Curvature drive tutorial mirror image image reaction chapter [WD] curdrive driver

The mirror reactor is a large production capacity of the curvature driver.Basically, four or five IC nuclear power can be burst.

Pay attention to the content before the text starts:

1. When jumping or entering and exiting the planet in your spacecraft, and entering and exiting the super space, please turn off the mirror reactor, otherwise, please be at your own risk for any consequences caused by block problems.

2. The mirror reactor is easy to cause collapse, please treat it carefully.

So, let's first look at how the mirror reactor is described on the wiki

"The Enantiomorphic Reactor is a Multiblock Structure Capable of Generation A Lot of Power Through Anrtia Driven Relation" "

The mirror reactor is a multi -block structure that generates energy through unstable inertia drivers.

In fact, it can be regarded as a permanent motivation, because as long as the mirror reactor is started, the output energy can be used for free.(Using RF as a unit, you can directly output EU and RF)

Build

If you do not want to use 12 strengthening pyramids as a radioactiveotin temperature difference generator at a speed of 5RF, then you better prepare:

One mirror reactor heart core, four mirror reactor stable laser, at least four laser media, a computer and enough cables can connect them.And, power supply.

Step 1: Put the core in the center and open a block in all sides to put four stable laser

Step 2: Use CC or OC to connect it. You can only do this step from the top or bottom. The third step: at least one laser medium on each stable laser

Step 4: Electrone the laser media and connect the core to a battery, or you can simply connect the core to the laser medium directly (I used a grid of excellent sub -space capacitance and four MFSUs).Go to the computer and start the reactor

 The Enantiomorphic Reactor Core Holds An Alien Artifact Holding Energy Production: As More Energy Gets Accumultation, Ore Energy is Produced in it. As Long as Energy Is Stored in the Artifact, more instabilityIs Also Accumulated. Interestingly, an unstable artifact Will Also Produces DRASTICALLY More Power. Needless to say, AT 0% Stability, Design Team d a seth-default system to prevent full blown explosion that will be your white ship in the next few features.

ThankFully Our Scientist Have Been Able to Design a 'Core' to Keep This Artif While It's Not Use, Hopefully, it wON'T BLOW Up On You it's off or simply dismous.

In their Grand Wisdom, They Also Crafted A Special 'Enantiomorphic Reactor Laser' System to Help Stabilize the Artifolact. TICALLY in the Core, you'll only need 4 Horizontal Lasers to Stabilize it. a more powerful beam willProvide More Stability on that site of the Artifact Over A Bit of Time. s the core tries to compensate for it. Hence you'll have to carefully adjust your laser shot levels accountinglyIf you look at it, you don’t like it. You can jump directly to see my translation and explanation

The reactor has a characteristic: with the accumulation of energy, production capacity will continue to improve.But as long as the energy is stored in the pile core, the stability will begin to decrease.But the degree of instability also improves production capacity.At a degree of stability of 0%, the core will be destroyed by themselves.It will remain stable when the reactor is closed.Because the core "The Bipolar Construction is Placement Vertically" deoxyuraogenic acid dual -spiral structure, you only need four stable laser to stabilize it.A powerful laser will improve stability within a period of time, and too frequent laser will cause efficiency and eventually produce a miniature explosion, so you must carefully adjust the laser level.

Then, the capacity of the reactor is linked to the energy and storage energy and instability, and it is necessary to continuously change the intensity of the laser when it is stable.Call CC big guy, write a automatic program!

Okay, so simple production capacity tutorial is like this

(I deal with it according to 25%stability and 1000 laser)

The output mode is set to hold, until the about 6000rf/s

Set as Rott AT 5000rf and continue to wait for growth.

Eliminate the capacity of more than 7000rf, set to 7000RF

4. Then continue to follow up and adjust, the capacity will continue to accelerate due to energy accumulation. After that, you do it is to make a steady -earned transaction.

5. Remember to pay attention to the storage energy. Its launch is 100 million, which is about 6000 0000 ~ 7000 0000.

(This stuff is definitely worthy of its cost)

above

Attachment: The explosion of continuous laser

The explosion when the stability is 0%