How to be a qualified driver [IV] immersive venes, Minecraft Game

Myriagame 32

Release time：2024-12-09 18:28:43

This tutorial is set by the author to use the CC by-NC protocol.

sequence

Seeing the MFS (MINECRAFT FLIGHT SIMULATOR) tutorial written by@看到看到, my successful crash and countless old pilots who had successfully crashed many times also wanted to write a tutorial.

At the same time, it is because this is a module after a large change. There are many significant differences in MTS and MFS. It should be distinguished, so open a new pit.

Module

MTS is a module that allows you to catch a car in MC. The original intention of guessing the production of the module is to bring some transportation systems in the real world into the MC, and at the same time introduce some physical elements in reality to increase the original version to increase the original versionFun module.

At the same time, more deaths/human disasters are added to MC

Notice before installation

0. I and the module author will not bear any consequences of damage caused by the module

1. This module requires certain aviation knowledge to play normally

Module installation

1. MTS needs forge, please install forge first and then install MTS

2. Please go to the CourseForge page of the MTS (now renamed ImmerSivevehicles) for the module download module body

3. Pay attention to this composition needs to be eaten with the content package together

You can find the download address of the content package in the same page as the module body

(Shortcut) visit the CourseForge page of MTSOFFICIAL SET to download the officially made content package (only the module body and the official content package of this tutorial)

3. Add the module body and content package to .minecraft/MODS (note that the content package version and the module body version must be consistent with the MINECRAFT version you want to use)

4. Try to start the game (please ask the forum and attach screenshots)

Attachment: It is recommended to use automatic Chinese update to eat. This tutorial will use the content name of the automatic Chinese update

Some car tutorial

Get automobile parts

Open the drawing design desk, you can find the relevant information of all the body of the vehicle. Find the vehicle you want, and make sure that there are required materials in the backpack, and then press the button to point to the side of the arrow to get the shell of the corresponding vehicle. At the same timePlease pay attention to the vehicle parameters on the left, which will determine what kind of engine/tires can the vehicle be installed. (The introduction on the right can also see it)

Open the engine manufacturing desk, you can find the relevant information of all the engines that can be manufactured. The production method is the same as the production shell.

Open the seat and box manufacturing table, you can find all the containers that can be made in the vehicle and the relevant information of the seat. The production method is the same as above.

Open the tire manufacturing platform, you can see the relevant information of the floating tube/ups and sideline/wheels. The production method is the same as above

Open the instrument manufacturing desk, you can see all the instrument information, the production method is the same as above

(Optional) Open the tool manufacturing desk, you can see some custom parts information, the production method is the same as above

Assembly car

Right -click the car body on a large enough field. At this time, the body will sink slightly in the ground. It is normal after installing all the tires

Press the right -clicking of the handheld tire to install at the corresponding position (there is a green box prompt at the installation position in the installation position. If it cannot be installed, it is red.

The installation of the engine is the same as the installation method of the above seat and the container.

Right -click the car to open the instrument installation interface at any part of the car, select the installation position first, and then select the instrument you want to install in the selected location. If there is a corresponding instrument in the backpack, it will be installed.

-Scout car uses an AMC engine, GMC semi -trailer and fire trucks use the Detroit engine

-Tire size will affect the maximum speed and climbing height of the car

-In a common meter combination is the power meter+speed meter+engine speed table+oil meter, which can be installed by yourself

-The engine speed list needs to be matched with the corresponding engine to use normally

-The instrument panel can be installed on the main instrument and control panel (only part of the aircraft), please pay attention to the installation location. The button of the current installation location will be displayed as dark

Instrument introduction

Oil gauge

Oil meter is a instrument used to indicate the amount of oil from the vehicle

-Li Kong (Empty)

Electric meter

The power scale is a meter used to indicate the remaining power of the vehicle

-The left side is low (LOW) power, and the right side is high (HIGH) power

Speed meter

The speed meter is a instrument used to indicate the current vehicle movement speed

-Mou: KPH (kilometer/hour)

A type of speed gauge

-In unit: MPH (miles/h) a type of speed table

-Mou: BLK/S (block/second)

Engine Motor

The engine speed list is a instrument used to indicate the current engine speed

-The applicable to Detroit diesel engine

-Mou: × 1000rpm (digital multiplied by 1000 rpm/minute)

A type of speed gauge

-I applicable to AMC i4

-In the same as above

Gear table

The gear table is the instrument used to indicate the current gear

-The number in the middle will change with the gear of the gear

-N is the vacant R is the reversing gear

The engine temperature table

The engine temperature table is a instrument used to indicate the current engine temperature

-Mou: Celsius

A type of engine temperature table

-Mou: Huali Du

Engine oil pressure gauge

The engine oil meter is a instrument used to indicate the current engine oil pressure

-Mou: Bar (Bar)

A type of engine oil gauge

-Mou: PSI (pound/square inch)

Dismantle

Handheld wrench sneak+left button can make the entire car drop into items, keep all configurations (if there is a container, the container content is also kept)

-This left button corresponding parts can remove the corresponding components (such as containers, container content is also retained)

Cheer up the car

Place the car near the fuel pump and enter the fuel pump in the fuel pump (the right -clicking of the pipe or the fuel barrel at the bottom, the fuel pump is stored 15 barrels), right -click the fuel pump, that is, refuel to the nearby vehicle.Frame output prompt

The fuel pump only cheers the vehicle when the types of fuel required by the fuel required by the fuel that are stored in the engine of the target vehicle.

-Apicking crude oil as an example (immersed crude oil requires front immersion project), the fuel type is avgas, and gasoline needs to be added, and DIESEL needs to add diesel

-I can get the corresponding engine in the creation mode

-In the original version, you can add magma as fuel to all vehicles

Key settings

After opening the game menu (you can press ESC after entering the world, or click the "Options" button of the main menu), select control, roll down and find "My World Transportation Simulation"Key, you can modify it by yourself

Press the corresponding button in the world to adjust the settings interface. Click the car (keyboard) under "Control" to open the setting of the car operation key position

The black frame next to the entry displays the keys used in the current entry. Press the black frame to clear the original key position settings, and display a flashing cursor at the same time. At this time, press the key you want to change to complete the settings. At this timeBlack frames will show the key name you just pressed (if you do not check whether the operation is correct and whether the keyboard is damaged)

Then use the corresponding key to operate the car, right?

-The method of directly resetting the default buttons is not found yet

Car

Right -click the seat (@: You let the box drive a car to try?)

Here we use "[xxx]" instead of the corresponding operation button

Press [Panel] to see the car's operating panel mouse and hold the left button to drag

To the right end (upper right corner) to ignite, it will be directed to the front when it is released. At this time

Press again [Panel] to exit the operating panel

Press [Raising the gear] to enter a gear from the air gear from the air gear and press the [throttle] to keep the car move forward [Dropd by the file] to return the previous gear.

-In this [throttle] will only increase the engine speed, and the forward or reversing will be determined by the gear

-Scout is an automatic gear. After entering the first gear, it will automatically enter the higher gear when the engine speed is sufficient when the engine speed is sufficient, and the engine speed will be returned to the lower level.Will return to the empty gear and reverse gear, you need to manually retreat

-It can install the gear table to display the current gear, or you can see the gear position judgment gear

-The operation that cannot be done in reality (hanging the car when you move forward) can not be done, please hang up the car after parking

-Cap battery can not start the car, and the car can not be activated without oil (except for creating engines)

Press [Left Turn] [right turn] on the road to turn the "坎" of different heights according to the tire size car. If it cannot be opened, it will stop.

Press [braking] to decelerate or until the parking [function key]+[brake] can pull the handbrake, then press [brake] to put down the handbrake

Common problem

What should I do if the battery is out of power?

-Plocked by right -clicking the vehicle with a battery with a cross -connecting cable (there will be a prompt at this time), and then right -click without electricity (the order is not affected and noticed at this time.The power distribution of electricity between the platform will automatically stop when the power is available to two -load. At this time, there will be a prompt in the chat bar). During the distribution of the power, the vehicle that provides power can be mobilized to make the two -load battery battery more (of course, you can also mobilize, do you not mobilize, do you not mobilize?The vehicle of the electricity).

I can't see some words, what should I do?

-This problem may be related to your current display resolution, low -resolution display may cause some words to be unclear (I have this situation, the display resolution is 1440x900, and higher resolution such as 1920x1080 should have no problem).) There should be no problem).)

Some car tutorials are over

Part of the aircraft tutorial

Foreword

As a highlight of this module, the aircraft is much more complicated than the car, and the difficulty of operation is greatly improved. Therefore, some aviation knowledge is required to play normally.

Some of the aircraft tutorials will use a simple checklist to illustrate the operations that need to be performed before and after the departure and before and after landing.

It is strongly recommended to open the super flat world to practice until you are proficient and then go to the personal survival world to play and play

Get aircraft component

Open the drawing design desk, you can find the relevant information of all the body of the vehicle. Find the aircraft you want, and make sure that there are required materials in the backpack, and then press the button to point to the side of the arrow to get the body of the corresponding aircraft.(You can also take a look at the introduction on the right)

Open the engine manufacturing desk, you can find the relevant information of all the engines that can be manufactured. The production method is the same as the production shell.

Open the seat and box manufacturing table, you can find all the containers that can be made in the vehicle and the relevant information of the seat. The production method is the same as above.

Open the tire manufacturing platform, you can see the relevant information of the floating tube/ups and sideline/wheels. The production method is the same as above

Open the instrument manufacturing desk, you can see all the instrument information, the production method is the same as above

Open the pushing device manufacturing table, you can see all the relevant information of the propeller, the production method is the same as above

-Pay attention to production parts according to need

Assembly aircraft

Right -click the aircraft fuselage on a large enough field. At this time, the body will sink slightly in the ground. It is normal after installing all the tires

The handheld tire is right -click to install at the corresponding position (the handheld component has a green box prompt at the installation location, if it cannot be installed, it is red. If you can't see the prompt, right -click).

The installation of the engine is the same as the installation of the above seat and the container installation.

-MC-172/Comanche/Vulcanair uses the Lycoming O-360 engine, Ford Trimotor uses the Boston Mercury engine, Eclipse-500 uses Pratt & Whitney 610F engine

-MC-172/Comanche/Vulcanair/Eclipse-500 uses small tires, Ford Trimotor uses large tires

-MC-172/Comanche/Vulcanair uses small propellers. Ford trimotor is available. Eclipse-500 does not use propeller nonsense!

-The recommended instrument installation situation

MC-172

MC-172 control panel no instrument position

Comanche

Vulcanair

The installation of the control panel instrument is the same as Comanche

Ford Trimotor's main instrument is the same as Vulcanair

Eclipse-500 main instrument is the same as Comanche

Eclipse-500 control panel instrument is the same instrument introduction as Comanche

Airspace

The airspace is used to indicate the instrument of the aircraft's movement speed (including height climbing) in the space

-At the critical instrument for flight and take -off

-Mou: BLK/S (block/second)

altimeter

The height table is a instrument used to indicate the aircraft flight height

-D display the current Y axis height

-The can be displayed by setting in the game as the height of the current distance from the sea level

-D number referred to the short needle is multiplied by the 100+ long needle index multiplied by 10 = the current height

-Mou: BLK

Gesture (Planet Line)

The attitude (the flat line of the artificial ground) is the instrument that indicates that the current aircraft rolled (rotating the rotation of the end of the head of the head) and the pitch (rotating of the two wings connecting the axis)

-A blue is heaven, brown is the ground, and the white line connected by the heavens and the earth is the level

-The white line is always parallel to the horizon.

-In the dive, point out to the ground, and the heart is pointing to the sky when climbing

-For the polarization (rotating from the top to the abdomen of the machine)

Navigation table

The direction table is a instrument used to indicate the direction of the aircraft flight

-Seking north and south is subject to the game (F3 can be viewed)

-It is very useful when it is aimed at the runway

Lift Reserve Indicator

The lift heavy meter is the instrument used to indicate the usage of lift use

-Chide in the red area is insufficient, and there are more lift in the green area

-Generally, keep it in the green area, and the red zone is likely to cause stall

Oil gauge

Oil meter is a instrument used to indicate the amount of fuel fuel of the aircraft

-It is empty on the left and full on the right

Fuel flow table

The fuel flow table is a instrument used to indicate the fuel consumption rate of aircraft

-Mou: BTK/m (barrel/minute)

Electric meter

The power table is a meter used to indicate the remaining power of the current vehicle

-The left is the remaining power (more up and down), and the power consumption rate on the right is the power consumption rate (the level is not power consumption, charging upward, and discharge down)

-S unit is not clear

Scalp

The flap wing table is a instrument used to indicate the position of the plane

-The long needle indicates the actual position, the short needle indicates the setting location

-S range 0-35, unit is

-In normal circumstances

Vertical climbing rate table

The vertical climbing meter is a instrument used to indicate the vertical climbing rate (aircraft height change rate)

-The above level is climbing, below the level is dive

-Ming: BLK/S (the number must be multiplied by 10)

Engine speed meter

The engine speed list is the instrument used to indicate the engine speed

-Dimal speed is slightly different from different engines

-ECLIPS-500 When starting the engine, you need to pay attention to this instrument, otherwise it will easily lead to the failure of the engine.

-In the unit is RPM (number multiplication 1000)

-The aircraft engine speed is really so fast

Engine temperature table

The engine thermometer is the instrument used to indicate the current engine temperature

-S unit is not clear

Oil pressure gauge

The oil pressure gauge is the instrument of the oil pressure in the engine

-Sex number with the engine speed change

-It does not seem to work

-Mou: PSI (pound/square inch)

Flat watch

The flat watch is a instrument used to indicate the flat situation of the aircraft

-Baiping operations are used to balance the center of gravity of the aircraft

-The above is a partiality of partial navigation

-The lower left is the situation of the horizontal roller

-The lower right is a pitch with flat situation

-The Ping Ping cannot be posted (back to the situation where the unauthorized level)

-The free adjustment of Pingping may lead to poor operating feel

Steering table

The steering table is a instrument used to indicate the rate of flight change (steering speed) and the direction direction

-Sololy parts to indicate the direction direction and the rate of change in the direction of the rudder position

-The following part indicates the location of the rudder in the real direction

One of the steering table, but use the horizontal roller to indicate the direction direction and the rate of change changes

-The roll situation, please refer to the attitude instrument (the flat line of the artificial ground)

-We part of the black block indicates the location of the rudder in the real direction

Know the manipulation

Next we will know the manipulation surface

Note that each model of the manipulation surface is slightly different

Auxiliary wing

The auxiliary wing is a manipulation surface installed on the outside of the wing. There are two pieces of manipulating surface, which are located on the two wings.

The auxiliary wing is used to control the horizontal gesture of the aircraft

-When the horizontal rolling action, the auxiliary wing will move, and then the subsequent wing will return to the original location

-The changes that have been made will not return to positive

Plane

The wing is a manipulation surface installed on the inside of the wing. There are two pieces of manipulating surface, which are located on the two wings.

The flap can be released from a specified perspective, which is used to increase the lift, which is equivalent to the additional area of the wing

The larger the angle of the wing, the more it is released

-In a single press when it is released, it will only increase the angle at one time without holding it down.

-The release of the wing will increase the air resistance at the same time, slow down the speed of airplane, often used for taking off, sliding and when landing -recommended to put away the wing during cruise to get a greater speed

Horizontal stability

The horizontal stable surface is a manipulation surface installed on the rear wing. There are two pieces of the manipulation surface, which are located on the horizontal rear wing on both sides.

-Ad the horizontal stabilization surface of [pitch], and the horizontal stable surface will return to the original location after letting go.

Rudder

The steering rudder is a manipulating surface installed on the vertical tail. There is a piece of manipulating surface, with position and vertical rear end

The direction rudder is used to adjust the partiality

-Ad the horizontal stabilization of the level when pressing [partial aviation], and then the flight direction changes

-Fill the horizontal stable surface of [partial aviation] to return to the original position, and the direction will rotate reversely

-The operating direction rudder can change the aircraft direction at a slower speed, but it is necessary to continue to fill the rudder, and this operation will greatly reduce the airspace

Ready to take off

The following inspection form is a non -professional checklist written by non -professionals, please do not use this to check the real aircraft

If there is any shortcomings, please comment on the comment area or private message

Checking list before flight

Stay the brake ...

The amount of fuel ....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... '

The wings ..........................................................................·· Retos

Instrument installation conditions ...

Check the checklist before flight to complete

After completing the checklist before taking off, you can perform the checklist before startup

Check the checklist before startup

Engine electricity ...

Stay the brake ...

Anti -push force device (if there is) ....................................................

Check the checklist before startup

After completing the startup form, you can enter the checklist before the taxi

Check the checklist before taxi

Press [Panel] Open the control panel ...

The engine magnetic motor switch .................................

The engine ignition button ...

Anti -collision light ...·Open

The engine condition ...........................................................................................................................................................................................................................................................................................................................................................................................most for mesered started

The flap ......................................................................................................................................................................................................................

Stay the brakes ...

Setting inspection form is completed

You can enter the taxi stage before completing the glide

Please press [Slotal Valve (increase)] until the engine is slightly lower than the maximum speed

Take off checklist

V1 ......................................................................................................................................................................................................................................................................................... '... v1 vr ... v1 vr ..............................................................................................................................................................................

Lift the wheel ...····

正爬升············································正爬升

Take a take -off checklist

-V1 is 10blk/s vr is 15blk/s

-MC -172 power flight speed is not high, lift the wheel V1

-Pelage the wheel movement, please press [pitch (top)] to lift the head of the machine

Check the checklist after taking off

The wings ..........................................................................···

Sailing light .................................................................................................................................................................................................................................................................................................................................................................................................................ress party inampins.

Check the checklist after taking off

After doing this above, you have successfully taken off!

Soaring sky

Adjust the partial flight, adjust the pitch, [roller] adjustment of the rolling

The steering can be achieved through [Rolling] (Fast) and [Bias] (Slow)

Note that the horizontal rolling action needs to be manually renamed the aircraft (the two wings return to the horizontal state)

[Pentagon] Adjust the aircraft push -ups, and the attitude in the posture is accurate to point the white line as the flat flight

In the gesture, the quasi -heart point to the sky is climbing, and the height of the aircraft will increase during this period.

The quasi -heart in the gesture is pointed to the ground as a dive. During this period, the height of the aircraft will be reduced.

Please check the vertical climbing rate table

Tips

-The properly raising the head when turning the roller can speed up the steering speed, but pay attention to the airspace to avoid the stall.

-When you need enough speed when you do the extreme action (such as barrels), otherwise it will cause stall and extremely difficult to change. At this time, it is recommended to abandon the machine

-Cap power on the way to fly? If the height is high, it can be set to 10 degrees and renovated to extend the gliding time

-If the motivation in a low height place, please set the flap to 25 degrees to land on the ground slowly, but please note that the vertical speed cannot be too large

-The water forced landing is allowed, but please recycle the plane after landing

-Invaling the direction of the direction of the direction can greatly reduce the difficulty of entering the field

Land

There are more operations for landing, and the situation changes faster, please randomly respond to

Preparation before landing

Please be aimed at the runway in advance and keep the direction. Since the roller cannot return to the horizontal position, please adjust the roller in real time to return to the original navigation

Recommend the route to the runway, and write down the coordinates of the center of the runway header

Check the checklist before approach

The flap ..........................................................................................................................................

Slotting valve ....................................

Air speed ..................................................................

Height ...

The runway location ...

Check the checklist before approaching

-Suctiles for landing, please judge by yourself

Ready to go

The following content is only for reference. It is recommended to judge by yourself in combination with experience

After aiming at the runway, the 500 -frame in front of the runway drops below the clouds. At this time, the speed is not greater than 25blk/s

When the runway enters the field of vision, it continues to fall to the runway head.

Land

Press [Powerback (below)] after grounding and holding the head of the machine and holding [braking], and pressing [Slotting Valve (Reduction)] to minimize the throw valve to speed up and slow down the deceleration

If you drive the Eclipse-500, you can press [Panel] to open the control panel, find a reverse force device on the control panel to pull down to open the reverse push, speed up the deceleration process

After the plane is parked, if you want the plane to leave the runway, you can keep the engine minimum power, and use the rudder to turn the plane to turn

Pull the handbrake after the plane is completely stopped

Check the checklist before the machine

Engine ...closure

Check the checklist in front of the machine to complete

Then you can leave the plane

The failure is still in the plan

-=||=-No brainless efficiency magic?Iron Puppet Snow Velvet Tower![Exbot] Extrabotany Minecraft GameAE Easy Storage Network [AE2] Application Energy 2 (Applied Energistics 2) Minecraft Game

Recommend