Translate and explain the configuration file for players to modify and configure.

illustrate:

Purple text is the translation content of the configuration file;

The blue text is the interpretation of the thick font;

Red text is an interpretation of the changeable part (oblique) (such as filling type, etc.).

# The block userd by smart_preserve. 0 = Cobblestone, 1 = DIRT, 2 = Stone [Range: 0 ~ 2, Default: 0]

#The block of blocks for Hole Filler -Smart's retention mode.

I: "Fill Block" = 0 #to fill in the number, range: 0 ~ 2

#Keep the filling block, you can see the Hole Filler -Smart introduction.

# How many 'curing blocks' placed per two. Default = 5, min = 1, max = 120 [Range: 5 ~ 120, default: 5]

#How many "healing blocks" are placed every moment.The default = 5 block/engraving, the minimum value = 1 block/engraved, the maximum value = 120 block/engraving.

I: "Fill Speed" = 5 #to fill in the number, range: 5 ~ 120

#Filling speed refers to the number of squares filled every moment.

# If true, DIRT Isn'TE Required in the Player's Inventory [Default: TRUE]

#If True, the player's backpack does not need soil (default: true).

B: "Is Dirt Free" = TRUE#Whether to consume dirt, you can fill in: True/False

#Do not consume dirt, not consumed when True, and consumes time for false.

# Maximum diameter that the hoLE Filler Will consider a house. If hoLE is lisger than this value, it will not file on that axis. Default = 12, min = 32 [Range: 3 ~ 32, default: 12]

#The maximum diameter of the hole is considered.If the diameter of the hole is greater than this value, it will not fill the square on the axis.The default = 12 blocks, minimum value = 3 blocks, maximum value = 32 blocks.

I: "Max Hole Diameter" = 12#to fill in the number, range: 3 ~ 32

# Maximum number of blocks that can be placed per hole.

# The maximum number of blocks that can be placed in each hole.The default = 1000 blocks, the minimum value = 1 block, the maximum value = 3000 blocks.

I: "Max Hole Volume" = 500#to fill in the number, range: 1 ~ 5000

# Maximum diameter that the hoLE Filler Will consider a house. If hoLE is larger than this value, it will not file on that axis. Default = 12, min = 32 [Range: 3 ~ 32, default: 18]# The maximum diameter of the hole is considered. If the diameter of the hole is greater than this value, it will not fill the square (the filling block is water) on the axis default = 12 blocks, the minimum value = 3 blocks, the maximum value = 32 blocksEssence

I: "Max Water Diameter" = 18#to fill in the number, range: 3 ~ 32

#Maximum filling diameter, suitable for Hole Filler -Water.

# Maximum number of blocks that can be placed per hole.

# The maximum number of blocks that can be placed in each hole (the filling block is water).The default = 1000 blocks, the minimum value = 1 block, the maximum value = 3000 blocks.

I: "Max Water Volume" = 500#to fill in the number, range: 1 ~ 5000

#, Suitable for Hole Filler -Water.

# If true, Will Fill Majority of Hole with DiRT, Leaving only Surface Blocks to Match the Environment. Recomged to set 'is_dirt_free' to true. : false]

# If it is True, the soil will be filled with most of the holes, leaving only the surface square to match the environment.It is recommended to set "not consumed soil" to True.(Default: false).

B: "Smart Preserve" = False#Whether to open the retention mode, you can fill in: true/false

#Reserved mode, you can see the introduction of the Hole Filler -Smart.

# How long before 'curing blocks' are converted to dirt, in seconds. This is an approximation as some randomness is involved. E: 1 ~ 120, DEFAULT: 15]

# How long does it take before the "healing block" is transformed into soil.This is a approximate value because it involves some randomness.The default = 15 seconds, the minimum value = 1 second, the maximum value = 120 seconds.

I: "Undo Timer" = 15#can be filled in the number, range: 1 ~ 120

#Return time, destroy the "healing block" within this time to revoke the filling.