PAN (Pure Antimatter Network) Pure anti -material network

PAN allows you to copy various items by consuming energy and anti -material.

The PAN system is very simple. It is composed of the three machines of the PAN core, the PAN copy machine and the PAN converter. The three machines are close to each other.Import the PAN copy machine.

PAN core, no energy supply.

The PAN core is stored in the type of items that can be copied.

You can change the interface of D below to facilitate the energy required to copy a certain item.It cannot be copied by the red circle.

Pan copy machine requires energy supply.

The PAN copy machine has a total of 10 grades (Rank1-Rank 10), the higher the level, the faster the transmission.

The bottom can also be introduced to accelerate.

Put a copy of items and anti -substances inside. The replicated items are not consumed and only consumed antimatter.You can only copy some items in the PAN core.

The PAN converter does not need energy.

The PAN rotor can access the synthetic table of adjacent devices (such as the workbench, the furnace, and the Clayium machine), and import the synthetic item information into the PAN core for the PAN copy machine.

For example, put a workbench next to the side of the PAN rotor, and a furnace synthetic table on the left side of the Pan rotor will appear on the right (if there is no workbench, there will be no melting furnace).See the copy information of the furnace, and then put a melting furnace and anti -substance in the PAN copy machine to start copying.Copy only the original and Clayium items.(After the experiment, as long as it is not being circled by the red circle, it can be copied.) In addition, the Pan converter will only read the synthetic table of a machine next to it.The left and right arrows can choose a new synthetic formula.

Let ’s start to set up a PAN network to raise an example of industrial clay ingot.

Put a PAN core, the PAN copy machine is placed, and you can connect to the PAN cable.

Let's first make high -end industrial clay powder, put the grinding machine next to the PAN rotor, and put the advanced industrial clay in the connector, and the product appears.

Then make lithium powder.Portal reactor next to the PAN rotor.Here is because the IC2 is added to the lithium powder of IC2, which is used in the same way.

Then it will not be displayed if the clay reactor structure is incomplete or the level is not enough if the clay reactor structure is incomplete.Don't look at it for 8 to do it at a time, and when you copy it, it is still an anti -substance combined with clay powder.

If the sequence of the synthetic table is not right (the material in the NEI to the left), or the number of materials in the material

If you have not prepared the synthesis of lithium powder and high -grade industrial clay powder before, although the synthesis table of industrial clay powder will appear in the PAN converter, it will not appear in the PAN core and cannot be copied.

If you want items to appear in the PAN core, its materials must also be in the PAN core.

Finally, the synthesis of clay ingots for industrial clay ingots is enough.After that, you can copy it in the PAN copy machine.