This tutorial is set by the author to use the CC By-NC-SA protocol.
The full version is available, and the unbounded volt version can be matched with other storage modules
youtu.be/ rlqdofbwlww
There are only two parts of this device
Receiver
Conveyor
The power transmitter on both sides should be tied to the red frame on the other side
Remember to use a square around the above one grid of the magic transmitter
When the signal starts (which end you can design it yourself, use the power transmitter+magic detector to the magic transmitter of the receiving end*that is the smooth stone+button*send the red stone signal)
Generally speaking, it will start on the receiving end.
The overall device is like this
At the receiving end, the pulse destroys the velic box, and at the same time, the conveyor end starts timing (at least 7 items, one more timely item received by one more timely item, or you can change to any timing scheme or unloading scheme), time is upPulse recovery world voltage box of the rear transmission end
Of course, you can also do empty box detection on both sides and pass the signal with the pulse
The fir wooden barrel below the receiving end can be used to store receiving items, and how to use these items according to your needs
The boundary box will often be at this position at the conveyor side at the position of the block state
You can change the funnel and trap storage box above to any item packing solution. This is just a demonstration
Placing magic slates in the boundary box can pass the magic unlimited distance. At the same time, it can also be used as a magic battery. The storage limit is the maximum number of slate you can do.
Make magic ponds on the teleportation end, make slate on the receiving end> Magic Pond
The transmission is almost no magic consumption, and the magic pulse of the magic pulse when the box destroys the box is only 160*2
At both ends of the two ends at the border to the border (about 60 million grid distance), the transmission scheme is not delayed, and at the same time, energy consumption can be ignored
If the magic power is passed with a slate, the magic pond and the slate are transferred to the magic power 0, and the pulse is already all consumed.
