Reminder: The production line of this tutorial requires aluminum to make some coverage and machines (the method of obtaining aluminum at the end of the tutorial)

1. Construction of the immersion (as shown below)

Set the left bucket to 9 accurate input (right -click once, right -click the screw knife 9 times)

The storage tank above is a sulfuric acid input port (in fact, rubbing a sulfate line)

The box on the right is the product output port

2. Treatment of fluid products

Observation recipes can be found that the fluid products processed at each time are (sulfate*metal*)+hydrogen

You can use fluid filtering version to use hydrogen or directly with release pressure safety valve to release

Place the fluid coverage version in front of the front, set it as a blacklist (right -click screw knife), filter hydrogen

From the blacklist covering version, a pipeline is introduced to access the fluid product (must be a pipeline of corrosion!), Placed the generator and electrolytic machine (can be HV, but LV does not work), put in the electrolytic machineEnter water from the top (ductive version+infinite water)

Pay attention to the front of the electrolytic machine here

Place the fluid filtration cover (white list) on the front of the electrolytic, select the filtering fluid (such as aluminum sulfate, magnesium sulfate) (right -click with a test tube with a fluid to choose)

Put the drawer at the output port (square output port) of the electrolytic machine, and the fluid output port (circular output port) is connected to the four -link body pipeline

Place the fluid filtering covering version to filter sulfuric acid and oxygen, respectively, sulfuric acid and oxygen can be recycled (or in the trash can)

In this way, the production line is done. If you want to increase the type of fluid product treatment, you can copy the part

over

Evil Dao aluminum gameplay:

Alumina powder can be directly smelted into aluminum in the artisan soul smelting furnace.