This tutorial is set by the author to use the CC By-NC-SA protocol.
Here is the CMPA module introduction post. We are introduced by joint production module to promote more group groups for the purpose of CUSERFORGE.If you want to get more tutorial resources, you can access the CMPA module ingredients.
Foreword
Enderio (last shadow interface) believes that everyone is no stranger, this is a great module.
The module has a lot of interesting black technology equipment, such as "skull installation".Various practical machinery, such as killer Joe, experience recipes, electric brushing cages, and so on.
But the most famous is that it should be a variety of catheters in one grid!
Below I will introduce the content of this module relatively detailedly.Note: This tutorial is based on Enderio-1.12.2-5.0.26
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------—
1. Installation and Chinese
Drag the downloaded mod (.jar file) into .minecraft/mods
Download address: github official website GitHub
Necessary front: the core of the last shadow
Regarding the problem of Sinicization, the Chinese file in this module is a .Guess file that could not be read normally and required external Sinicization
Method 1:
You can use the simplified Chinese Sinicized resource package provided by alcoholic acid bacteria to solve this problem. You only need to drag the downloaded resource package into .minecraft/ResourcePacks, and then read the resource package like loading materials in the game to complete the module to complete the module to complete the module to complete the module to complete the module to complete the module to complete the module to complete the moduleChinese
Download address: liquor extent-simplified Chinese Chinese resource package
However, the current disadvantage is that there is no shortage of sinicization entries for eiOs of 5.0.26 version of EIO.
Method two:
This post provides you with the latest Chinese document. You can download it after downloading
The Chinese document is based on the Sinicized resource package of winestrite, and has modified 2 translations of the wrong entries, adding 75 Chinese entries
Download address: Sinicization File of the Last Shadow Interface
Password: 4QJC
Installation steps:
1. Find the enclosure.jar file in the .minecraft/mods. You can use the decompression software to open it to view the content
2. Select the sub -directory assets/Enderio/Lang in turn, and add the decompressed zh_cn.lang to the LANG folder
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2. Materials and Machines
1. Basic entry and simple machine
EIO has changed a lot in the 1.12.2 version, and the synthesis is more complicated and expensive!
In order to synthesize the first machine and equipment, first of all, you need
Use the fire stone to ignite the base rock. After 13 seconds of combustion, there will be a 50%probability to obtain a [base rock powder].
After getting the base rock powder, you can start the synthetic machine frame mold and iron gear
Use them to make the first power generation equipment -simple Starlin generator, which is your main source of energy.
Simpling generator can burn solid fuel (compatible with other modules). After adding EIO, you can see the combustion time of all combustibles
Calculation formula for power generation: Burning time*20 μI/TICK
But it has a disadvantage: the power cannot be retained for a long time, it will lose internal electricity at a speed of 1 μI/TICK, so you need a basic capacitor library to store power
Put the capacitor library next to the generator to import the power. The karate SHIFT+right -click the container library can change the display content.
With the power generation equipment and electricity deposit equipment, you also need to make a simple alloy furnace and a simple SAG grinding machine. They are all necessary machines you develop to the next era
Simple alloy furnace: Burning a variety of materials into a brand new material, mainly used for making alloys.
Simple SAG grinding machine: grinding minerals into powder can double the minerals.
The energy consumption of the simple SAG grinding machine is 800 μI/time.
These two machines will also lose internal electricity at a speed of 1 μI/TICK, so it is not recommended to power the machine for a long time in the early stage.
---------------------------------------------------------------------
"Configuration IO" introduction:
Each EIO machine has a "configuration IO" button, which can automatically input or output items by the six surfaces of the machine by configure the interface.You only need to drag the interface to observe the various surfaces of the machine and use right -click to adjust the five modes of "input", "output", "input/output", "closing", and "blank" of the surface.(PS: The role of energy transmission of each surface of the EIO machine, only when the setting mode is "closed", the surface will be prohibited from energy transmission))
-----------------------------
Instructions for power unit:
In 1.12.2, EIO uses a new power unit μI. Its conversion with other energy units is: 4 μI = 4RF = 2Ae = 1EU = 10J
Actually it is the RF change of the shell, and the RF is also available
------------------------------------------------------------------------------------------------
2. Advanced machine and advanced generator
Make organic black dyes and organic green dyes through the two machines introduced earlier to synthesize machine coatings.More advanced machine frameworks require machine paint to make
----------------------------------------------------------------------------
Capacitor: In EIO of version 1.12.2, you need to insert an arbitrary level of capacitance if you want high -level machine work.
Processing equipment: processing time = total power consumption/machine consumption per TICK.Therefore, the higher the energy consumption, the faster the processing speed.(For most machines, the effect of double -layer capacitors is three times the basic capacitance, and the effect of eight -bit capacitors is 5 times that of basic capacitors)
Capacity equipment: The unit time is higher and the capacity time is prolonged.(Increased total power generation)
----------------------------------------------------------------------------
It can now make Sterling generators, which has higher and faster power generation efficiency.
Basic capacitors: 80 μI/T.Double -layer capacitance: 100 μI/T.Eight -bit capacitance: 140 μI/T.
The alloy furnace is divided into three modes:
1. Limited to alloy: one material is burned at each time.
2. Limited to the furnace: three materials for each time.
3. All burning: In this mode, one of the two modes of "alloy" or "melting furnace" will be processed first.
Note: If the material is required in the middle and late stages, it is not recommended to adjust the mode to "all burning."For example, I need to automatically synthesize a group of magnetic steel ingots. One of the materials is iron ingots. When the integrated package is equipped with technical rejuvenation, the iron ingot will be burned as refined iron ingots, and the card synthesis will occur.
For the calculation of the SAG grinding powder milling beaded, the landlord has added it to the Chinese file. You can move the mouse to the corresponding position in Jei to see them.
Burning generators and enhanced combustion generators can provide you with greater power generation. They produce electricity by consuming liquid fuel and coolant (all compatible with other modules).
The three liquid fuels that EIO comes with are flame water, rocket fuel and spirits. If you want to get them, you must use the wine barrel
Put the liquid and two types of fermentation items into the wine bucket, it will start working. The items placed will directly affect the efficiency of the liquid, but it will not affect the electricity and time consumed by the liquid.
For example, I use flour (3.0X) and sugar (1.0x) to make spirits. The proportion of spirits is 1000: 250, then each brewing requires 1000MB*3*1 = 3000MB of water, which produces 250MB**3*1 = 750MB of spirits
If it is too troublesome to burn the generator, you can also try solar power generation. There are four photovoltaic boards for you to choose from
Simple photovoltaic board 10 μI/T
Photovoltaic board 40 μI/T
Enhanced photovoltaic board 80 μI/T pulse 160 μI/T
Note: The quartz glass above the synthetic table can only be obtained by firing 4 lower seartings in the alloy furnace, and the color is not limited.
Soul machine
In addition to the machine framework, the machine framework mold can also make another material -soul machine framework. You need to synthesize organic brown dyes and organic black dyes first to make soul coordination coating powder and get it in the alloy furnace.
The soul machine framework can be used to synthesize the soul binder and the skull assembly. They are essential for more advanced items
Soul binder
The soul binder can combine the soul bottle equipped with creatures with the damaged brushing cage to make the brush cage you want
It can also make crystals in combination with soul and crystals
But note that the operation in the soul binder requires experience to perform
Skull
Note: The type of skull is not limited
It must be equipped with ax and scissors in the skull installation before it can be used normally
There is nothing to say about it made here, it will be mentioned in detail later
Functional machines and zombie generators
Electric brush cage
Note: The type of skull is not limited
The synthesis of electric brushing monster cage needs to be used for a Z-logic controller, you need to make it in the skull assembly
However, the content of the electric brushing cage just made is "empty", and there is no biological creature that needs to be generated
In order to allow our electric brushing cage to brush out of creatures, we need to bind it with a damaged brushing cage in an anvil, which will consume you with level 16 experience
The damaged brushing cage can be obtained by destroying the original brush cage. The damaged brush cage and the soul bottle that pretending to brush the creature you want to brush can be binded in the soul binder to get the brushing you need to brush the monster you needcage
Note: The binding electric brush cage can be modified to modify the binding content, but the number of binding is still 1, which cannot be changed by configuration file
Electric brushing monster cage mode supplement:
There are two modes of electric brushing cages in a total of two modes of "generation mode" and "capture mode"
Genetic mode: In this mode, binding creatures will be generated within the range. The consumption of power depends on the generated creatures. Each generation time is uncertain. You can increase the speed of the creature by inserting high -level capacitors to increase the speed of the creature.
Capture mode: Install the creatures bound to fill the monster cage in the soul bottle. The power consumption depends on the creatures that are filled.
Zombie generator
To make a zombie generator, you first need to synthesize a zombie electrode in the skull installer
Although zombie generators are slightly slightly displayed than solar power generation, if you have a high-efficiency goblin and sugarcane field, zombie generators are also a good choice./T power (basic capacitance: 80 μI/T, double -layer capacitance: 100 μI/T, eight -bit capacitance: 120 μI/T), at the same time, consumes nutritional essence at a speed of 12T/MB (about 0.084MB/T).
Note: The glass color is not limited
The volume of the internal nutritional essence of the zombie generator is 2000MB, and it will only be activated when the reserves are greater than 1400MB
Killer
If you want to synthesize a killer Joe, you need to be binded with Z-logic controllers in the soul binding device in the soul binder
Killer Joe does not need to consume electricity, it will only consume nutritional essence at 5MB/time to attack the creatures (except players), and the attack effect is the same as the player
But the damage it causes depends only on the weapons that are put in. In the face of the monster grinding bed and the charming thorn of the monster grinding bed and plant magic in the face of withering, it seems weak.
Planting station
The planting station can be completely enough to replace your handmade farm, and it can be compatible with the mysterious agricultural module to harvest various essences. It can also be used as a tree field. You only need to put a hoe and ax (you can use TIC2 crane mouth to hoe) andProvide enough electricity (super power consumption) to work
In addition, the working area and seed reserves of the planting station are affected by the plug -in capacitor. Basic capacitors: 7*7*1, double -layer capacitance: 11*11*1, eight -bit capacitance: 15*15*1
There are four directions in the planting station, which can be planted at the same time. Even if you only need to plant one, you need to put seeds in 4 plaids.
Third, pipeline transmission articles
Pipeline basis
EIO's pipeline is undoubtedly the most proud of it. Through configuration of the catheter and filter, you can achieve almost all automated projects, because the biggest advantage of the EIO catheter is that it can support placing a multi -rooted pipeline in a block in a block.EssenceIn addition, 1.12.2 new redstone signal filters can compress the huge redstone circuit, which can basically replace SCM in 1.12.2.To make EIO catheters, you first need to synthesize the bonding embryo, and then furnish it as a duct binder. It is a must -have material for making a catheter
With the catheter bonding agent, we can start making the catheter catheter catheter
First of all, you need to synthesize the item catheter in the workpan
The catheter can be extracted or entered in a set of 4 items as a set of containers. It will actively connect the container or machine (including the machine that has been set off) containing the item storage space.A catheter interface, you can open the GUI by right -click to configure this catheter interface
1.12.2 The EIO of version has changed the GUI to a certain amount of GUI. It will be added and extracted into a interface. Next, it will explain in detail the GUI function
You can check out the features you want. Of course, if you are not checked at the same time, the game will turn off the interface
The color blocks below the adding items filtering and extracting items are the item transmission channel. There are 16 colors. The items added and extracted will be stored in the corresponding channel in the catheter, and will be extracted and added in the interface of another channel.You can distinguish its channels and status through the color and direction of the arrows at the catheter interface
Priority: The priority can determine the order of the catheter input item. When one or more containers export the items with the same channel, if the priority of the A container is 0, and the priority of the B container is 1, then the channel is the channel, then the channel is the channel. Then the channel is the channel.Only when the B container is full, the A container will start to receive items
The right side of the green blocks below the extraction item is "circulating conveying mode" and "self -supply mode"
Circular conveyor mode: When the circulating conveying mode is turned on, the container responsible for the output will be "one group" (a group of defaults here, depending on the number of speed plug -in to increase) as the unit, to each one on the corresponding channel, each one on the corresponding channelThe container transmits items in sequence, and there is a certain transmission order (high priority priority, first priority).For example, when the container A continues to output items outside the cycle, the same three interfaces of the same channel are B, C, and D, where the priority of the interface D is 1, and the priority of the interface B and C is 0.Then the order of interface B, C, and D receives the order of the item is D, B, C
Self -supply mode: The model that is about to provide itself to its own product will be provided to its own. In this mode, the pipeline will withdraw the items in the product slot back to the processing slot (although I don't know what machine needs this kind of processing method), pay attentionTo turn on the supply mode, you need to open the addition and extraction at the same time, and the channel is consistent (the best priority is higher than other containers)
Redstone signal control adjustment: You can control the output of the pipeline by adjusting the redstone mode.In the mode of not working ", the color of the redstone signal can be adjusted, which will be mentioned in the redstone catheter
Filter: Specify items that are added and extracted
Speed plug -in: The speed of pipeline transmission can be adjusted into the speed downgrade of the ductage and the catheter speed upgrade
Two types of ducts can only be inserted in the lower speed upgrade, and the transmission speed is reduced to 1/"group" after insertion; the speed upgrade of the catheter can increase the transmission speed of 4/"group", up to 15 (that is, the maximum 64 64 (that is, 64 maximum 64One/"group")
Energy duct
Energy catheter can help you conveniently transmit energy. The power transfer is much larger than the faithful energy pipeline of the TD, and there is no power line loss
Energy catheter is divided into three types: energy catheter, reinforced energy catheter and last shadow energy duct
In the GUI of the energy catheter catheter interface, you can only configure the input/output of the energy as the redstone signal control. The content
Their electricity pass is 640 μI/T, 5120 μI/T, 20480 μI/T
Redstone catheter
The role of the redstone catheter is equivalent to the original redstone line, but it has three benefits: frequency adjustment, strong charging energy, no signal attenuation
It will be connected to the machine or the original redstone device that can be sent/acceptable to the redstone signal and forms a catheter interface. You can open the GUI to configure this catheter interface by right -click
You can set the catheter interface of the output redstone signal whether the other party has a strong charge (do not understand what is strong and charge, please go left to the left into the redstone column).
Fluid duct
As the name suggests, the fluid pipe can help you add or draw liquid in liquid containers or in the machine (unable to interact with world)
Note: The liquid duct is made of pure glass and made by firing glass. The color is not limited
Note: The above two catheter uses quartz glass, the color is not limited
The flow in the general fluid duct of EIO not only depends on the viscosity of the liquid, but also affected by gravity. If you want to solve this, you can use a high -pressure liquid catheter
As for the last shadow liquid catheter, it is even more special, it can allow multiple liquids to pass
Note: The liquid catheter can also be configured channel and insert speed plug -in and filter, but I do n’t know if it is characteristic or in the author's original intention. At present, only the last shadow liquid catheter can be configured.Can't insert the ME catheter normally
The ME catheter is a linkage object of EIO and AE2. Under the premise that you already have the last shadow interface, if you are installed with application energy, then you can start making ME catheter and ME dense catheter
Note: Faru Iks Crystal can be replaced by high -purity Furux Crystal Crystal
The ME catheter and ME dense can transmit AE energy and 8 channels. It cannot be connected to P2P and ME panels. It cannot view the channel occupation through TOP. However, it can be placed in the same block with other EIO pipes.Glass cable and ME bag layer cable
Fourth, pipeline filtration chapter
Item filter
The item filter can add or extract specified items to the fixed container according to your ideas. The most basic, you need to synthesize a basic item filter first
You can put it at the addition of the intravenous catheter and the filter upgrade of the extract area. After putting it in the filter, a gear editing filter will appear. After clicking, you can check the GUI to configure the filter information
Basic items filters can only be set with 5 filter items. In addition, it can also be equipped with black/whitening list and matching/ignore meta data
Meta data
Every item in my world has its own English ID and digital ID. The game sets the same ID to some similar items of the same kind. In order to distinguish these IDs in the systemThe previous additional numbers will be added. The number used to distinguish the same category items is called Meta data.
Such as: white wool 35: 0 yellow wool 35: 4
Blacklist: Allow all items other than setting the filter item pass
List of whitening: That is, only the items contained in the setting item are allowed to pass
Matching META data: Consider the impact of the added value of Meta during transmission (it can be understood as items that only transmit you marked without transmitting similar items)
Ignore META data: Do not consider the impact of the added value of META during transmission (it can be understood as all similar items that transmit the items you labeled)
If you feel that 5 grids are not used enough, you can try large items filters
It provides you with 36 to configure items, and other settings are the same as basic items filters
If you are busy with the automation of forestry beekeeping, but do not know why, the following high -end item filter will definitely meet your needs
You can also put it in the catheter interface to configure the filtering information. You can also hold the high -end item filter shift+right -click to open its GUI
Advanced items filters provide you with 10 to configure items. In addition, it also has more advanced configurations to choose from
Stagging mode (upper right): The catheter interface that enables the stagnation mode will actively absorb the items filtered by high -end items filters (universal black/white list).Priority receiving, followed by close receiving, after turning on the stagnation mode, the priority of the adhesion mode interface is higher than the high -priority interface, and the items they are filtered first will be received
Note: The viscosity mode will only appear in adding items filters
Mineral Dictionary (bottom left): After opening the matching mineral dictionary, the filter will transmit all items that are the same as the labeling item and mine.
NBT data (middle and lower): After the catheter interface is matched with NBT data, it only transmits items that are exactly the same as the NBT data of the filter item (not just the same number of NBT labels, the same content is the same)
Durability filtering (lower right): The default is to ignore durability. After opening, you can filter items containing durable labels according to the range you set
NBT data
NBT is actually a file format. The full name is named Binary Tag. In short, it is a detailed configuration of the content of the item. For example, does the container contain liquid and how much liquid contains?These contents will be expressed in the game in the form of NBT data. The container containing liquid will have an additional NBT data. NBT data can be understood as a file describing the state of the item.You can open the number of NBT labels of the item through the button F3+H.
Similarly, high -end items filters also have its upgraded version, high -end large items filters, it can also provide you with 36 to configure items
If you feel that the 36 grids are still too small, and you want to filter more things. If you feel that it is too troublesome to filter one by one, then try this existing item filter. The existing items filter has the existing item filter.The larger configuration bar (how big the box is, how big the configuration bar is, the dragon box is full of can record the snapshot), you only need to hold the existing items filter to the box of the items shift+right -click to save the snapshot to the filter to the filterIn China, you can view its GUI in the air Shift+right -click, and of course you can also use it in the catheter interface to view
The 5 configurations above have been introduced earlier, and here is the following 4 items below
Snapshot: When a snapshot that does not configure the existing item filter, you can use the key to directly record the items connected to the container where the filter interface where the filter is located as the snapshot of the filter; if your existing items filter already contains the snapshotInformation, then this information will be replaced by the items in the container connected by the duct interface where the filter is located
Merger: merged the original snapshot in the existing item filter and the items in the container connected by the duct interface where the filter is located.
Cleaning: Clear all snapshots information in the existing items filter
Note: In a certain characteristic, you cannot empty the snapshot when holding the existing items filter. You must also exit the snapshot when you exit in the catheter interface.
Show: View the snapshot information recorded in the filter, but only 126 filter items can be displayed at most
Finding items filters, it can help you filter items that carry energy NBT data, but no items that do not contain NBT data can be allowed to pass
Its filtering function defaults to the white list mode and cannot be changed
On the left side of the GUI is the selection operator, optional "=", "<", ">", "<=", "> =". These operators determine the filter range of the filter's percentage of the energy than the right side. YouCan control the energy ratio of the transmitted items by configuration
Note: You can only set up a semi -open semi -closed range or closed interval filter with only one separate energy filter. If you want to set up a "25%<75%" interval, you need to transmit it to each other.One filter is inserted at the addition and extraction of the two catheter interfaces for filtering (be careful
Module items filters can realize the functions of all items in a module in a module
Module items filter is different from the filling item filter. It can adjust the filter content by adjusting the black/white list
At one time, it can be configured with items in 3 modules (the "module" here includes the original version of Minecraft: an item that starts with the English ID).Click in the tag bar to complete the mark of the module once. By the deleting key, you can remove the labeled module
Restricted items filters, also known as counting items filters
Its GUI is similar to the high -grade (large) item filter, and it can also configure the stagnation mode during input, but it cannot adjust the black/whitelist. The default is a white list
There are a total of 10 to configure items, which is different from the previous filters. Limit the number of items can control the number of items when filtering items.When adding filtration, you can keep the number of items in the input container as the amount of configuration of the filter item; when it is used as an extraction filter, you can also cache the number of items with the number of configuration quantities in the extraction container.
Put the filter that has been configured in the synthetic table to empty its configuration information, and put a configuration filter with a blank filter into the synthetic table to copy the information (only the same filter), this, this, this, this, this, this, this, this, this, this, this, this, this, this, this, this, this, this, this, this, this, this is the same. This is the same.Two techniques are also applicable to the following two filters
Fluid filter
The fluid filter can help you filter the parallel fluid in the last shadow liquid catheter
After opening the GUI of the fluid filter, you can configure its filter information
Click the bucket with a liquid you needed to mark to make the fluid marker into the fluid filter (capsule compatible with FR, IC2 liquid unit, MEK dripper, etc.)
Redstone signal filter
1.12.2 EIO's newly added redstone signal filter can be said to be the gospel of red stone players. Instead of being a filter, it essentially restores the logical door, signal lock and timing system of the original edition of the original red stone.A series of automated operations can play a good role (the content of this chapter has a certain amount of redstone basic viewing effect)
There are 12 newly added redstone signal filters, and only one can be found in the creation mode item bar. Here
Basic redstone filter cannot be used in the catheter interface, only as synthetic materials to participate in other redstone filters synthesis
The three filters above are non -door redstone filters, or door redstone filters and door redstone filters
These three redstone filters can only be inserted to the signal output terminal (the signal input and output of the catheter interface are relatively relatively reddish catheter). Among themNon -door redstone filters do not have a configuration interface, but can transmit redstone signals in the reverse (that is, when the input is 0, the output is 1; when the input is 1, the output is 0).When the inserted filter is a non -door redstone filter, the redstone signal will only be transmitted in the catheter interface of the same channel, or the door is different from the door.After inserting the catheter interface, a gear -shaped "Edit Filter" button will appear. When you open it, you can configure the redstone channel analyzed by the filter
You need to configure these two information to determine the redstone channel received by the filter. When the item is configured, the signal color of the original redstone catheter interface is not played.Note that there must be at least two channels in the entire Hongshi network
When the signal in the channel meets the trigger conditions of the logical door, the catheter interface that outputs the redstone signal will transmit the redstone signal outward (if you don't know the operation logic of the logic door, you can Baidu on your own)
The two filters above are or non -door erythered filters and non -door redstone filters. The usage method is similar to the or door redstone filter and door redstone filter. It can only be inserted to the signal output end
Or non -door and non -door actually combine the or door with the door, which is equivalent to the opposite door and the door. Therefore
These two filters are different or door red rock filters and the same or door redstone filter, which can only be inserted into the signal output end
There are 2 inputs and 2 outputs of the same or the same door, so you need to configure the redstone signal you need to analyze
Different or doors only output when the input value is 01 or 10 (that is, when the 2 input end only has one input), and the same or door is an reverse or door of the door.
These two filters are no longer a logical door filter. They also have their own functions, which are locking redstone filters and scheme redstone filters (only the signal output terminal can be inserted)
The locking redstone filter is equivalent to the redstone signal lock device. It can save an input redstone signal and continuously output. Only when it receives the redstone signal of the input value once, it will change the red redThe internal value of the stone guidance pipe (can be understood as a switch, open it once, and then close it again). The filter cannot be configured and can only receive and lock the redstone signal of the same channel
The countless redstone filter can be adjusted through the internal number configuration. If I adjust the number of times to N, then the tide redstone filter can only send an redstone signal once the redstone signal is received (only record the same timeThe signal passed by the channel interface of the channel), and this signal is continuously issued. Only when the same frequency signal is received again, it will be disconnected
Those who do not understand the scheduled redstone filter can understand it as a cycle per receiving N times to receive the N times. Among them, only a continuous signal will be issued when only the nth receipt is received.At the beginning, naturally there will be no signals issued
The last two are induced redstone filters and chronograph redstone filters. These two filters can only be inserted into the signal input terminal
The effect of induction redstone filter is equivalent to an original sensor. The exported redstone signal strength is related to the number of items contained in the induced container. Because there is no signal attenuation in the redstone catheter, it does not affect the redstone signal signal signal.Passing, but the redstone catheter can connect the original redstone line, and its signal strength can be expressed in the redstone line
Sensor redstone signal strength calculation: 15*(the number of items contained in the container/maximum capacity of the container)
The chronograph redstone filter can spontaneously send a section of 1 redstone (2ticks) long redstone signal without relying on the outer input redstone signal.Also tick)
Attachment: The chronograph redstone filter and the measured redstone filter can be used in the same channel at the same time. At this time, the time of the redstone filter to send the signal outward will change. When designingThe time of the redstone filter is n, so the frequency of the redstone signal sent out to the outlet is m*(n-) ticks/time
5. Auxiliary tools
Ether
Like other technology modules, EIO's Ether Wrench can also be used to configure machines and adjust the pipeline
Hold the Ether Wrench, hold down the Shift key and roll the bond in the mouse to adjust the visual state of the Ether wrench to the catheter.When setting "," All ignores "and" All Visual ", when the hits are tuned to the first 4 (5) type, the hand holds the Ether wrench, you can only see the type of catheter you set, which can facilitate you in youMany pipes to adjust the catheter you need to configure
In the setting mode, the catheter and the catheter framework are visible, which can slow down the stuck of the computer
In all the modes, you can only see the catheter framework and ignore all the catheter.
As mentioned earlier, you can distinguish the input/output situation and the channel where the arrow in front of the catheter interface is observed. When you use the Ether wrench to right -click the arrow, the catheter interface will be "output/output" and "output" and "output"."Input", "Close" changes in order. When a catheter interface is closed, it will not connect to the container or machine again
If you need it to continue interacting with the container or machine
Used to click on the side of the guide or the machine (pictured), you can re -connect the catheter and container
The same catheter will be connected by default. If you want to separate the two catheters and make them run independently, they can also be achieved by the Ether Wrench
As shown in the figure, the connection part of the right -clicking the guide pipe can be disconnected to disconnect the two connected catheters. The method of interacting with a catheter and container can also make the disconnected duct
Of course, you can also configure the EIO machine to use the Ether Wrench to right -click the side of the machine and click any surface of the machine to configure its IO state
When there is multiple guide interfaces on the catheter at the same time, you can hold the Ether wrench Shift+right -click the catheter. At this time, there will be 6 noodles configuration options for this catheter. Click the button you need to configure the direction where the catheter interface is located.You can enter the GUI of the catheter interface
Catheter probe
The catheter detector can help you easily detect the connection configuration of the catheter and the configuration information that allows you to easily configure the catheter and copy the duct
The catheter detector has 2 modes: "detection mode" and "copy and paste mode", you need to hold the catheter detector Shift+mouse roll in the middle of the mouse to adjust its mode
Detective mode: The use of energy catheter can detect its energy flow through
Copy and paste mode: For the use of the catheter interface, shift+right -click a catheter interface to copy the configuration information in the interface. Right -click another interface to save the copy of the contents of the interface.
Space conveyor
Space conveyors can transmit energy, items and fluids in the same latitude
After opening the GUI of the space conveyor, you can choose from the three functions of the energy, items and fluids on the right side of it, send or receive
If you want the space conveyor to transmit the items, the above items need to be configured to the space conveyor in the three options on the right. Here is an energy transmission as an example.
To build a transmission channel, you need to name it first. After named, you can add the channel
The increased channel can be seen in all space conveyors, so you need to configure the sending and receiving of this space conveyor separately
After selecting a channel, you can add the channel by clicking the two -way arrows of the left side to send or receiving the left side. A space conveyor can have multiple sending and output channels at the same time
Note: The remote transmission of fluid cannot cache in the space conveyor, and the transmission needs to be achieved by the fluid catheter
Electromagnet
The role of electromagnet is to absorb the items that fall on the ground
Shift+right -click can switch the electromagnet. The power consumption of the electromagnet depends only on the opening time, and the consumption speed is 1 μI/s
Travel scepter and travel anchor
The role of travel scepter and travel anchor is that it can shuttle in several places faster.
Holding a travel scepter Shift+Right -click to transmit a short distance to your cross -stars direction. The transmission distance will determine the energy consumed. At the same time, you can use the travel scenician to anchor and right -click, which allows you to transfer to the travel directly to the travelAbove the anchor
If you do n’t have a traveling track, you can also transmit them directly by travel anchor, but this is that you have to stand above a travel anchor, point to another travel anchor and press the Shift key
Returning the track and teleportation table
The function of the return rotor in some aspect is more powerful than the travel scepter. It can support farther transmission, but you need to synthesize the transmission platform before using the return scepter
The transmission platform cannot work alone. You have to place 9 transmitted stations into 3*3 multi -square structures
Shift+right -click can bind the backbone of the return scepter with the multi -party structure of the transmitted platform. At this time, when you are in other parts of the dimension, you can use long pressing shift+right -click to return to your binding teleportation table. This will consume you.200MB of the abyss dew and 1750000 μI electricity
The transmission table of multi -square block structure has a similar role in travel anchor, and it can also allow the travel scener to perform short -range transmission coordinate selection instruments and coordinate recorders
The coordinator selectioner and the coordinate recorder are combined with the teleportation table to make the transmitter can actively transmit tools.
To use the coordinate selection instrument, you need to prepare the original paper on your body, then right -click or shift+right -click a block to mark a coordinate (shift+right -click is the coordinate of the block you refer to, right -click to mark the block referred to the block referred to the block.The coordinates of the adjacent air cubes accused of being accused), and then record the coordinates on the paper, you can name this paper to indicate the coordinate point
Put this paper that labeled the coordinate point into the multi -square structure of the transmitted platform, you can put this coordinate label into the transmitted platform, and then you can stand on the teleportation platform and transmit it to the coordinate point, which will consume your certain energy (Consumption depends on the teleportation distance) and uses 50MB of abyss dew, but transmitting Taichung can only mark one coordinate point
If you want to send multiple coordinates of a transmitted table, you need to use the coordinate recorder. The coordinate recorder will find an effective transmission platform structure in front of the 7*7*7 range in front of the 7*7*7.You can store the marking coordinates into the coordinate recorder. At this time, you can use the coordinate recorder to achieve multiple record points. Pay attention to standing on the transmission platform during transmission.
Float
Floating rivers can allow you to get a floating buff
Shift+right -click on handheld floating wipes to perform anti -gravity floating, and again shift+right -click the effect disappear
Void box and void experience box
The role of the void box and the void experience box is to help you absorb the dropped items and experience.
The absorption range of the void box and the void experience box can be adjusted within the range of 0 ~ 6 cells
The void box can be filtered by the filter to filter the items absorbed by the filter. The void experience box must take the initiative to absorb the experience ball after marking a bucket of liquid.
Energy monitor
Energy monitor is divided into two ordinary energy monitor and graphical energy monitor
Energy monitor can actively connect energy pipes and redstone ducts.Show
These two machines can also monitor the total energy storage in the energy network. When the energy is in one range, the redstone signal can be sent through the redstone catheter or redstone line to achieve automated machine management
Pulse funnel
Pulse funnel can not directly transmit items like the original funnel. You have to right -click to open its GUI to configure
You can see that the pulse funnel has three rows of grooves. The function of the second row is the mark. Only when the input item in the first row is fully matched with the second row, the first row input slot willOutput a piece of item
6. Module configuration articles
See the original post, thank you
