This tutorial is based on the various basic usage of Tom's simple storage.

Detailed explanation of how to use the block of the storage cable connector to establish a multi -base station wireless storage network.

The game version used is forge 1.19.2

First of all, you should understand that the structure of the storage network is shown in the figure below.

Regarding this structure, the point of note is that the storage cable connector must be connected to the beacon block, but on the beacon, it does not affect its function.

At the same time, the storage cable connector must be directly connected to the storage drive through the storage cable.

In addition, although an undefeated beacon can also be identified by the storage cable connector, the storage structure cannot be incorporated normally.

Right -click on a storage cable connector connected to a storage cable connector on the beacon, or the item that holds the right -right mobility to open the setting panel of the storage cable connector. If the operation is correct, this should be the panel you see:

To establish a new network frequency band, you should enter any name in the horizontal frame above, and then click the "+" on the side.In fact, it can be established without entering the name, but after all, it is not beautiful.

To delete the selected frequency band, just click the "X" on the side, but the frequency band will not disappear immediately, and it will be displayed when the panel is opened next time.

After establishing a frequency band (as an example of "Internet 1"), the frequency band can be selected in the frequency band list, so that the storage cable connector is bound to the frequency band.

Ren Yicai storage cable connector can only be tied to at least one frequency band, and the storage cable connector that is bound to the same band can be counted as the same network.

Under normal circumstances, the frequency bands established on any storage cable connector can be displayed in other storage cable connectors. If it fails to display, you can try to re -place the storage cable connector.

To play the connection function of the storage cable connector normally, you should also select the connection type of the storage unit in the upper left corner of the settings::

For Access Remote Inventory, the storage unit can access all the storage line cable connector of the same frequency in the same frequency through storage terminals or synthetic terminals (of course, can also use binding wireless terminals or advanced wireless terminals) to access all in the same frequency band to the PROVIDE Inventories for Remote Access cable connector.The items in the connected storage driver are not provided to the storage drive connected to the storage cable connector connected to the storage cable connector of the storage cable connector set by itself to the storage drive of the storage drive.vice versa.

Regarding the lock sample (