Status 1 Status 2 Basic Knowledge

The magic flow between the magic ponds equipped with sparks is spread and upgraded-> No upgrade-> Gathering and upgrading

After receiving the rise and rising signal of the sparks, the spark upgrade will be upgraded to the spark upgrade of the neighboring Magic Pond.

Working state

Magic Pond Status 1 Magic Power Flowing Status 2 Magic Flow to Magic Source (the right in the picture) without spark no spark upgrade Magic source-> the first group without spark upgrade

The first group (right in the figure) Gathering and upgrading the first group of sparkless upgrade-> The second group

The second group (in the picture depends on the middle) diffusion and upgrade

Second group-> third group

Gathering and upgrading the third group (left in the picture) without spark upgrade and spreading and upgrading the third group-> destination

Destination (the far left in the picture) no spark upgrade

No spark upgrade

The timing switching between the two states is achieved through the hourglass (the more the magic pool in parallel, the shorter the switching time should be)

The device can be extended by the device to extend the transmission distance (the longest transmission distance of each set of devices is 48 blocks).

You can speed up the transmission rate by giving each set of parallel magic pools (theoretical transmission speed is the number of parallel magic ponds*1000MANA/T).

The delay of the relay delay will cause short -term magic backflow. When the switching time is long, the impact is not great. It can be eliminated by adding the same delay to each set of spark craftsmen.