First of all, you need such a structure, and use a cable network to link the portal and computer

Open the computer, enter wget http://alist.liulikeji.top/d/hfs/mek/csm/startup.lua

Wait for download, restart manually

This interface needs to be configured

The meaning is as follows

You need to ensure that the frequency is consistent and the channel is consistent

The frequency of transmission door needs to be established in advance (public channel) cannot use private channels

Then you need to set the computerid (number of layers) per door, which is the number entered on the panel

After configured, click the big save below, and then click Reboot

Then configure the computer in turn so the portal of the portal

This is an elevator panel. The digital keyboard in the middle is input, the lower left corner is deleted, and the lower right corner is confirmed

The upper left corner is the current floor, the upper right corner is the link situation, the error is red, the normal is green, and the standby is orange

The number disk input the corresponding transmission door number (floor) and then click the green button, the portal will open

It will be closed for a while. If the link indicator becomes red and then returns to the orange, then your network is not connected, or there is no such floor at all, please check the wireless modem

At this time, the portal is red, standby status, waiting for the next link