This tutorial is set by the author's setting without permission.

The follow -up pigeon of the basic tutorial was almost a year, and he/she had indeed abandoned it.

The high -level ring should be expanded on the basis of the basic ring. First, the next -level magnetic ring is connected. The docking part should be placed on the low -order ring as shown in the figure as shown in the figure. The accelerator control point should be placed and the frequency is set.The size of the ring is not too limited.The embarrassing situation of the next level of the magnetic ring, such as doing it when you do tutorials)

The side -cutting is like this

Low -level ring

The high -level ring is the same. In addition, it should be noted that the connection must be conforming to the direction of the particle injection machine. For example, the position of the particle injection machine allows the particles to exercise clockwise, and it cannot be extended according to the trajectory of the counterclockwiseAfter the orbits in the connection, the orbits will continue to rotate in the next level along the current direction

Then move the particle collision machine to the high -end ring, as shown in the figure ignore the ruins behind

Finally, place the corresponding cooler according to the level of the ring.

Excellent ring, the final finished product is shown in the figure as shown in the figure

Are you curious why lack a big piece?Because the pictures can't go up too much

The particles will turn faster and faster and change color, but the power of explosion after flying out is the same.

Excellent ring can produce anti -substances.

If you have any mistakes, please correct correction