Foreword: This tutorial uses a integrated package nomifactory!

In HV, you can start considering the good thing of oil. Petroleum is a very useful resource in the middle and late stages.

The distillation tower can help us use oil comprehensively (here is a dual HV energy warehouse, so that you can increase to EV)

There are a total of four types of distillation tower, namely: sulfur -containing fuel, sulfur -containing fuel, sulfur -containing oil, and sulfur -containing refining gas.

What this tutorial is to talk about: How to use light fuel (light fuel) to create epoxyrobirium propionane

Please check here

First of the flowchart

First of all, a fluid heater is needed to produce water steam

Then crack light fuel in the chemical reactor, and make steam cracking light fuel

Create steam cracking light fuel to propane (be careful not to use the wrong program circuit, in Nomifactory, the No. 7 circuit)

Plaxyl chlorine is generated in chlorine reactions

Then mix it in the hydrochloride, sodium hydroxide

This is the main production line.

However, the demand for chlorine and sodium hydroxide is very large, so it is necessary to need an by -production line of sodium hydroxide and chlorine in addition to the main production line. I use the method of electrolytic saline (using AE to store and centralized distribution)This can also produce chlorine gas and sodium hydroxide at the same time.

Overall full picture

Written later: When producing 1000MB of hydrochloric acid, it will produce 1000MB of hydrochloric acid. It is not recommended to electrolytic hydrochloride!It is not recommended to electrolytic hydrochloride!It is not recommended to electrolytic hydrochloride!(Important things say three times) can be imported from the production line of bisphenol A, which can just consume it without surplus.

The role of epoxyroper is a very important epoxy resin in the middle and late stages of production, so this production line can be said to be done.