This tutorial is from MC Encyclopedia (MCMOD.CN) using the CC By-NC-SA protocol.

The clay industry is a Japanese MOD. This MOD, as its name implies, uses clay as a MOD for making various black technology as materials.Periodic is one of the main characteristics of the clay industry. This MOD machine has Tier0 to 13 14 stages, and the characteristics of each stage will be briefly introduced later.

There are not many current worlds in the clay industry, there are three types of ore:

Clane:

One of the main sources of clay, the rough estimation of the tough clay that is tapped from 4 to 16 can be affected by the time of time. Sometimes the drop in the fall will increase significantly, but it will not exceed the range (4 ~ 16)Generate height Y -axis 22 ~ 48.

Dental clay ore:

The ore is mixed in the ore veins of clay ore attached to clay ore. The original ore that is mixed with the veins of the clay ore will be tapped and dropped.

High -density clay ore:

Generate height of 10 ~ 16, dig out the original ore, and obtain advanced industrial clay fragments through clay grinding machine.

Tier0: (Note: Different items that machines can be made at each stage can be made only when some items reach the level of the machine. Please check NEI for specific machine levels)

Let's start with Tier0, there are three things in total.

Dental clay, clay workbench, clay synthetic board.

Dental clay: synthetic materials are synthesized by 9 clay blocks.

Clane: This machine is a machine that must be manufactured in the early stage of playing the clay industry. The part of Tier1 is obtained through processing clay. This is its GUI

You can see that the clay workbench has six different processing steps, and the products of different steps will be different.Through continuous click the step button to enter the range, the product will appear in the progress bar. If the clay workbench is attached to the container at this time, the product will be directly input into the container, and some processing steps will appear by -product.

The first two steps can be used directly. The next four steps require the corresponding tool coordination. The tools required are clay rolling pin, clay slice and clay scraper. The synthesis of the three tools refers to NEI.

Use this tool to unlock the third step

Using this tool can unlock the fourth, sixth steps

Using this tool to unlock the fourth and 5th steps

There is also a clay wrench in the clay industry

The use of each tool is displayed in it. Here is a problem about setting the machine to set the machine as a pipeline. You can right -click with clay scraper.

If the input and output in the pipeline will be connected before the settings are set. The two adjacent surfaces must be set in the input, and the other settings are set to be connected. As shown in the figure, the left is input and the right is output.After being set to a pipe, you can still input and output the machine, but the surface of the two machines cannot be set again. If you want to set up, you can set the machine with a clay scraper to set the machine.

Clane synthetic board: It is the function of a workbench that can be used instead of the workbench. It can cache items like craftsmanship workstations. When close to the box, you will get a fast synthetic function similar to forestry workbench.

But use the original box, because it does not use other MOD boxes, including the boxes that comes with the clay industry

Just put on the original box (if it is a large box, only the small box with the synthetic board is displayed)

Two ordinary tools, but with some special effects (pictured), you can make better tools when Tier6.

Let me talk about the automatic input and automatic output of the machine before introducing the machine.

Each surface of the machine can be automatically input or output.As shown in the first one in the figure, this side does not accept input or output; the second allows input items; the third one allows input filling clay, and the charging clay is the source of the energy; the fourth allows allows the fourth allowanceOutput items.It can also be allowed to output and input, but try not to do it at the same time as 5 and 6, because even if the machine cannot handle this material, it will still be input, so it must be separated from the input and output, and the surface cannot be input at the same time.And charged clay.

Tier1:

This stage is the stage of real machines, and it also begins to enter the semi -automatic era.

The first machine that must be made first

With it, you can have less clay workbench (you cannot completely abandon the clay workbench, because you still need to be a clay lathe)

This is the 0ce left of its GUI is energy (there are many units of clay industry energy, all of which are different CE, UCE is the smallest energy unit, 1000UCE = 1MCE.)) Click 50UCE once, with material is talent.If you have linkage with other mods to create MOD plates such as IE, IC, T0 can be made.

The Tier in the figure is the required machine level, T is red stone carvings, 1T = 0.1s (need NEI)

Clane drove:

It is used to make clay pipes and other mods of MOD. The board needs T4 to make it.

Clane cutting machine: used to make large and small clay plates and short clay sticks, and can also be used to make some wires of ICs.

Clay lathe:

For some parts, clay ring, clay needle, etc., can also decompose clay needles into clay sticks.

Basic molding machine:

It is used to make clay circuit boards and prepare for the latter clay machine.

Clane disassembly:

Some clay parts can be recycled into clay sticks, and at the same time, it has the function of squeezing the metal molding machine in the IC.

Clane stone machine:

Putting a water and an magma in any two directions of the horizontal plane will start working. A set of stones in the internal cache, but even if two pairs are placed in the figure, the speed will not become faster., Can't place it up and down.

Tier2:

There are more things that machines can make at this stage. When making Tier2 machines, you can throw Tier1's machine. Tier2's machine supports manual production capacity and waterwheel energy supply.

Clane Waterwhels & dense claywood vehicle:

This is an early production capacity machine that can turn the semi -automatic machine into an automatic machine without manual order. Tier2,3 machine energy supply also depends on it. The machine only needs to stick it to it.This machine has two classes, and the actual gap is only reflected in production capacity. He has 3 parameters.

Progress: This is capacity, and the value is constantly changing. The more water around the surrounding flow, the faster the change, the more production capacity.

Durability: The meaning of durability gradually decreases from a thousand points. The durability of the two -class waterwheel is the same. The more water around, the faster the durability.When the durability is gone, dig it out and then put it back, and the durability will change back 1000 again.

Water: The number of flowing water cubes within the range of 3 × 3 × 3 around the waterwheel block.

This is 4 layers of water, the first layer is water, and the bottom three layers are flowing water. This is the maximum production capacity.

Dental clay grinding machine:

Used to grind and grind.The clay components can be grinded into clay powder, dense clay ore and high -density clay mines are processed through it to obtain industrial clay fragments and high -grade industrial clay fragments, respectively.It is linked to other mods. It can be used to grind mineral ingot into powder or grinding like other MOD grinders. Some raw ores are directly obtained by some raw ores, not mineral powder.This machine can also play a certain decomposition role, and the wool and carpets can be decomposed into lines.

Dental clay compressor:

The low -level clay is to the high -level, and 9 changes to 1, which is also used to turn clay fragments and clay powder into clay blocks. This thing can be made to the industrial clay required for Tier3 and the advanced industrial clay required for Tier4.Relying on low -level clay alone to obtain high -grade clay. This method is inefficient, so wave your little pick mining.

Dental clay decomposer:

Turn high -level clay into low -order clay and change 9.You can also obtain charged clay powder by decomposing industrial clay powder and high -grade industrial clay powder. This is the only machine that can produce charged clay powder before the centrifuge.

Tier3: The machine is used for the machine with water vehicles ~

Charged clay compressor mk 1:

Machines dedicated to compress the manufacture of charging clay, compared with ordinary compressors, compressed the energy required for compressed energy clay.Tier3 can be compressed to dual compression energy clay, Tier4 can be reduced to the maximum (hexagonal compression energy clay); ordinary compressor Tier4 can compress the charging clay, can be compressed to dual, Tier5 can be compressed to the hexagon.And the ordinary compressor of Tier4 only has more to compress the clay. Other synthesis also requires higher -level machines, so it is not recommended to build a Tier4 ordinary compressor.

Simple centrifugal machine:

The second method of obtaining the charging clay powder, the output is higher than that of the dispenser. It is obtained through centrifugal industrial clay powder and high -grade industrial clay powder. In addition, it can also be centrifuged.

Simple electronic recorder:

The circuit of the clay industry is manufactured by this machine, making circuit manufacturing circuits by consuming clay powder and circuit board.The advanced circuit of the clay industry is equal to ordinary circuit boards in IC. The precision circuit is equal to the high -level circuit board. The circuit of the clay industry can be used for IC, but the circuit board of IC cannot be used for the clay industry, pit ~ ~

Open its GUI, you will see two input slots of different colors. Use a clay rolling pin to set which face in which slot is set in the outside of the machine. For example, when you set orange on the outsideIf you are full, you wo n’t enter the purple slot. Setting white is that both can be input to facilitate automation.

Basic molding machine:

Used to make different circuit boards.

Simple assembly desk:

This machine simplifies the manufacturing of machines and parts, making the same thing with fewer materials.

Tier4: Tier4 and the machines at this stage and subsequent stages are operating by eating energy.

Basic salt extraction machine:

Used to make salt, and then pour water on the six noodles, it will start operation. The faster the water produced, the faster the salt produce. This speed has the upper limit.EssenceThis salt can be commonly used with other mods, but the clay industry can only use its own and GT salt.tier4的盐分提取器内部缓存2组，tier5缓存6组，tier6缓存12组，tier7缓存20组，等级越高，产速越快（tier7产盐速度是真快，最快速产盐时，即使是Outputting outward, it is still full!Want to make powder quartz, clay grinding machine to Tier5.In addition, this MOD quartz powder is only commonly used in IE and GT quartz powder, and it is not available to other MOD quartz powder.Basic smelting factory:

It is a melting furnace of a roasted mineral powder for eating clay. It can only burn some mineral powder, and cannot burn the impure ore powder. Pure ore powder can only be made when Tier6, and the lowest level requires Tier5.What is useful, it may be that some mods are not added.This machine can directly burn the uranium-238 in IC2 into uranium ingots. The uranium ingot and the moda of the MOD and the expansion of IC2 expand the uranium ingots and ingots in the high-grade solar energy.

Basic chemical reactor:

This machine is the only way to obtain calcium chloride and sodium carbonate in clay industry, which is made with calcium clay powder and two salt.In this machine, use sodium carbonate and clay powder to make quartz powder, and then use quartz powder and coal or charcoal to make impure silicon ingots. Poor silicon ingot is the main material when Tier5.

Basic buffer:

This thing that looks like a simple mechanical shell is actually a channel for transmitting items. The higher the level, the larger the cache, and the faster the transmission speed.

Basic multi -track buffer

Compared with ordinary buffer, you can specify which surface can be transmitted to a certain item, and the input and output are set with clay rolling pin and clay slicer. The color is input or output all items.Each color surface works independently, and each color will have a filter slot, which can specify a certain item.The higher the level, the more color groups that can be set (up to 6), and the more items can be cached in each color group.

Tier5:

Quartz

Pure impure silicon into silicon.

At a time, you can purify 8 impure silicon at a time. If you throw it directly into the impure silicon, it will become like this. After a few minutes, you will get pure silicon.The specific time is the number of 30s x uns. Silicon. No matter how many, it is necessary to have a line in the end.There is no prompt when it is purified. You can throw impure silicon and line together. Anyway, it will automatically absorb the line after purifying, and then give you pure silicon.

Solar clay manufacturing plant

From left to right are Tier5 solar clay manufacturers mk i, Tier6's solar clay manufacturing plant MK II, Tier7's lithium solar clay manufacturing plant, can high -efficiency production energy clay, put in advanced industrial clay, MK i can be placed, mk i IThe maximum can be made to the charging clay, and the MK II can make up to the dual compression capacity of clay.Triple compression can be made to make quadruples, the lithium of this MOD is universal in IC2).At the same time, the low -level clay can be raised to high -level, and the lowest starts from dense clay.There is a question here. The higher the level of solar clay manufacturing plants, the slower the work speed. When upgrading clay and making low -weight energy clay, try not to use high levels!Also, these three machines can also work at night, the speed is the same, but remember that there is no block from the top of the machine.

Full automatic clay compressor:

Provide clay to automatically compress, 9 changes, no energy.

There is a marker bar in the upper right corner. The clay formulated in the marking bar can be used to limit what its maximum compression is, and the working speed is 1T.

Automatic synthetic table:

If you are composed of motion, you do n’t need energy, you can work if you provide items.

On the left is a synthetic table, the middle is the storage material, and the material location will automatically become the position of the synthetic table marked on the left. If there is this synthesis, it will directly synthesize.

Tier6: Start making multi -block structure

When Tier6, you can make these two more convenient tools. The clay IO configuration combined with the function of clay rolling pin and clay slicer.Essence

container:

There are two types of containers, the vacuum container (left) is used to destroy items, which is a trash can, a storage container (middle), which is used to store one item.Increase the capacity.Both containers have a marking bar. After the vacuum labeling, it will only destroy the type of item of the mark, and the storage will only store the type of item.The container will also have a texture of this item after marking the item.

Block crusher:

This machine will destroy the block of his latter and absorb into the machine. It cannot destroy the hardness of the hardness level in obsidian and above. Without energy supply, it can be used directly to use laser acceleration.When you open it, you can see that there are 4 keys on the left, which are start, stop, and re -set (that is, continue to work). The scope is displayed (from left to right, from top to bottom).The place it can destroy will become blue, and if you click again, you will see this area.In the middle is the cache area, and on the right is a filter item setting bar.

Chemical metal separator:

The chance of getting impure metal powder by processing industrial clay powder (can only handle this).

Electrolytic reactor

Transform impure metal powder into pure metal powder.

Alloy smelter

Make alloys.(This MOD (metal and alloy) and endless greedy expansion of universal spots are linked)

3 × 3 block loading:

Keeping the block is loaded and centered on the block where this block is located, the 3 × 3 blocks around are kept loading.

Clay blast furnace:

The first multi -block structure machine can be used to make clay steel machines, or it can also be used to make other MOD steel ingots, alloy ingots and some special ingredients.

As for how to make it, the machine of each multi -block structure will bring its own method.Become a green cross.When the machine and the outside world are input and output, they can only pass the interface and clay blast furnace (no one can input and output directly on the clay blast furnace), and the redstone interface has two more functions than ordinary interfaces: redstone control and display, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, red stone, redstone, red stone, red stone, redstone.It is to control the switch, stop working when there is a redstone signal; the display is the name and coordinates that can display the current multi -party structure (the order is x, y, z)., Convenient to quickly find the machine where the machine is (required your quasi -star to align the redstone interface).If you want to upgrade the clay blast furnace, you need to replace the more advanced shell.

However, there is another fun place at the time of upgrade, as shown in the figure, replacing 6 Tier11 high -pure anti -material mechanical shells. At this time, the level of the blast furnace can be processed by Tier7, which is raised one level.

When Tier6, you can make some things that enhance yourself, that is, various clay accessories.However, first of all, you need to make a clay accessory package, and put the clay accessories in it to produce the effect. Use the AZ91D alloy board (isn't it a magnesium alloy) and the leather in the clay assembly table.

These are all accessories that can be used (please ignore the last two). The first four are accelerated placing and accelerated mining. The latter three are flying.The next two are to eat automatically (the left side is saved, and the right is ordinary. The ordinary thing is that as long as the hunger value is half, no matter how much the food you bring, it will automatically eat it for you to eat it automatically.This is very wasteful, and what is saved is how many hunger value of this food can be eaten when you lose so many hunger value. When you eat it, eat in the shortcut column first, and then eat it in the bag.From left to right, from top to bottom, only the food of this grid can eat the next grid. If this food is full, hee hee, hee hee, wait for the hunger value to consume it automatically before eating it ~)The last three are to increase the distance and attack distance of your items.The accessories of the accessories cannot be superimposed.

Weapons that can be made after Tier6 can be made in a total of 5 kinds of guns. The first 4 types of Tier6 can be made, and the last one can be made for Tier11.The first is clay gun, the quasi -star special difference, 4 points of damage; the second is the high -end clay gun, the quasi -star is better, and the 7 -point damage; the third is the clay sniper rifle.It will be scaled to help aim, 25 points of damage; the fourth is to strengthen the clay sniper rifle, but only increase the damage of clay sniper rifle, 46 points of damage; the last one is the teleportation gun, as the name suggests, can be transmitted, the bullet is shot, and the transmission is transmitted to the transmission to the transmission.Where, 100 points of damage (the knife must be brought when used, and the sniper will not be melee is not a good sniper ~)

When making clay steel at Tier6, you can make two better tools.

Both of these tools have 3 modes: Mode 0: This mode is an ordinary tool; Mode 1: Digging the area of ​​3*3; Mode 2: Digging 5*5 customized areas, you can customize the diggingThe shape is also the characteristics of these two tools. Put the shape you want to dig with clay blocks. Right -click the center of the tool. The word Customized appears to prove that the setting is successful. Digging again is the shape you set.Strikes will also place clay (premise that you need to be in your backpack).Take the tool and right -click the tool to adjust the mode.The Mode1 mode and Mode2 mode of clay steel pick can be indirectly dug off!But the speed is slow.

Activator (which means catalyst in English)

Right -click on the automatic stand -alone, similar to the automatic executioner of TE, without energy supply, you can use it directly, and you can use laser acceleration.

Its GUI has a row on the right than a block crusher, which is the target of 1 right -click. 2 Place or right -click on the target. Right or Shift right -click when 3 standing.The left button of these 3 keys can switch mode.1: On the left is the right button of the opponent, right -clicking the creature in the middle, and the right side of the opponent and the creature can right -click.

2: Right -click on the left side, and the right side is placed.

3: Right -click on the left and shift right button on the right.

Tier7: Laser!

Clane: Clane laser is divided into four levels of blue (Tier7), green (Tier8), red (Tier9), white (Tier10), white laser equals 3 blue laser+3 red laser++3 red laser+3 green laser.The higher the level, the more energy consumed, and the stronger the output laser. One characteristic of clay laser is to increase the output by superimposed.The laser will be discolored together, and the three colors will become white.The laser can be controlled by the redstone signal, with signal stop and no signal work.The laser reflector can change the laser direction and right -click with the clay pipe configuration (or clay scraper and clay wrench) to adjust its direction.The laser can only gather ten at the same time, and the energy of more than ten laser will not be improved!A laser maximum is 32 (in fact, only 31, and only half the grid in the end, this half is useless). The laser reflector can extend the distance, and the laser can pass through the transparent block.There are many uses of laser: 1 Destroy a part of the block; 2 directly turns the original ore into a mineral block (9 times the production); 3 Change the type of sapling (can only be turned into the original tree seedlings); 4Make regional machines accelerate; 5 The most important point of the laser can turn the original sapling into clay saplings (when the energy reaches 1,000, the specific laser energy value can be introduced into the clay reactor to view it by itself).

The clay seedlings can grow into clay trees, and its clay trees can centrifugs high -grade industrial clay powder, manganese powder, lithium powder, and pink powder. It can also be grinded into organic clay powder. Organic clay powder can be made into carrion, soil and nitrate.The primitive trees can also be made into bamboo in bamboo Mod in the clay reactor (the material pits you want, and there are more energy consumption. It is better to go to plant bamboo shoots by yourself).The clay leaves will not drop the sapling.

Clane reactor:

The main use is to create active clay and industrial clay powder. Industrial clay powder can be burned into industrial clay ingots in Tier7's clay blast furnaces. It is one of the main materials of Tier8.Machinery manufacturing, Xindu ingot only requires silver and copper with this machine, and does not require unstable melting red stone.Note that the laser interface on the third layer faces the black circle, and the laser is entered into the machine from this side.

Material converter:

You can convert metal ingot, saplings, logs, and even skulls. Of course, there are restrictions on the transformation that only allows the transformation of similar items. The specific conversion formula is NEI.Tier12's material converter can convert 64 lower stars into 1 dragon egg!

Regional project mining machine:

This is an item collector. The regional planning is planned through the scope of clay landmark planning, and all the dropped items in the regional area will be collected.The method of using landmarks is similar to BC. The landmark is planned to plan a rough range. Then right -click the landmark of the center, and a blue semi -transparent cube display range will come out, and then the excavator will be placed on the ground.After you click the range display of the excavator, you will display the scope you just planned.

If you want to set it on the height, you can put it like in the figure, and then right -click the landmark in the lower left corner in the figure.

When the landmark plan is scope, only one nearest landmark will be selected to plan the range. The maximum distance between the two landmarks is 64 square meters (if the range of each plan is regarded as a cuboid, then each landmark is a cuboid.The apex, so it is impossible to use 3 landmarks to make the length of the bonus more than 64).

Tier8

Regional trigger

The higher -level machine than Activator can right -click in the area and creatures in the area. The keys are the same as Activator without energy.

Regional excavator:

It is equivalent to BC's quarry, which requires energy and can speed up working speed through laser.

Regional mining machines with clay open -air mining landmarks are better. The use of clay open -air mining landmarks is the same as ordinary clay landmarks, but when it is more functional, when planning the scope of clay open -air mining landmarks, the planned range is directly to the ground 1 floor 1 floor.of.

Clay manufacturing:

Can copy clay, put a clay in it, it will start working. There are three levels. The higher the level, the faster the work speed.

Automatic Trade Station:

Similar to RC's trade stations, the difference is that that is a scope read the villagers' transactions, and the transaction of the villagers standing only on it requires energy supply.Note: Use things to surround the villagers, so that the villagers are obediently standing and prevent the villagers from running.

Tier9: Anti -material

Advanced regional mining machine:

The high -end version of the regional mining machine is only three of the filter item marker bar, and all three need to be matched with the filter item.

Harvest: It's a whitelist.Shipping: Use filter items to be collected at the specified time.

Precision collection: Use the filter item to specify the target of accurate collection.

CA polymer:

Through this machine, the anti -substance seeds are turned into anti -substances, and anti -substance seeds are made of industrial clay ingots through industrial clay ingots in the Tier 9 clay reactor.

CA injection room:

Can get high -end machines by injecting anti -substances into low -order machines, or can also use anti -substances to convert some metals of GT.

Tier10:

CA reactor: turns anti -substances into high -purity and anti -substances.

The multi -square structure needs to use the CA reactor core, the CA reactor shell, the CA reactor coil, and the clay interface.

The precautions are as shown in the figure (lazy). When the reactor shell is placed: Rank1 and 2 reactor shells require MK i or higher coils and cores, Rank3-6 requires MK II, RANK7-10 requires MK III.

The coils are also required (the ng above should be NO), the C refers to the coil in the figure, the ____ is an empty place, which means that the number of coils in 8 square blocks around a coil must be 2.

Don't look at it when it is shining at work, it does not provide brightness.

CA resonant collector

Similar to the endless greedy neutropine collector, it generates anti -substances out of thin air, and the working speed is particularly slow.

Resonance warehouse

Accelerate the generating speed of the CA resonance collector. The CA resonance collector can identify the resonant warehouse in the range of this square as the center of 5 × 5 × 5.

Overclocking upgrade:

This overclocking upgrade is not placed in the machine in the form of a plug -in. You need to put the machine with the machine to speed up the work. It can also be used for multi -square structure.The shell, the machine that is posted by it will get a parameter in the GUI: overclocking to display how much speed is increased.Like other MOD overclocking, the faster the speed, the more energy consumption.

Regional reset

By replacing the blocks of the selected area by the provided block, if there is no block in the selected area, the square will be placed to fill the empty place, and it will have time transportation and accurate effects.