Regarding the changes of the door GUI:

Take iron and door as an example.

Remarks: The tutorial on the left side of the GUI. This tutorial is called a condition slot.

1 The most obvious change is all conditions that can be detected by the door, and all the operations that can be executed are listed on the left and right ends of the interface. Drag it in the GUI with mouse. All conditions listed on the left can only be dragged on the left.In the condition slot on the left, all the operations that can be executed on the right can only be dragged into the operation slot on the right.(Empty conditions and operations play a deletion effect, and can be dragged arbitrarily.) This feature has been added at 7.2.x;

2 The condition of the Always ON (always open) is added;

3 When setting the child condition/sub -operation slot (second slot), you need to click the slot, and the surroundings will display the sub -condition/sub -operation that can be set, and then you can set it.

Regarding the change of BC door performance:

1 When the connection bar in the middle of the GUI is disconnected, the conditions and operations of each line settings of the door will not affect whether it is with the door or the door;

2 Left -click the interrupted connection bar to connect the door settings to each other;

3 When the door settings are connected to each other, if the door is with the door, when the conditions in the door settings connecting each other are met, all the operations that are connected to each other;

4 When the door settings are connected to each other, if the door is or the door, when any condition in the door settings of the connected door is met, the execution of the door settings that connect to each other.

About the production and upgrade of the door:

Making of the door:

The corresponding door is made in the assembly table; (such as 1 iron chip → assembly table = 1 iron and/or door)

Or make it directly in the workpan; (such as 3 iron ingots+1 red stone +1 pipe plug → workbench = 1 iron and door)

The door and the door can be converted in the workpan.

Upgrade of the door:

After BC entered MC1.11 and 1.12, a large number of doors were canceled, and the door upgrades were replaced.

Note: The oblique body is upgraded in the assembly platform, and the thick body is upgraded in the work office

Upgraded materials: 1 The number of headquarters set by the quartz chip door is reduced by half, and each condition/operation slot is added to add a slot;

1 Add a slot after each conditional slot of the green stone;

1 The number of headquarters set by the Diamond chip door is reduced by half, and three slots are added after each condition/operation slot;

The expansion plug -in of the door is changed to insertable forms. For details, see the light sensor and pipeline pulse