This tutorial is set by the author to use the CC By-NC-SA protocol.

How to automate the two automation methods and repeated items about the furnace of prison fire furnace

The first pure AE automation solution

合成流程：ae发配材料至钻石箱子，接口请一定一定一定要开阻挡模式，否则ae一次性发配完所有配方会有几率导致合成卡核，之后输入总线会抽取材料至狱火熔炉，因为狱火The melting furnace itself is a container. Putting a storage bus above the prison furnace will turn the prison furnace into a container in the AE network

You can use one -click formula like jei, but please remember the order of the materials used. This is very important

Please set the items of the sender to the last material of the use of the material in the last material of AE. As shown in the figure above, the last one I use is the polymerization matrix, so that when the AE distribution material is also distributed by the model, the input bus will be according to the bus will be according to the bus.The order of the soul stones and then pumping the polymerization matrix. After the polymerization matrix is ​​pumped to the prison furnace, the sender will detect the polymer matrix in the AE network to send a signal to activate the reverse trigger bus located above to cut the input bus.

After waiting for the completion of the perception ingots, the item catheter will be pumped away by the item (please be sure to use the filter to mark the finished white list. The four synthetic ports of the prison furnace can also be drawn away, so the white list is required).Then the polymer matrix in the AE network was consumed, the sender went out, and the bus was turned off in reverse. The next set of materials were then pumped into such a cycle, and the entire synthetic process was like this.

The second EIO limit item filter automation

Set up the pipe above the prison furnace to line No. 1, and the tube on the left of the furnace of the prison furnace is line No. 2

Use the filter as the

Put the restricted item filter in the existence of line 1 and set it to this

Limit the items filter will constantly detect the items of the container connected to the container. If it is set to the above figure, the restrictions of the filter will constantly turn the stored items into the setting to complete the synthesis. The interface must also open the blocking mode.It does not work, but the restricted item filter will retrieve all the items of the diamond box at one time and find out other materials that are missing. Although it will not be a core, it will greatly slow down the progress.Bar, please use the same filter that is the same as method 1 when you draw the finished product.

If there is a synthetic formula similar to this picture

The formula contains reusable materials, which will cause synthetic card cores due to repeated stacking. We can use AE's self -printed pressure and name pressure template to rename one of them

如图再使用这个金锭以及未改名的金锭来达成无法堆叠的重复材料的合成，至于名称压印模板如何改名，只需手持石英切割刀右键空气，放入铁锭并更改名字即可获得Essence

Note: If the will of the will, the 4 demon will crystals, and you can also use 3 different names to make a printed press to rename it.

Reprinted, please indicate the original source