The printed device is a very annoying thing, so let me write a tutorial.Before using this tutorial, please learn to use the AE2 automatic synthetic function.

There are 3 types of processors to produce 3 types of processors. Therefore, there are 7 kinds of things to be processed before and after: three circuit boards, silicon boards and 3 types of assembly (pressed into a processor)

The first is to be pressed into a circuit board and a silicon wafer. This is very simple. As long as you enter the raw material from the back, input power from the bottom, and output from the front.

The resonant storage box in the input point in the figure is a raw material buffer area.The output can be directly connected to the ME interface.

However, the pressed circuit board must be pressed into a processor to use it, and it is the most annoying process to be pressed into a processor.

There are 3 inputs in this process: a silicon board, a circuit board and a redstone.The redstone is okay. The uncomfortable is the silicon board and the circuit board.Because there may be the following two situations:

(Note: There will be no these two situations when artificial input raw materials)

Therefore, we need a system to solve it.

If you do not have high requirements for assembly efficiency, you can use the ME interface to connect to the printer directly, and then the ME interface is adjusted into a blocking mode, and the finished pipeline is drawn out.

But for people like me (building madness), this efficiency is far from enough.

Therefore, we need to lay it like the picture below

Endless boxes are raw materials input ports.There are three pipes in the picture. The above is the input of things other than silicon plates (excluding redstone), in the middle is the input redstone (redstone input source external connection), and the bottom is the input of the silicon plate.

The reason why I want to arrange this is because the two resonant servers will send two raw materials to a stamper at the same time. In this way, their arrival time will not be too long, and there will be no kind of disgusting that will appear that kind of disgusting.The situation.However, the transportation efficiency of the upper and lower pipelines is the same.

In fact, if your resources are sufficient, this is the case.

In this way, at the moment of synthesis, both retrievals will detect space and then draw raw materials.So you can completely avoid the time difference caused by the different order of server transportation.

Such a design is completely okay in MC (pro -test).

If you do n’t understand or have doubts, you can tell me in the comment area that I will answer it.

In addition, if you think there are any places that can be improved in this tutorial, please tell me in the comment area, thank you.