This tutorial is set by the author to use the CC by-NC protocol.

1. The distribution of the machine

The main machines of environmental technology in 1.12.x and below are as follows:

Machine name Machine type Energy Special Energy Requirement Space Requirements Requirements The main product of the main product of solar generator production capacity above 15*2*15rf Energy Moonlight Generator (Moonlight Technology Affiliated) production capacity output Unobstructed maximum 15*2*15rf Energy -resistant needle capacity capacity capacity capacity capacityThe output is 3*23*3rf Energy Void Resource The Energy Energy Consumption Consumption must be the void or base rock maximum 13*8*13 stones, sand and other basic supplies. Void plant excavator consumes the bottom of the void or base rock.The maximum 13*8*13 various types of mineral rough, crystal void mineral mining machine consumption consumption must be the maximum of various plants, crop seed nano -robotic benchmark energy consumption energy consumption, which must be consumed by the maximum of 13*8*13*8*13 Around a certain range of BUFF Personal Consumption Energy Consumption Consumption Consumption, the maximum unobstructed maximum 13*8*13 Follow the personal buff

It can be seen from the table above that solar generators, moonlight generators, individual/nanometer requirements are not covered above, it is best to be established at the highest point of the block, that is, 255 grids.Use F3+G to mix out the block display, and then each block

Only one machine can ensure that the space is sufficient and the normal operation of all machines.Because the lightning rod is also a capacity of capacity, it is generally built adjacent to the solar generator and moonlight generator to build it.

Reduce waste of energy cable.Void resource/plant/mineral mining machine requires the laser core to be void or base rock, so it is placed at the lowest point of the block.The above machines can be placed in a block.

2. Energy input and output

After the machine construction is completed, the energy input and output is faced, and the following schemes are recommended.

Plusal scheme: Directly use the through -volume network for energy input and output. This module supports extremely practical features such as wireless, unlimited, exaggerated, and wireless charging. It only needs to access the energy inputter on the capacity machine.Plant/mineral mining machines/individuals/nano -beaches and other energy -consuming machines can access the energy outputer to realize energy Unicom.

Cable solutions: MEK, thermal, Enderio and other modules have their own energy transmission pipelines. If there is no traffic network, then use cable links are acceptable solutions. This solution needs to consume a large number of cables, and the above modulus needs to be consumed.Most of the group cables have transmission energy restrictions.

Compact scheme: Close production capacity and energy -consuming machines, and directly enter the energy consumption machine.This scheme needs to clear all the blocking squares above and below, which can be used on the empty island map.

3. Receive, conversion, classification of items

The types of items produced by void resources/plant/mineral mining machine are very complicated, and many do not have value, and need to be treated preliminaryly.The first is to use a larger box (dragon box, alchemy box, diamond box, large board box, etc.) to place it around or above the void resource/plant/mineral mining controller.Delivery when a box.At this time, if there is already a very complete AE storage network,

And the storage space is sufficient, you can directly connect all products to the AE network through the input bus.This is simple, but it will allow many useless items to occupy AE storage space.Therefore, there is the following screening process.

The first choice is to put density conversion gemstone/conversion ring in the alchemy box, set up which products are kept, and why transformation.In this way, all items with EMC value will be converted into specific products, and then connect the retained items to the AE network by entering the bus.For too many types of reserved products or deleted EMC values, the product can be imported into the last shadow box (last shadow storage module), and then connects to the AE network by input the bus from another color last shadow box.