This tutorial is set by the author to use the CC By-NC-SA protocol.

Demand MOD: IC2 and Forestry MOD, and any logistics mod (I use BC by myself)

Demand materials: Forestry Tree Farm (taken for granted)

Plumber X2 (one uses and pour the saplings into a bran, and one pour some bran into soil)

Solid/fluid mixed installation machine (used to synthesize biomass biomass to mix bran and water)

The fermentation machine and the fluid heating machine are about five for fermentation biogas (mainly to ensure that the supply of fertilizers can keep up.Bare, in short, a lot of goodness, according to my needs, I used six fermented machines by myself)

Thermal generator or semi -current generator (both)

Any water pumping device (the BC pump that can pump free of charge is pretty good)

You can use biogas to generate RF energy production capacity installations (forestry's biogas engine and thermal compression energy furnace can be used, or you can try the semi -liquid generator biogas send EU electricity+forest power engine with EU send RF electricity, can also be possibleBy the way, reduce biogas losses, although it is too much to use)

In addition, the choice of tree species is best to have a large number of leaves of the leaves. Here is a show off the Gao Jin saplings my own hybrid.

principle:

1: IC2 can make sapling powder into bran and bran the powder into dirt.

2: Forestry automatic farming machines can use IC2 fertilizer (but the value of fertilizers is halved).

3: IC2 can mix the bran with water into biomas and ferment the biogas to get biogas, and this process will slowly produce fertilizer.

4: The tree field of the forestry does not have to be put in the humus soil, but it can also be put in the soil. The tree field will consume the value of fertilizers to combine the soil into humus soil.

According to these four characteristics, we can make a set of permanent trees based on the recycling and utilization of excess saplings.

First of all, make the excess sapling powder into bran, divide the bran into two copies, a fermented biogas, and the other to make powder into dirt

Then, a part of the fermented biogas piercing the fluid heater is used to maintain the fermented thermal energy itself to continue fermentation, and the other semi -current generator connected to IC2 respectivelyThe biogas engine can provide energy to the IC2 machine and tree field to ensure the energy supply of the tree field.

Finally, the fermentation process of biogas will produce IC2 fertilizers, which will

Put the soil obtained by the braning powder before.

In this way, the three elements consumed by the operation of the tree field: fertilizer, humus soil, and energy are available. Finally, the saplings produced by the tree field will automatically enter the tree field like other resources.The high -efficiency permanent tree field of wood and sapling is constantly produced.However, if conditions permit, the tree species is good. A sapling with excellent genes has a higher sapling drop rate and produces more wood. It is an excellent charcoal.

Note: You need to prepare enough biogas in advance to supply power, because the preheating time of this system is relatively long, and it cannot maintain a self -loop in the early days.

By the way, if you are unreasonable for the fertilizer of various automatic farms in forestry, the fertilizer of the forestry is unreasonable and IC2 fertilizer, you can go to the Config → Forestry folder to find the FARM documentation to add your own fertilizer by yourself, although the phosphorus oxyyone is said toIt is almost incomplete, but you can only use this kind of non -renewable resource without IC2, and other things that obviously can be used as fertilizer can not be used.

Finally show the negative line textbook I set up (the fermentation unit is underground)