This tutorial is set by the author's setting without permission.

A CC: VS measurement SHIP parameter and portrait it into the CC program on the display.

This instrument panel controls the location and size of each instrument on the screen in a very intuitive way so that any player can use this instrument panel without obstacles.

This is the second edition, and it may continue to be updated in the future.

Directly running: Pastebin Run BZZZCTAA

Installation method: Pastebin get BZZZCTAA Instrumentpanel.lua

After installation, please enter: Instrumentpanel.lua

Just run.

Note: This program can only be used normally on the Ship assembled by the rudder when facing the south, otherwise the attitude instrument and the turning side slide instrument will make an error.

It is necessary to run the LUA program, and the advanced computer has at least one display peripheral.

The display peripherals are not required, and any shape is fine, but it is recommended not to exceed the size of 5x5, otherwise the screen refresh rate will be very low and the experience is not good.

Screen flash is related to the number of gaming frame rates and the number of instruments. The lower the frame rate, the more the screen flashs the more severe; the less the number of instruments, the more severe the screen flashes (subsequent repair).

For the first time

After the first operation is successful, the computer will display such an image:

Its display peripherals will be displayed:

It means that the instrument panel program has been successfully installed.

Use

When we return to the computer, there are six buttons in the lower row, which are:

"SM": speed table

"AM": Gesture (only measuring pitch)

"TC": Turn on the side slipper

"AI": height table

"TI": Lift speed table

Display and hidden instrument

When we click on the red font button, its font will turn green and show the relevant instrument.

EG: When I click the previous green "SM" and click the red "AM", "SM" becomes red, "AM" becomes green. At the same time, the speed table is hidden and the attitude is displayed.

Final image:

The position of the instrument moves

Regarding the movement of the instrument, this program uses an intuitive drag method.

You only need to click on the instrument you want to move, and you can select the instrument (when selecting the instrument, the related buttons will become golden, indicating that the instrument has been selected), and drag the instrument long, put it to you to youI like the position (just like dragging the icon of the Window desktop)

EG: When I long press the left mouse button to select the instrument of the gesture, drag it to the upper left corner of the black frame.

Final image:

At this time, if we look at the screen, we will find that the attitude on the screen also moves to the same left upper corner, that is, the range of the black frame in the computer is the range display of the screen.

The radius of the instrument

Regarding the radius of the instrument, this program uses an intuitive mouse roll method.

When a meter is selected, the mouse roller rolling can change the vertical length of the instrument. Pressing the shift+mouse roller rolling can change the horizontal length of the instrument.

EG: When I chose the attitude instrument, roll up the wheel upwards, and then press Shift+down the rolling wheel. At this time, the attitude instrument becomes a narrow and long ellipse.

Final image:

The performance of the screen outside:

Settings of instrument parameters

For the maximum table with the maximum value of the speed table, height table, and lifting speed table, this instrument panel gives a custom maximum method.

In the computer, right -click the button of the instrument that has been displayed, and the button will become yellow.If the right -click is the three instruments mentioned above, it will also jump out of a gray frame, which shows the maximum value of the current settings.

EG: As in the picture above, when "SM" is yellow, I roll the mouse wheel, roll up upward to +1, and roll down to -1; shift+roll up upward to+10, shift+down roll down to -10, and under MaxSpeed ​​under the maxspeed under the maxSpeedThe value changes.

Final image:

The performance of the outside screen:

We can see that the maximum value in the red interval has changed to 100 (100 is not displayed, because the above is 100*5/6)

The other two tables are also operated, so I will not demonstrate them one by one (the video will be launched at station B in the future. If you are interested, you can watch it)

Save data

Needless to say, click "Save" in the upper right corner, that is, the data of all instruments will be automatically saved to enable your custom instrument configuration in the next instrument panel.

The ability of each instrument

Speed ​​table

In -computer performance

3X3 screen performance:

The red area is the maximum value, and the user can set the maximum initial speed. If the speed of the ship has exceeded the maximum speed, it will refresh the maximum value.

(The speed measuring table is distorted in the upper right corner (in fact, it is caused by forcibly set the screen text ratio (QWQ), as long as you run it again.instrument]

Performance in the computer:

3X3 screen performance:

When the SHIP pitch angle changes, the table changes, and the small plane will rotate a certain angle according to the pitch angle of the ship.

When the pitch angle is greater than or equal to 0, it is manifested as a green pointer; when the pitch angle is less than 0, it is manifested as a red pointer.

Turning side slipper

Performance in the computer:

3X3 screen performance:

The table changes when the ship side changes.The small aircraft will rotate a certain angle according to the side of the SHIP.

Naviger

Performance in the computer:

3X3 screen performance:

The table changes when the ship is changing.The upper position will rotate a certain angle according to the orientation of the Ship.

The direction of the green arrow is the direction of Ship at this time.

altimeter

Performance in the computer:

3X3 screen performance:

The table changes when the Y -axis coordinate of the world is located in the center of Ship.

Users can set the maximum value of the initial height, and the value on the screen is displayed as the maximum value/10 (the same, and the height minimum value is also set, the same value is the opposite number).Poor for a moment.

When the height is less than 0, the pointer of the table is red; when the height is greater than or equal to 0, the pointer is white.

Lift speed table

Performance in the computer:

3X3 screen performance:

The table changes when the SHIP's Y axis speed changes.

Users can set the initial height maximum value.(This table can be said to be the least gold content)

When the direction of the lifting speed is down, the pointer of the table is green; when the direction of the lifting speed is upward, the pointer of the table is yellow -green.

Reference case

3x2 screen:

computer:

Screen:

1x3 screen

computer:

Screen:

3X3 screen

computer:

Screen: