Xnet Minecraft Game

XNET's cable (not a connector!) In essence, it is just connecting each machine component. It does not afford the transmission effect, and does not even cache, so the optimization is excellent, the speed of long distance transmission is fast, and the cost is cheap.However, its operation is much more complicated than other mods. Here I write a rough tutorial for your reference.

This tutorial uses universal machinery as transmission objects and is built in the ENIGMATICA 6 integration package.There is a sticker error during the construction period, please refer to the real object.

1. Basic network

The basic network consists of a controller, a connector, and a power supply. The controller needs to be powered to drive the operation of its network.It should be noted that the controller needs to be directly powered by the power supply to power supply through the connector.

As shown in the figure, you need to place the cable directly on the top of the controller.

Of course, you cannot directly connect the transmission effect, you need to set it in the controller.As shown in the interface of the controller, the upper left red bar represents the power, the number on the right side represents the channel, and the following represents the connected machine and components. Double -click the component icon can be labeled highlighting in a red box in the world, which is convenient for inspection; on the right side of the right;Many squares are configuration (input and output) of the component. The grids in the same column are on the same channel. If nothing is done, the following grids are blank. If you choose one on the right, specific settings will appear.

If you want to configure the input and output of the component, you need to create a channel first. If you click on the grid below the No. 2 empty channel, you will appear on the right on the right. You can select what the channel is transmitted at "xnet.energy".Type.The following types can be selected in this integrated package:

xnet.energy

Transmission of electricity is compatible with the power system of each module, as long as it is RF.

xnet.logic

The logical signal transmission provided by the module is transmitted by the redstone signal.

rftools.storage

Storage of RFTools module, please go to the module tutorial of RFTools.

mekanism.logic

MEK's logic signal is also a redstone signal.

xnet.item

Transfer items, connect to boxes and other components.

xnet.flum

Fluid transmission

mekanism.gas

Mek's gas transmission

mekanism.slurry

Mek's slurry transmission

For example, select power transmission, click on the create to create a channel. Remember to enter the name of the channel in the input box in the upper right corner (you can use it without input, but it may cause trouble, and it will not be built in the later router.Identification).Then select the component of the production of electricity, and there will be a Create in the large box below. After clicking, the interface will be as follows.

There is a INS button in it to indicate the power to the component, click to convert it to EXT to indicate the power of the power, and then select the corresponding grid where the controller is located, and create a settings, but you need to select ins input.

At this point, the simplest Xnet network is completed, and it can only charge the controller.If you want to build a more complicated network, it is not recommended to supply power in this way, and the power supply to the controller is better.Note that the more the channel and the setting, the more power consumption. The X in the upper right corner can delete the extra network. This step needs to be confirmed. Click OK.

If you want to power other components, the operation is the same as the power supply to the controller, but you don't need to perform direct power supply.For example, the power of the solar generator to power the newly added basic energy cubic power.

Put the energy cubic directly next to the connector, then open the controller, select the corresponding grid of the energy cube, and create directly.

It's okay to change to a cable.

Of course, sometimes six faces are not enough. At this time, you need to use network cables. Note that only connectors and cables of the same color can be connected to each other. Only the connector can connect the components.The color of the connection element will be slightly darker than the ordinary cable.For example, we want to pass the boxes on the left to the right box.

After the correct connection, open the configuration. At this time, there will be two boxes. Pay attention to Double -click Gao Liang to confirm which box you want.

Of course, the transmission item cannot be placed with the transmission power of Channel 1. You need to create a new channel. The channels of the channel have been said earlier. Obviously, you need to select the item transmission, and then the box is to input which box is output.Of course, you should also notice that there will be more options for transmission items, such as the blacklist and whitelist, matching labels, etc. This will be used when needed, such as the raw material input of the nuclear fission reactor.

If you think that the transmission speed of the item is a bit slow, you can choose "Single" as "STACK" in the setting of the output box to change one item into a group of transmission.

The transmission of other substances can be created.

2. router

This part is mainly to make a foundation for wireless routers. Its role is to transmit items between two different basic networks, which can be used to solve the problem of too few channels.

For example, there are two networks here, and the nutrient slurry of the storage tank created in the network that has been established earlier should be passed to the newly added network of storage tanks.Place the router next to the router, and let the connecter open the routing network cable (different from ordinary connectors and network cables)

The channel of the router is connected to some metaphysics. Many tutorials use two channels to use the same name to prevent the connection chaos.It is known that the following configuration can be transmitted normally:

This is the router interface. The router itself does not require power supply and does not recognize the channel without names.On the right side of the input channel you want to input items, the text box on the right side of the input channel is written into the name of the output network corresponding to the output channel, and the name of the output channel is written in the text box of the router channel on the output network, so that it can be transmitted to transmit it.It's right.I try to describe at least at least so that I can understand

The router will manage the controller channel to open the name in the routing network (that is, the one filled in in your frame). The channel with the same open name and type will be connected directly together. On the right side of the router, other controllers can be seen on the side of the router interface.The open name in the route network (the public name is the green high bright one above)

3. Wireless transmission

Wireless transmission can be said to be the essence of this module, which perfectly confirms the low -cost and high transmission concept.This requirement for wireless routers.

If you want to use a wireless router, you need to build an antenna on it. It also needs to be powered by itself. The area where it is located must be loaded to work normally.

There are three ways to build antennas: only one antenna (100 blocks), two antennas (500 square meters), using antenna plate (extremely far, but not across dimensions).Put a wireless router in both points and receiving points.

The wireless router is directly connected to the routing network, and the other settings are the same as that of the router.

Wireless connection channels are different from colors and icons.

The wireless router itself has only one setting: whether it is announced.

总结:尽管听起来很带劲,但是这个模组由于各种限制(比如连接器供不起控制器的电,无法跨维度,传输速度慢,配置麻烦,无法保持自己所在的区块加载),他The use is only suitable for classifying items. Do not use it to transfer the substance simple and unidirectional. You will lose blood. If you have the ability, it is recommended to replace it with MEK's quantum transmission machine. Although it is expensive, it is stable and easy to use.