This tutorial is from MC Encyclopedia (MCMOD.CN) using the CC By-NC-SA protocol.
Welcome to this tutorial
When you start a new world, you will find that this world is slightly different from the original world
Some of the original tools are durable and weakened significantly
Wood tools are durable at 6 o'clock,
Stone tools are durable at 11 o'clock,
Iron is 26 points durable,
Diamond 101 durable
All kinds of armor are also weakened, and the diamond jacket is only more than 50 points to durable
So don't make the original equipment
Equipment reduces the protection value with durability falling
Some formulas cannot be used (for example, three iron synthetic buckets)
Use the forged strip to form a barrel synthesis method to create a barrel on the anvil, just cool it.
The ore cannot be put in the furnace and directly melted (to be precise, metal ore) and so on.
But you will find that there is a book in your hand. The research manual (the creation of the archive is that the creative mode will not give this book)
All formulas and technology lines of MF2 are completed on it.
① The beginning of everything
Broken stones, primitive tools, carpenter workbench and research platform
The manual is not consumed when making a research desk.
First of all, you start the same tree as the original, and then make a synthetic table
Then synthesize another wicked carpenter workbench and research platform
You can get a small amount of sharp stones with empty hand to break a stone
Or put the soil in the carpenter's workbench, and you can constantly click to synthesize the gravel 1: 1
(Put the round stone with a hammer to get 8 pieces at one time)
You can get a large number of vines and sticks by holding the leaves to destroy the leaves
(There are a lot of quantity, basically one tree can get a group of more)
Use wooden sticks, gravel, and vines to synthesize the original stone tool.
In the research manual BASIC, there are hammers in the production tool, pliers, scissors, needles, heavy hammer, spoon, dagger, saw
In the research manual technology, click on the original stone tool
Ho, shovel, hoe, sword, ax, spear
There are also hammer, pliers, two tools
At this time you have a better source of gravel,
Put the stones in the carpenter's workbench, and use the hammer to hit the gravel 1: 8
Supplement 1: Regarding the Povery, all the picks (handover are not good) MF2 has a function. Right -click to see if the selected block can be tapped
Supplement 2: Regarding the hoe, although the arable land will fail, the MF2 will not be durable when it fails, and it will be durable when it is successful.
Supplement 3: Regarding the fire stone: Similarly, although the simple fire stone (formally translated: dry stone) in the early stage will not be durable when the fire fails,
Therefore, these simple tools are not as easy to damage as you think
Supplement 4: Regarding the saw, the sawing wooden board can get four wooden strips, that is, one tree can be used as two trees, and it can also be used as an ax
Supplement 5: Crane mouth hoeing, making road tools, hoeing the ground, right -click the road to change the road to the road, a block, the crane mouth can also be used as a pick.
Supplement 5: Re -picking, 3x3x3 excavation, the book is written in the book 3x2x3. As long as you dig a block in the middle and then use the heavy pick, you will find that it is actually 3x3x3
Supplement 6: Re -shovel, it will dig a large area of dirt sand or something, but as long as you want to dig the layer, there is a block on it, he will not dig
Supplement 7: The arrows can be recycled. After the creatures are hit, they will fall to the ground when they die
② Personal suggestions, you have to do the running picture instead of finding a pit to start mining
Due to the poor performance of the starting stone tools, the iron ore cannot be excavated and handled
At the same time, it takes a lot of materials to develop, so it is recommended to run around on the first day.
The bronze ore tin, which can be excavated in the early stage, is generated by the height of the surface.
So you can be discovered like coal on the surface with naked stones
Limestone also generates very large on the surface.
Kaolin (unable to excavate) is a necessary material for making various melting furnaces
Borax (high -grade solvents, need level 2 picks) are the most saved iron ore -made iron ore -made iron ore in the process of processing
Multi -grass gets wheat seeds
The berry is a very good food source in the early stage (the berries right -click to collect, and the shrub needs scissors to collect it). The berry bushes are the same as the grass, and the bone meal can be brushed out.
After eating, you can eliminate hunger and replenish your strength
There is also a probability of getting juicy berries, which can detoxify
The soil containing clay, excavation will get clay, it is convenient to dig directly into the river, and it will get a small amount of experience
Unprocessed leather: The leather is no longer the patent of the cattle, killing sheep, pigs, etc. will fall (including their cubs, the animals that fall off the small leather will not have their cubs).
Unprocessed leather is divided into three types.
All kinds of relics, although they cannot be strategically not strategically, can be recorded first
③ When you are ready to settle down, you can almost prepare a smelting metal
First of all, you need to prepare some stones for synthesis
Then you need to prepare
Ivillest stone forging furnace forging iron furnace
Sink leather blacksmith clothing
Stone hammer
[Consult the formula of the above items]
Mineral treatment
Put the ore and coal or charcoal 1: 1 in the forging iron furnace
Right -click to ignite at the top of the forging iron furnace (pay attention to the above of the forging iron furnace, you must not stop it, otherwise you can click 10,000 times)
After the firing is completed, the burning metal block appears on the forging iron stove. Do not dig it. If you dig it, you will be gone.
Use a hammer to hit a melting metal strip
Then you can pick it up by holding the pliers.
Make more stone anvils and place hot ingots to avoid always the trouble and waste of re -heating
Piers with a handheld folder, right -click the top of the anvas, you can put it in, right -click the sink cooling
You can also directly click the water cubes to cool, but it will cause the durability of the items to decrease
Metal treatment and tool production
Obtain metal bars after metal melting
Metal strip sneak right -click can be stacked on the ground
To make other items with metal strips, other items need to be heated to fordable temperature
When heating, you need a stone forging furnace. Right -click on the handheld metal bar and put it in one at a time
You can directly open the GUI and put it directly into a group
The more you put, the longer the heating time
But if it has begun to heat, it cannot be added through GUI,
But at this time, you can still right -click by hand holding a metal strip to add
Generally speaking, a coal or charcoal is enough to heat the metal to the can create a temperature
The later temperature is not enough to use the fan box
The final temperature is determined by the last additional fuel, so you can also add a high temperature material
Coal: 1500 uses the fan box to heat up: 2250 fills the quantity 7
Charcoal: 1800 uses the airbox to rise: 2700 fills the quantity 5 (very useful cheap fuel)
Coke: 2500 uses the fan box to increase the number of 3750 filling quantity 5 (expensive and useless fuel)
The following three types of fuel putting ordinary forging furnaces will start burning
Flame stick: 3000 uses the fan box 4500 to fill in the quantity 40
(The burning time is too short, and the flame flour can be burned, the temperature is the same)
Magma cream: 4000 uses the airbox 5000 degrees to fill the quantity 2.5 (almost perfect fuel)
The amount of magma 5000 fills 2.5 (mainly the magma barrel cannot be stacked)
Ordinary forging furnaces filled with fuel can burn for 12 minutes and 30 seconds
The capacity of senior forging furnaces is twice as ordinary, start with redstone signals
After filling the fuel, the material will still be consumed, but it will not increase after the fuel reaches the upper limit.
It cannot be forged by the metal more than the forging temperature.
Directly ignited forging furnace interaction will be ignited
You need to wear arterymers. The blacksmith clothes are only durable. If you are hurt, it will be easily damaged, so do not wear waves everywhere.
And blacksmith clothes can only prevent the interactive damage of forging furnaces, and there is no fire resistance in itself.
The heated items will be deducted directly on the body and will deduct blood
When you make a Chinese or heavy armor, you will be immune to the fire, you can directly hold the ingot in your hand
Metal strips and various materials that are heated to appropriate temperature are placed according to the formula
Then use the hammer to hit
There are two horizontal bars when hitting
The yellow above is the progress bar, and the progress bar is full for forging
The green in the middle of the red on both sides is the quality bar, and there is a blue square scale in the middle
Every time I left or right -click the progress of the upper progress, the scale below moves left and right
The closer to the middle scale when the forging is completed, the better the quality of the item
If you feel too far away from the middle deviation when you finish it, you can shrink the progress bar through a stealth tap
Or take out the material reset
The finished items can be taken with a pliers right -click, and right -click the sink to cool again
Right -click the water cubes can also cool items, but if cooling is durable items, it will cause durability to decrease
In terms of forging, different materials will get different durability
Take a bronze pick as an example
An ordinary oak handle bronze pick, durable is 200 points
If you use exquisite wood, you can reach 300 points durable
Use eucalyptus wood to have 450 points durable
If the finished product is a boutique, you can get double durability
(The finished product is a boutique tool for composite metals or 7 -level materials, then this finished product is unlimited and durable)
(However, the attributes of composite metal tools are not very good. They are the same as ordinary steel, but the armor performance is very good, which is similar to red and blue steel.)
(There is no need to pay attention to durability loss in the early stage. After level 50, there is something called gorgeous maintenance tools.
Regarding the handle: As long as the waste wood handle is used, the original wood is almost the same, dark oak is the best (dark oak> Jinhehuan> jungle wood, oak> birch spruce).
However, in the early stage, a clay jar and a wheat seed can be made of exquisite wood, which is better than the original wood.
The best module materials are ebony, followed by eucalyptus; purple shirts and exquisite wood are a grade. Exquisite wood is produced. Can the other three types find luck.In terms of cooling, incorrect cooling methods can lead to durability loss
Take an eucalyptus boutique oak pick as an example
Durability is 900/900
If you use pliers and sinks to cool, durability is 900/900 (100%)
If you use pliers to click the water to cool down, durability is 675/900 (75%)
If you pick the right -clicking sink to cool your hands, durability is 450/900 (50%)
If you pick the right -handed water cube with your bare hands, the durability is 225/900 (25%)
Incorrect cooling methods will not affect the maximum durability, only durable loss
If it is cooled some unspeakable items, you can use this method
Note 1; although the iron stove can be burned out of the iron bar,
However, it must be a craft level 10 and unlock the smelting iron skills to use iron to create items
Special precautions: When you reach level 10 of the craftsmanship, in addition to forging iron, you can also unlock a multi -square melting furnace technology. You can burn 4 items at a time, and the finished product is a metal strip
The stove accelerates as the temperature increases. When the temperature of the stove reaches the white strip, put the box on the side to use the aircraft to continue to increase the temperature.
(Special reminder, if you have made a lot of production when you see it here, you can throw them through the recycling station ← _ ←
Note 2: Class of metals such as copper tin can create various items such as iron barrels, gold, silver can also
Note 3: When you get copper or tin bars, the first thing you want to do is not to create anything, but to throw them into the pupa and make bronze
一 You can put a bucket of magma directly below for heating. Although this speed is a bit slow, it does not consume fuel
By the way, a few crickets, stones in the early stage, and then high fire resistance.
The mechanical part has a high -level 果, the effect is the same as resistant to refractory.
You can use forging furnaces as a heat sources, and go in to the funnel ore card card for an output
It is a high -end leather machine in front, and later is a senior forged furnace controlled by redstone.
The last one is in the ruins of the ancient law, and you can’t dig away.
Fill in the last figures of the last gates around you to activate the last shadow eyes and activate it
You can also use the orb of Sanyi to be promoted to the level once
Finally, if you really don't want to go out to mining, you can try hand picks. Although it is less durable and the excavation speed is slower than the ordinary pick of the same level, he can get some other items when digging the stone (specifically you can view the hand pickCord)
When you unlock the iron or steel and have a enchanting table, the handover of Yunyun Three when a magic attachment efficiency is durable can give you a lot of surprises
Finally, add a solution to 100 % forging. When the items are placed, there is a chance to have the same way to click on the mobile distance when forging.
You can refresh it by constantly taking out items (version 1.12 needs to switch the formula to refresh. For example, a pick can remove a metal and become a hoe formula, then put it back and change back to the pickup formula., Can only try more)