This tutorial is set by the author's setting without permission.

Introduction is well known that GCY's epoxy resin production line in the HV stage is very simple (sincere).But after entering EV, there is a huge difficulty in front of us.Originally, GTCE should be directly generated to generate platinum ore and directly furnace furnace to furnace.但是加入GCY之后原本应该生成的铂矿石莫名地变成了铂金属粉矿石，而且铂金属粉矿石中居然含有10种金属（铂、钯、铑、钌、铱、锇、铼、金、铜、Nickel), the steps are very long, the longest steps are even 10 steps (铑 treatment lines), and they run through EV and IV stages.Here is a detailed processing method for platinum metal powder ore.

Regardless of the total map, put a general picture here (made with XMind).

General map

Detailed explanation

As we all know, as long as the processing line of platinum metal powder is seen, the ore has a main product (platinum metal powder) and two by -products (rare metal powder, tadpole metal slag powder).The three products are marked with yellow frames in the general picture.

All products of platinum metal powder ore

Treatment of the main product

Let's start with the main product of platinum metal powder.The theoretical output of a platinum metal pink ore is 8 units.In the treatment of platinum metal powder, in addition to the need for UV voltage, the output of platinum and 钯 can only be completed by EV.

Platinum metal powder is added to the chemical reactor (mixed with hydrochloric acid with hydrochloric acid with hydrochloric acid in the mixer) in a chemical reactor, which can obtain concentrated platinum and platinum powder.

Preliminary treatment of platinum metal powder

Platinum, 铼, 铼 treatment

It can be seen above that platinum powder can produce two products.First introduce the follow -up processing of concentrated platinum in detail.The concentrated platinum adds ammonium chloride (ammonium chloride in a chemical reactor with ammonia and hydrochloric acid in the chemical reactor) in a large chemical reactor (large -scale anti -refusal). Two of them have nothing to do with the results.

Concentrated platinum treatment

Platinum line

Platinum line is the main production line and the simplest production line.Clean platinum powder and calcium powder in a large -scale anti -China synthesis to get platinum powder. Platinum powder can be fired as platinum ingot (firing without pictures) in the furnace.

Platinum line processing 理 wire

The lines are relatively complicated, and the most of the general map may be seen.

1. Fulfinamate synthesizes the salt powder in the chemical reaction kettle.

2. In the filter machine, the 95%probability of obtaining metal powder is obtained.

3. Metal powder and pheasant ammonia generate salt powder in the extensive anti -medium anti -gangs, and then precipitate the powder.

4. Salt powder continues to synthesize the metal powder in the filter and repeat step 3 to perform a circular action.

5. Refining pink powder and methic acid synthesize pink powder in the chemical reactor, and generate ammonia and acetic acid (the synthetic speed is extremely slow here, and it needs to be synthesized for 15 seconds under EV voltage) (what new type of acetic acid synthesis).Burning powder under the power blast furnace is made into a ingot (not matched with pictures).

The production method of methic acid requires two steps. The first step is to sodium hydroxide powder and sodium carbonate synthesis, and the second step is sodium methampate and sulfate synthetic methic acid.

Platinum metal powder cycle

As we all know, there are three products for concentrated platinum meridians. In addition to dense platinum powder and 钯 钯 ammonia, what are the remaining platinum salt powder?Here are two processing methods. One is that one is to directly enter the screenwriter's 95%probability to obtain refined platinum salt powder.The first type is introduced here, that is, platinum salt pink into the filter to synthesize refined platinum salt powder.

Then refine platinum salt into the power blast furnace and burn it into platinum powder.

This is the cycle of platinum metal powder, which can recycle part of the unsolved platinum powder, with a recovery rate of 59.375%(that is, 10/4/4*0.95).

Tadpole

Note that 从 does not have to be obtained from here, Huibeng ore is the better solution.

The above -mentioned second method is introduced below,

1. Add 心 separation mixture to synthesis in the centrifuge, and the recovery rate of separation mixture is 80%.The separation mixture here needs to enter the UV stage before synthesis.

Get refined platinum salt powder at 100%.Platinum metal powder revenue reached an amazing 62.5%!

2. Wash the solution, sulfuric acid, and ammonia in the chemical reaction kettle to synthesize hypertrophydium.What new method of synthetic sulfate

3. Microfate and hydrogen synthesize the powder in the chemical reaction kettle.Burning powder is fired in the furnace to be furnace (not compatible with pictures)

铑, 理 treatment

The follow -up treatment of platinum powder is introduced below.Platinum powder, potassium sulfate powder, and oxygen are fired in the power blasting furnace (synthesis of sulfur, potassium powder, oxygen synthesis with potassium sulfate powder in the mixer) can be obtained. One of the products has nothing to do with the results.Essence

Tadpole

The 处 line belongs to the longest production line of platinum treatment, and it is also the key to open the door of the LuV (the LUV machine shell needs to be plated in the plate).

1. Sulfate and water synthesize sulfate solution in the chemical reactor, and another product of platinum powder -immersion slag powder (that is, 5 platinum slag powder can synthesize 112/27, 4.148 units).Together in the line.

2. Sulfate solution and zinc powder synthesize crude metal powder in a chemical dehydrator.

3. Cross -making metal powder and salt are fired in the power blast furnace to be salt powder.

4. Salt powder and chlorine synthesize the salt solution in the mixer.

5. Salt solution, sodium nitrate powder, oxygen, and nitrogen dioxide synthesize nitrate nitric acid powder in a large -scale anti -China.(Forgot the oxygen arrow here) 6. The probability of nitrate powder in the filter is 95%of the possibility of the pink filter powder.13 parts of nitrate can only synthesize 2 铑 filter powder, and directly call it (

7. 粉 Filter powder and water synthesize 铑 filter solution in the mixer.

8. The filter cake solution synthesizes the powder in a chemical dehydrator. The powder is first entered into the power blast furnace to furnace and then enters the vacuum freezer to cool the ingot (not worthy of the picture)

Damn the cable line is finally over (hi)

Tadpole

It is said that is the product with the lowest mid -production rate in platinum.The detailed introduction is given below.

1. Immersive slag powder and pure alkali are synthesized into sodium sodium pink and rare metal residue powder in the power blast furnace.Rare metal slag powder can be parallel.The first step came to Malaysia, and actually needed 40 dipping powder to synthesize.

2. Sodium sodium powder and chlorine synthesize sodium sodium sodium solution in the chemical reaction kettle.

3. The tetraoxide solution and steam are combined into the hot tetraxidal solution in the oil cracks.Your oil cracking machine is not serious (

4. The thermal tetraxidine solution is combined in the distillation room into a tetraonic oxide.If you have speed, you can try to use the distillation tower if you want to overclock.

5. In the fluid curing machine, the four oxidation is used to synthesize the four oxidation powder with a mold (ball).Is the mold ball out of the powder?

6. Tetraoxide powder and hydrochloric acid synthesize pink powder in the chemical reaction kettle.The pink powder is fired as a thermal ingots in the power blast furnace, and cooled in the vacuum frozen to cooler the ingots (not worthy of the picture).

Handling of by -products

There are a total of two associated with platinum metal powder ore, which are rare metal dregs and tadpole metal slag powder.The theoretical output rate of a platinum metal powder is 1.89333 units (not sulfate, soaked mood powder, rare metal residue powder), contain rare metals such as cymbal, cricket, and gold, and copper and nickel metals.

Tadpole

有 is a metal that requires demand since LV, which is used to make force field generators.You can steal chicken in installing mek (

1. Rare metal slag powder and hydrochloric acid synthesize acidic pyrine and metal dregs in the power blast furnace.铱 Metal slag powder and line.

2. The acidic solution synthesizes the pyrine solution in the distillation room.Players with speed requirements can try to use the distilled tower.

3. Cycid solution and hydrochloric acid synthesize pink powder in the chemical reaction kettle.Burning powder is fired in the power blast furnace as hot ingots, and thermal ingots are cooled in a vacuum freezer (not matching pictures)

Tadpole

最 As the rare stable element of Earth OL, it is so cheap in GTCE (laughs).重要 is extremely important in the IV line, and even has its figure in ZPM.After installing IC2, IC2 can steal chicken ()

The detailed procedures for the treatment are given below.

1. 渣 Metal slag powder is combined into the power blast furnace to become dioxide powder and mud dregs powder.The mud dregs is the first auxiliary production of metal slag powder.

2. Synthesis of acidic pyrine in the chemical reaction kettle in the pyrum dioxide powder and hydrochloric acid.

3. Acid pyrine solution and ammonium chloride synthesize chloride powder in a chemical reactor.

4. Chloride powder and hydrogen synthesize pink powder and metal mud dregs in large -scale anti -Chinese anti -Chinese mud.The powder is fired in the power blast furnace as a thermal ingots, and the thermal ingot cooled in the vacuum frozen to cooler the ingots (not compatible with the picture).Metal mud dregs is a second -yield of metal slag powder.

Line follow -up processing

After removing the cricket, the metal slag powder remains, and the mud dregs and metal mud powder are left.Based on the principle that the garbage cannot give up, this chapter is deliberately increased.

1. The mud powder is treated with silicon powder and gold powder in the heating centrifuge.In fact, it is even more cost -effective to digging hell rock gold ore.

2. Metal mud dregs are treated as copper powder and nickel powder in one step in the centrifugal machine, which is precious metal (convinced).

Conclusion

Regardless of whether it is the GTNH integrated package or GCY, the platinum ore treatment line has always been one of the criticisms. It is said that the earliest shit from Bartworks Bart.The EV Demon King Platinum processing line tutorial comes to an end, the next may be the production tutorial of ZPM wet processor.I was stuck here when I played GSE. Now I play TJ or stuck here (sad), I do n’t know when I can enter the UV pinch.