This tutorial is set by the author's setting without permission.

MEK mineral doubles are very powerful, so I will write tutorials.

Before using this tutorial, install the aobd module https://www.mcmod.cn/class/591.html or Jaopca to handle other mineral maps with a three -fold mineral line.The first is the purification factory, the second is the crushing factory, the third is the enrichment factory, and the last one is the melting factory.

It should be noted that the purification factory is to consume oxygen, and it can be imported with pipelines.(Oxygen is obtained by electrolytic water)

The three -fold mineral line was completed.

-------------------------------------------------------------------------------------------------------------------------------------------------------

But what to do if the output of a three -fold mineral line is not large enough, four times the line.

The core of the four -line line is the firing factory, which is OK at the input port that is connected to the three -line line

However, the firing factory is to consume hydrogen chloride chloride

The production of this hydrogen chloride is quite annoying.

You have to use the salt water salt water to get salt water first, and then electrolytic saline to get the chlorine (the other gas is sodium, which can be discharged directly)

Then directly electrolytic water to get hydrogen

Put hydrogen and chlorine in a chemical irrigation machine together to get hydrogen chloride

To import it into the firing room, the construction of four times is completed.

----------------------------------------------

But in the later period, what should I do if I can't carry the four times. Come on, five times!

The picture is the core technology of the five -line line, chemical crystals

On the left is the chemical solubility room, the middle is a chemical cleaning machine, and the right is a chemical crystallizer.They all need energy.

Among them, the chemical solubility room should consume gaseous sulfuric acid (this stuff is also annoying explosion)

First of all, you have to oxide into sulfur dioxide in the chemical oxide to get sulfur dioxide.The sulfur is obtained from the gunpowder in the firing chamber. I recommend using the sulfur's sulfur. It has EMC to fully produce automatically.

Then irrigate sulfur dioxide and oxygen into a sulfur dioxide in the chemical irrigation machine

Then use the gas fluid to turn the water into water vapor (note that it is not a steam, the steam burned out of the boiler is not possible)

Then, water vapor and sulfur dioxide can be used into sulfuric acid, which can be used directly.

Just connect the crystallization unit at the input port of four times line.

Note: The processing line can only be processed metal, and if you want to improve the crystallization speed, place the machine according to the figure below, and each crystalline line must be completely independent

In this way, there will not be a situation where the slurry input crystallizer is blocked due to the lack of crystals.

Finally, give you a panorama.

If you have any questions, please tell me in the comment area that I will answer it.