This tutorial is set by the author's setting without permission.
As we all know, immersed crude oil has been changed in version 1.18.2. Almost all the previous methods were invalidated. So how to get crude oil in the 1.18.2 version?
This tutorial will teach you how to get crude oil in the immersive crude oil in version 1.18.2.
(Note: Be sure to add I18N! I18N The problem that the immersive book cannot be opened has been solved)
First, look for oil
Different and previous versions can no longer be found with rock core drilling, but should be used to use a shock wave probe.
Figure 1 The shock wave probe
Right -click the shock wave detector holding a deer, put the deer into it, and then right -click the shock wave detector to start it. As a burst and shake, you will get one of the two detection results.
Figure 2 probe results
The first detection result is not an animation in the hand. Open the item bar and put the mouse up to see what the oil collection, content, and expected pressure (extraction speed) here.The storage includes water, magma, and crude oil; if it is water or magma, try to go a little further before trying it.(Don't really find a crude oil as soon as the Europeans start)
Figure 3 The first blueprint
The second detection result will display a map on the hand.
If it is such a flat map, I'm sorry, there is no place where there are any places. Change the place.
Figure 4 There is no map nearby nearby
If this is a map with obvious spots, congratulations, you are not far from a piece of oil.The white spots on the map are a storage.
(Note: The storage you detected is not necessarily crude oil, or it may be water or magma.)
Figure 5 There are maps nearby nearby
Red arrows refer to the north, each grid refers to a block (16X16 grid).
According to the principles of upper north and south, Zuo West and Right East, determine the direction of the collection; according to the grid, determine the distance of the collection.Open F3 and find the direction.
Figure 6 Data indicated in the direction in the F3 window
Take the corresponding distance towards the direction of the oil collection, and then use a shock wave detector to detect until you get the first detection result.
Second, oil pump
If you find the crude oil collection, you should get oil.Has anyone already made the hoe machine?
Drink it!Hom head machine now!No!superior!(As for how to use it, you will talk about it)
You should use drilling to build a drilling place where you just found a crude oil collection.
(Note: This drilling is a new multi -square structure that immersed crude oil in version 1.18.2. It is not a hoe machine that was immersed in crude oil in version 1.18.2.Structural projector)
Right -click on this light engineering block of the cross -clicking quasi -stars by an engineer hammer to form a drilling.
Fig
Figure 8 drilling
(Note: Drilling can only work above the sea level, that is, y> = 64 or more. If you place it below the sea level, the drilling will directly strike!)
Open the drilling, Gui is as follows:
Figure 9 Drilling GUI
1: fluid groove, as for what to put, say later.
2: Pipeline grooves, infusion pipes of immersion projects.
3: Configure the interface button, click on the configuration interface on the left button, and then talk about it later.
4: Electric grooves to observe the power.
First configure the drill and open the configuration interface. The GUI is as follows:
Figure 10 Drill configuration GUI
Select the coordinates of the crude oil collection before the drilling, and click the settings to complete the configuration.Point off the configuration interface, start to pick oil.
From the input port (the mouth with a blue dot on it), the drill input liquid concrete, stuff the infusion pipe into the pipe tank, and then call the drilling. It starts working.
Figure 11 Drilling (1)
When drilling to 30%, there is no need to enter liquid concrete.From the input port (the mouth with a blue dot on it), enter the drill in input water, plug some infusion pipes into the pipe tank, and continue to call the drill, and it continues to work.
Drilling in Figure 12 (2)
While drilling, quickly build a dozen liquid storage tanks to store crude oil.Use the infusion tube to connect the storage tank to the output port of the drill (the orange point on it).Must be fast!If the drill is finished but there is no place to save crude oil, the crude oil will be sprayed from the top of the drill, causing a huge amount of waste!
When the drilling is completed, if there is a crude oil into the liquid storage tank, then it means that you succeed and successfully obtain crude oil!
(Note: When the drilling is completed, the drilling will automatically output crude oil. It does not require water, electricity, pipeline, and crude oil output speed depends on the expected pressure of you before the crude oil collection.)
I finally got the oil, the problem came, what did the hoe machine do?
This has to be waited. When the drilling is drawn to the oil, it should be unveiled.
(Note: In fact, as long as the drilling is completed, the hoe machine can pump oil, but the cost -effectiveness of the scratch machine oil is low in price than drilling oil.machine.)
Different from the hoe machine that was immersed in the crude oil before 1.18.2, the hoe machine that immersed the crude oil in version 1.18.2 cannot start smoking in one place.When the drilling is completed, a pipe that is directly connected to the base rock will be formed under the drilling.When drilling the oil into it, it can be dismantled, and you can see it.Figure 13 The tube below the drilling
When building a hoe machine, the steel scaffolding at the front of the hoe machine should be aimed at the tube.Ensure that the hoe machine hob heads should be on the top of this tube.
Figure 14 aimed at the hoe machine of the tube under the drilling
Give the header 1024rf/tick electricity, and the hoe machine can draw out the oil that can not be drawn out.
At this point, you are also an entry -level immersed crude oil version 1.18.2, let's get oil!
