This tutorial is set by the author's setting without permission.
If you come from https://www.mcmod.cn/post/1376.html, this tutorial has been greatly changed.
If you need to use it in survival, then this solution is feasible, but it is not necessary. It is better to directly install that box manual.
Restrictions: A compressor can only correspond to the synthesis of 9 strange points.
Use modules: Avaritia-1.2.2-3.3.0.33-Universal, CodeChicKenlib-1.12.2-3.2.2.2.354-Universal, Appliednergistics2-Rv6-Stable-7, and a client module.
introduction:
Sometimes when it is automated, we may need a lot of raw materials, resulting in the lattice of AE2's grids is not enough.for example:
Pseudo-synthesis-multi-raw material distribution basic use and scheme (Avaritia Strange Point Automation, TT Awakening Lingbao Automatic Demon Demon, etc.)
When looking at the long road of greed, the original storage of your home is not enough, and you click on the original of your home automatic synthesis.
13 Gaomun Setus 16 fluorite 16 glass 76 redstone 27 gold 40 silicon 108 any Ceterz 20 Setz pink ...
欸?These 10 groups?
How to plug the 9+ group of items into the raw material groove of the template:
ME network wants to synthesize a red stone strange point.However, 700 red stones are zero and 60 groups, and 9 grids cannot be placed.However, the previous 64K storage component, it continuously called the automatic synthesis of various raw materials synthesized by 64K storage components, such as 16K storage components and quartz glass, commonly known as "set baby" to achieve the purpose of calling a large amount of materials.
We know that the materials and finished products that process templates can be customized.So why not tell the ME network: a piece of paper, it is called "350 red stones", which is synthesized through 350 red stones; then tells the ME network: a red stone strange point requires 2 "350 red stones"synthesis?We only need to enter this paper to the network when the "350 red stones" are synthesized on the Internet!
(Prepare a few more, don't be eaten by the CPU)
Why use paper?It is cheap ~ There is no paper strange point (anyway, do everything, look at it yourself.
When do you send this paper?
Naturally, when the CPU needs it!
However, if it can be called in the main network when requesting synthesis, it will cause incomplete materials and failure.
There are several solutions:
1. Let it add a "token" to its synthetic template outside the main network. As the materials are distributed together, they need to be separated.When the token is separated, the paper corresponding to the token and the token is returned to the main network.Of course, this paper needs to be separated when it is distributed next time.
Of course, it is also possible to use a sender+synthetic card.
Advantages: easy to think of
Disadvantages: Add synthetic tables to be implemented through amplification and distribution processing device marks.
2. Make it cache in a box, and the storage system that cannot be entered into the main network is called: *There are 3 results that appear back to the network immediately: 1 is intercepted by the CPU.2 Enter the storage system.3 Intercept and use it by the synthetic panel.The CPU is the most preferred.
{{
When trying to enter, if the CPU is not needed
(1) Do not enter: Let the storage system of the main network not accept the renamed paper
{{
Advantages: No limit
Disadvantages: If your main network's items storage system uses only one storage bus to store the ME interface of the sub -network through the sub -network package, then congratulations, you only need to mark the paper (fuzzy card) on that storage bus on that storage bus.Just blacklists.(If you think, you can add the unsatisfactory paper labels on the white list).
But if you don't do this and are unwilling to change it like that, then you may have to mark all the storage bus and storage elements again.
}
(2) Intercept the molding panel, and use a series of methods to return the cache box
It does not unfold in detail, involving drops, similar to (4) (3) the storage bus stores to a device similar to funny buckets
Similar to (4) does not expand in detail
(4) The renamed paper in the box is not needed by the "only write" storage bus with the input bus.
{{
Advantages: Do not make special requirements for network storage structures
Disadvantages: When the number of renamed paper cached in the box is N, 1
}
}
How to achieve it?
Use 2 (1).Although that shortcoming is really a big disadvantage for novices, you can always change it ... Anyway, I do so, and manage them uniformly.And in fact, it is not troublesome to change, and it also saves channels.1. Paste a ME interface on the head of your compressor, which is equipped with a template with a renamed "350 Red Stone"
2. Paste a ME interface for the box that cached the renamed paper, which is equipped with a mandarin template.
3. Paste an input bus in the box
4. Set the storage system
5. A device that accepts the finished product under the compressor, enter the bus or funnel+ME interface.
6. Put a full amount of renamed paper in that box to start synthesis
Will Tieqi and Red Stone Qi Point be mixed?
No, it will not accept iron blocks in the synthetic red stone strange compressor.
I have too many modules!
It is not enough to put 9 groups in the previously set "350 Red Stone" ... It's okay, what we have done before you can do it again:
"Let" Red Stone Strange Point 1 "= 350 Red Stone
"Red Stone Strange Point 2" = 500 "Red Stone Strange Point 1"
Strange Point-Red Stone = 4 "Red Stone Strange Point 2"
The first template is still placed on the compressor as before, and the two templates can be placed in the previous box.At least 500 "Red Stone Strange Point 1" and 5 "Red Stone Point 2" should be placed in the box
Please ensure that your CPU is large enough, at least 704068 bytes (exactly according to the above, it should be)
If it is a large quality number ...
The distribution of paper can be 100A = B, 10B+10A = C.
