This tutorial is set by the author to use the CC By-NC-SA protocol.

First of all, thanks to the video of the main Ouyang Zihao of station B with the video of the main Ouyang Zihao with inspiration and allowing me to issue this tutorial, let me transform it according to his device, and improve the version adaptability. Now this set of devices can theoretically in any in any wayUse a version of plant magic.

This is the video link of the UP. You can first look at this as a reference to the magic rune automatic synthesis_Bilibili_bilibili

Then there are some precautions for the device.

1. The essence of this device is a stack of 16 modules, so you can increase or decrease the module freely according to your own needs, for example: you do not intend to make seven sin runes, then reduce the number of single pieces to 16-7 = 9 of them, Or directly reduce it to one, it is not impossible to rub it yourself.

2. When you do it yourself, the box of the runes on the item display box. Remember to rotate the rune right -click a few times. Otherwise, the runes can only be recovered after two.

3. Two sets of multimedia systems should be copied in place. If the multimedia funnel is the same as the multimedia spark color installed below (even if the same network is used), the input of the items below will have problems.For example: you rotate the item display box on the multimedia funnel, and let it enter 64 runes at a time to the box below. The multimedia funnel input wind will only enter 64, until you clean up the box to the internal to this to the internal.There are less than 64 runes.Therefore, the multimedia sparks used by multimedia funnels and boxes below must be two different sets of different systems to ensure that the runes are entered normally into the box.

4. This relay in the rune full box detection part of each module needs to be adjusted to 2 gears. Otherwise, when the signal input is switched to the next rune material module when the signal input is switched to the next rune material module, it will beActivate the piston before the signal disappears, and push the wooden board upwards, causing the wooden board to be charged by the non -disappearance of the signal to make the signal lead the next module. As a result, enter the two rune materials at the same time.Although even more input, it will trigger the anti -repeat input system, so as not to waste materials.

The following is a preview diagram and archive link (four preview diagrams actually only one size meets the requirements ...)

Link: https://pan.baidu.com/s/1h8c-dbwafxkt-5a2nasklg? Pwd = 6xmt

Extract code: 6xmt