This tutorial is set by the author's setting without permission.

v1.0.2

Overall view

Corresponding synthetic tables: The second is the magic reform mentioned in the title, which requires botaniatweak as the support of the magic reform

It is just a symbolic description of the item: the practicality is very low, at least at least at this stage, the well -known magic -changing package that is not so mourned must be used to condense a large number of synthesis boards

Resource (integrated package) It is recommended to start download first, it should not be directly turned into 800B/s like Baidu network disk, at least 100kb/s ... the total amount is 60MB 60MB

If you have a good document publishing, please be sure to inform

https://share.weiyun.com/5FVJOPQ

Try a brief explanation first

1. Do not repeat the "pseudo -synthesis" maintenance system in the tutorial, you can see the part of the eight complete ME interfaces side by side. In fact, only 2 interfaces are used, corresponding to 4 output bus and 4 senders.

2. The area where the lemon yellow cable is located at the top is the automation of the printing board, which is used to renamed items. In fact, only one live stone is renamed

3. The map is very suitable for this kind of research. It is an ultra -flat magic glass.

4. When adding a new automatic synthesis, you only need to simply make a template.If the number of raw materials> 9 grids, the so -called "pseudo -synthesis" needs to be used, and the plan in the map should be imitated

5. Perhaps spoiler solutions]

5. The original Tyra steel synthesis table, the center of the center is living stone, and the four -corner block is also a living stone.Therefore, it is necessary to rename the stacking problem.

6. If the synthetic products are more than 3, there are extremely simple solutions.The tutorial will make up

7. The unpopular module (refers to botaniaatweak) as an automation core, it is actually difficult. Please think about it later

Theoretical difficulty

1. How to put a block

2. How to recover the block

3. How to recover the square while being able to place a block

4. How to identify where this block should be placed

5. What should I do if the middle and the four -corner squares are the same as after 4

Corresponding theoretical solution

1. The molding panel needs to be marked with items and exclude.The palm of the hand+the checkered box can

2. Digging the blocks of the lens, such as the magic pond, cannot be recycled.exclude.Pay attention to accurately destroy the panel: The piston cannot push a lot of blocks, and go out directly.

3. Difficulty

Consider the middle block, the front and back are other blocks, the upper part is a condensed board, and the following is selected to control.

Is it the same type of blocks under the palm flower, or to accurately destroy the panel?

Try to put the precise destruction panel+cable under the palm flower

Will fry:

What should I do if a blockpos must perform different functions at different times in different times?

Blockpos: coordinates ...

Maybe you still remember that there is a multi -square structure with extreme chicken ribs in AE2 -___________

Coordinates, of course, are related to _____!

4. Storage bus priority level, and the order in the template

5. The original Tyra steel synthesis table, the center of the center is living stone, and the four -corner block is also a living stone.Therefore, it is necessary to rename the stacking problem.

Actual solution!

The above space answer is: space tower, space

Blue Network: Main Network

Purple Network: Space Tower Network

Brown Network: Play soy sauce network, there are two two

White, gray network: Multi -material distribution (pseudo -synthesis) maintenance network

Orange Network: Sending block network, you can also use the brown network A to distribute items green network

Green Network: Synthetic items are distributed network.

Space tower structure with brown color network B (normal)

The brown network ensures that the space storage element used is re -pumped into the first grid

Space Tower Network (Destroyer)

If the inside of the space tower is not an independent network, it may be bug, causing the cable to become a drop

Synthetic material distribution:

The brown network is limited to speed, because the speed of the input bus is slow

1. The first material is sent to the orange network, 5 storage bus, 3 corresponding 3 gymnoconut boxes, and then corresponding to 3 palm flowers, placed and turned into 9 squares (1+4+4)The bus, a network interface connecting multi -item hair distribution and maintenance network, a network that connects the item that sends items in the middle.

2. Green storage bus receives the middle of the lattice box plus multiple items distribution and maintenance network

Then after the items are sent like this, you can directly synthesize

After the synthesis is completed, the space tower is activated, and then waiting for a period of time to be destroyed. The space tower is activated again to restore it to the state of the placement block, and then reset the locks in the figure above to receive the next item from the interface.