introduction to the GUI interface of the iron workbench:

Select the red box:

Equipment slot, the equipment used on the left shows the equipment used in the iron workbench.

The default is the body of an iron workbench. If there is a designated device within the scope of the workbench, it will be displayed here.

Most synthesis can be completed as only the iron workbench, but there are still some synthesis that requires placing gas welding machines around the iron workbench to synthesize.

Selected part of the yellow box:

Tool slot, putting the tools required for synthesis here, each synthesis will consume the durability of the tool.

Selected part of the blue box:

The material slot, where the material required for synthesis is placed here, each synthesis will consume the material with the corresponding number of synthetic forms.

Selected part of the green frame:

The finished product slot, if the current equipment slot, tool tank, and material slot meet the synthetic table, here will show all the optional products

Selected part of the purple box:

Oh ... this is just your backpack.

Click to select the product you want, and it will be made after several seconds.

*If you want to stop synthesis, just exit the GUI interface.