This module is an auxiliary module of the artisan soul, which is relatively unpopular, and the information is not complete (in fact, after being filled by the big guys, the information is now complete). This tutorial is specially compiled.

Version: Minecraft 1.12, Module Version: Moar TCON 1.9.0_0 (can be downloaded in PCL2), and all its front mods, and artisan soul armor, artisan soul armor expansion

Recommended materials

steel

Place a bunch of carbon (synthesized by 4 coal) on the casting platform, and then pour the melting iron with a amount of iron ingots on it to get the billet

Throwing the billet into the smelting furnace can get this important material

Its excavation level can reach obsidian (diamond pick -off), and the attributes are also good. Personally recommended that it can be used as a combat brand handle (the card is used for fairy palm).

Steel is also one of the important materials for making alloys

Irradium (Irradium)

The ravia ore generated by about 20 floors can be excavated with the ore ore (excavated diamond). It is distributed on all levels of the underground (personal recommendation to <30 places). It is easier to find it to find it.

There are good attributes in all aspects, and skills are also very practical ("power" allows you to be faster and faster when you continue to dig the block)

Among them, the specific effect of "beneficial radiation": At the moment of attacking the entity, the attacker can obtain strength Ⅱ effect, and enable the attacking entity to obtain 3S wither Ⅱ, emitting Ⅱ, and weak Ⅱ effect.

The armor has the same effect.

Next, dig obsidian (remember to take Obsidian and upgrade your pick) and go to the lower bound to collect materials.

By the way, there is another ore excavated in the early stage, namely Garsstone.It can be obtained by digging over the load crystal ore, and only stone picks are required to dig:

It is not outstanding as the material effect (relative to other materials in this module), but it is an important synthetic material for special components:

The problem is that the chance of the generation of overloaded crystal ore is very small (it was found for a few hours to find it), and it is generally only generated on the surface of the biological group in the mountains (ancient name: cliff), so it is not easy to find.(If you are from the top of the mountain, then I didn’t say it)

A personal trick: you can go to the side of the mountain peak to see if there are ore covering the snow: the overload crystal ore covered by the snow layer

Materials recommended in the mid -term

Rune Steel

A alloy composed of obsidian, Adid, steel, and gold, has less output

Only so many materials are so rune steel in the end .........

However, its attributes (mainly the basic values ​​such as attack power, armor value) are high, so it is a good material.

Then go to the end, there are more strange materials waiting for you.Last Shadow Dragon, Dangerous

Echostone (Echostone)

It is often generated on the edge of the Landlord Island/outer island. If there is a flying method, it can be easily found:

(This is armored data, the skills are the same when used for tools, attack power 10)

Its basic values ​​and skills are good.Before version 1.9.0_0, it will be generated into pieces like a picture (so that a bunch of it can be easily found); but after 1.9.0_0, it will be generated in the form of echo stone ore (in this way, echo stone will beIt's scarce, but you can still find some).

"Afterimage" is an exclusive entry of the echo stone (this translation is really good). It will make your tools have a chance to hit it once an extra time. This additional hit will cause greater damage and repel.When triggering the "residue", a "DING" sound effect is played.

Endral &&

At the bottom of the main island/outer island (basically the void below!), You can find the Endral ore.It is difficult to collect, especially when there is no flight:

The last shadow crystal ore generated at the bottom of the main island

But it not only has good attributes (see above), but also can be used to synthesize another quite good material, that is, Endrexamite Composite.

The production method of the last shadow alloy parts is a little different. It is not to cast the molten last shadow alloy on the mold, nor is it directly produced on the component processing platform.The Cavaliers Slime is poured above:

As one of the recommended materials, its attributes are naturally very good.While inheriting the folding of the last shadow crystal, the pulse attributes, and the collapse of the Cavaliers Slim, the sticky attributes of Slim, and the "elasticity" of the exclusive attributes of the last shadow alloy:

As a armor material, it has a basic armor value of 49.5 points, which is almost equal to the three -color alloy (50 points), and it is slightly higher than the echo stone (45 points).

Both the last shadow crystal and the last shadow alloy have "folding" entries. I personally think that it is one of the most powerful entries in the original artisan soul (originally the entry of the Candy Candle).Make arrows with these two materials.

Gravitonium

This is an important synthetic material for making triple -color alloys (Trichromadentium). It generates an empty island in the high -altitude of 120. It is very rare.

Left: Gravity ore; Right: Gravity of Gravity ore

Gravity under the effect of night vision

It is recommended to have a flying method and collect it (my face is black and more than 10,000 square meters before it is found)

Individuals do not recommend using it as materials, because the effect is not outstanding, and it has more important uses.

Void SPAR

This is a magical ore generated under extreme conditions (the main world will generate void crystal ore below 10), and it is also a almost only way to obtain a base rock mining ability in this module.

The void crystal ore generated in the main world base rock formation (in this picture is the bottom of the magma pool) in extreme environments

There are two forms of existence in this ore: void crystal ore and base rock void crystal ore.When there is no base rock excavation ability, we can only dig the former (digging the level of level iron).The figure below is the base rock void crystal ore generated in the base rock layer (taken from the void):

Since it may be void directly after digging, please pay attention to the height, don't fall down.

Both ore can get the void crystals.Its attributes are as follows:

The botttom's END entry allows you to excavate base rocks and base rock ore.

In the 1.9.0_0 version, the base rock can be excavated and dropped by tools with the Bottom's END attribute.When the base rock below 1.9.0_0 below, the base rock will first go around a layer of purple light to become a discabilized bedrolk to complete the foundation after the excavation is completed;Keep flashing and stop after a period of time (about 20 seconds).

The base rock mining ability of this material will lead to another important material of the later period -Bloodstone.

Special materials: Techno's blade

The so -called special materials are parts that can only be used in this module that can only be used for synthetic specified tools (or weapons).Another special thing is that these parts are not obtained by processing or casting, but directly synthesized on the workbench.Is this a game setting of this module?

At present, this module has added a total of 5 special components, and the blade of Techno is one of them.I would like to mourn the hemons Technoblade

The key material required for this component is the overloaded crystal mentioned above, and the center of the synthetic table is the raw iron blade.The rest are the original materials.

This component can only be used for the synthesis of the big sword, and it will report an error when the synthesis of other tools (or weapons): when trying to use Techno's blade synthesis to synthesize the Western sword

Its basic damage reaches 15 points, and the attribute can be described as "bloody":

The actual effect of the "Blessing of Blood God" is: when hitting the enemy, the blessing BUFF gives you 2S blood gods, the BUFF effect adds 2 points of attack damage for each level.Multi -hits can make the level superimposed and reset the 2S time.The measured entry is quite excellent (after all, it is Technoblade endorsement), which can play a great role in actual combat.

Later materials

Three -color alloy

It is a very powerful material to get it into the smelting furnace by "fully filled the three -color alloy gravity 鎓 sponge".

Production process: Make gravity 鎓 sponge with gravity, and then fill in the casting basin.During the filling process, a large amount of cobalt, ravia, iron, obsidian, formula:

2*Three -color alloy ingot = 1*Full filling three -color alloy gravity 鎓 sponge = 1*gravity 鎓 sponge+8*iron block+8*cobalt block+8*radium block+16*obsidian gravity 鎓 synthesis of sponge

The nature of the three -color alloy

Its skills and basic values ​​are great.Holding three-color alloy tools (or when wearing three-color alloy armor) will have a particle effect out of the feet to remind you what color you are in-that is, when its skill function holds the three-color alloy toolThe particle effect in the red "area

In the "red" area, the effect of strength will be given.The actual measurement uses the three -color alloy sword (basic attack power 17.7) in the red area can cause 29 points of damage

In the "Blue" area, you will continue to "return blood" for you (the golden blood bars above the red blood volume bar are similar to damage absorption)

Bloodstone (Bloodstone)

A ore generated on the top of hell base rock only exists in the base rock, so it is necessary to mine with the botttom's end entry.

Bloodstone (informal translation: bloodstone) ore generated above the top of hell base rock

Bloodstone ore will form a hill with hell rocks and obsidian, and each hill can be dug a considerable amount of bloodstone.

As for how to go to the top of the hell base rock layer, of course, use a tool with Bottom's END entry to dig off the base rock.(It is not recommended to use the last shadow pearl, TNT and other cards, because the module provides a solution)

As a later material, its attributes are naturally pretty good:

Among them, slicing entries can allow the hit monsters for more than ten seconds, and do not conflict with the "bleeding" entry; Leeching entry allows you to get 10%of life reply after about three attacks.(The measured two entries are really scary).Various basic values ​​are also horrible, and 50 -point armor value is equivalent to three -color alloy.As an arrow pole, its additional ammunition value is 80, the highest module is the highest.(Although the strengthening is only 2.35)

Fusionite

In the depths of the main world (base rock layer), there is an extremely rare ore, that is, Fusionite ORE:

The fusion material panel obtained by melting is not bad, but maybe it is a bit worse than our request:

Among them, Cold Fire is an exclusive entry for the fusion material.

The attack power of the fusion is 8 and the armor value is 36. It is not particularly outstanding in this module.However, don't be disappointed, we can also process it.

Sun Steel (Solar Steel)

This is a alloy that is divided into melting fusion, hydrogen (hydrogen existed in the smelting furnace with liquid state!) And melting steel, the component ratio is 1: 1: 4, which can produce 4 melting sun steel:

Hydrogen can be obtained by melting hydrogen -rich red stone powder: synthesis of hydrogen -rich red stone powder

In this way, a fusion became 4 solar steel (proliferation reactions).

Its attributes are also quite good. It has 14 points of attack and 50 points of armor care. It also has attributes such as automatic smelting and overheating:

It is better to use the effect of reinforcement when cooperating.

If you think that solar steel can't satisfy you, we can also upgrade another change.

Time and space disturbance (disruption)

How expensive this material is, just look at its synthesis table: The middle thing is a gathering block

Although it is expensive, it is a very powerful bow arm material. The speed of pulling the bow is only 0.01 (there is a saying that one is really outrageous), and at the same time, it has 8 points of additional damage and 3 -point range coefficient:

Use it to make a short bow, plus the enhancement of quartz or redstone, with a good arrow, it is a very terrifying long -range weapon.

Practical item

Material reconstruction gel

Can be used to repair any tools and repair 256 durability.The synthesis is not complicated. You need to use the casting table to pour the Cavaliers Slim to the rich hydrogen -rich red stone powder:

Example of material reconstruction gels

(Actually, if you really want to repair this way, you should use the durability to be low, otherwise it will be a bit waste ...)

Gravity Pour

A special pouring mouth can flow out of the fluid in the smelling furnace at a rate of 6 times.Synthesis requires 3 gravity ingots and 1 ordinary pouring port:

The effect of the gravity pouring mouth on the mouth of the smelting furnace drainage

Linked material

This module has a linkage with modules such as Twilight Forest, staggered dimension, and can get some new materials after being installed together

Twilight forest

Penguinite (Penguinite)

Throwing the penguins in the Twilight Forest into the smelting furnace, you can get melting penguins (so cruel .... It is strongly not recommended for people who love small animals)

A penguin threw into the smelting furnace to get 5 penguin -grained melting penguins.Making of Penguin ingots

The attributes of penguins are also good. In the early and middle period, it is a relatively good material: the attributes of the penguin material

If used as an armor, you can also provide a basic armor value of 31.5 points.

Ferroherb Composite

The production method of steel leaf alloy components is similar to the last shadow alloy. It is not to cast the melted steel leaf alloy on the mold, nor is it directly produced on the component processing table.The melting iron tree ingot is poured on it: the production of the steel leaf alloy handle

Each time you consume a melting iron tree with a volume.

The attributes of steel leaf alloys are also very good. It is recommended to use this material in the medium term.(Especially at the same time, there are two skills: sharp and broken skills)

strengthen

The module provides some new reinforcements, and some of them are very powerful, so they have to mention.

Crushing

On the tool assembly table, using iron blocks can be used to destroy and strengthen weapons such as big swords, long swords, western swords, combat brands, hammers, split swords, etc. (in fact, can also be available and shovels, etc.) to be destroyed and strengthened:

Specific effect: Transform 10%damage into real damage.Real damage will ignore any damage reduction methods (such as armor, potion, damage absorption, etc.).Can be described as quite powerful

Any weapon or tool can only be "destroyed" once.Two iron blocks will be consumed every time strengthening:

other

Of course, there are more than such materials in the module. Other materials are also very interesting, such as various "special" materials.

This tutorial allows reprinting and no need to inform me in advance.

This tutorial will continue to be updated in the later period. I hope to write all the materials and acquisition methods of all the materials of this accessory module in this tutorial, and give this module complete development ideas.

Due to my limited level, if there are errors or omissions, please also point out!I am grateful!