No matter where you are, Baidu, MCBBS, Bilibili, MCMOD, or YouTube, you can always find countless AE2 tutorials for newcomers.

But have you ever been confused, how do you become an advanced AE2 player?

What should the ME controller be set?

——If there is a world unified method, then it must be this:

There are always advantages and disadvantages of various designs. Choose one that suits you best?

Ah, no.Actually, AE2 is a very delicate module.Many problems about it have a small number of extreme solutions.

Although the pursuit of optimal does not necessarily have any significance, you say that you are lazy to learn.But why don't you learn a very good solution directly?

However, there are many solutions for a few problems, and you still need to make a choice for the actual situation.

In any case, start your AE2 advanced journey!

Overview characteristics

To be good at AE2, the best way is naturally to carry the characteristics of the items.

But this is not simple.Therefore, it is recommended to replace it in another way: you can simply accept new features at any time.

However, although the features do not need to be memorized, you still need to be familiar with everything here.

ME network component

Divided into bus and machine.Please see items/blocks- [AE2] Application Energy 2.

They are not decorative.Open a network component GUI. If there is a card slot in the upper right corner, you can put the upgrade card.

There are buttons on the left, with your own text description, you can click to switch mode.There may be a new button after putting the upgrade card.In addition to the text description, you can also perform experiments yourself.

There are two types of items, one is a physical groove, similar to the items inside the box and the furnace, which can be put into the items.You can think that upgrading card slots and model slots are also regarded as such physical grooves.The physical slot also appears in many places such as the second line of the ME interface GUI, the list of the items of the ME terminal, and the model slot of the ME model terminal.

The other is ghost grooves, fake slots, and marking grooves.If you have nothing to put it in the items, you will find that the items on your hand have not disappeared, and there is an extra item in the slot (the quantity may be copied).Common in the first line of ME interface, storage bus, ME input and output bus, model editing of the model terminal, and other places.It is often used to mark items, so it is said to be a slot.

Practice question 1: Please analyze the "only write" and "read only" mode of the storage bus.

Exercise 2: Analyze the functions of other buttons of the storage bus.

Block and logistics

See Logistics System- [Forge] Minecraft Forge

Most of the logistics follow this rule.

Therefore, when you want to explore the automation solution of a container of a new module, you can try to stick a storage bus+one terminal to do experiments. In addition, fun, pipelines, or something are worth trying.

Practice question 1: Try to explore how to interact with each side of the ME box and the press.

Practice questions 2: The Items are added to the ME interface on the network with the default configuration, connected to the network with sufficient power and storage space. Will it stay at the cache warehouse (GUI second line) in the ME interface?Can the ME interface receive 10 sets of items popped up from the machine in 1Tick?

Network as a whole

A general situation is listed here, perhaps a little disappointment, but it is not a big deal.

Practice question 1: Use AE2 device to transfer the items in one box to another box, just like the EIO pipeline, and compare it with the EIO pipeline, list the more suitable use scenarios you make compared to the EIO pipeline.Essence

Exercise 2: Try to analyze the usage of the ME-IO port.

Network device update

Network device updates refer to network component work (such as input bus), or the content of the report (sender, drive, ME box, storage bus, ME terminal, etc.)

It is divided into two types, one is active update, and the other is passive update.

The active update is very simple, and it will refresh it every time.For example, enter the bus.But there is also a little particular here, such as how long is it updated?

Example 1: Check out the update time of the input bus.Ensure that there are enough storage space for the network. The input bus has no upgrade card. In the box, the box is covered with round stones.See how long the input bus is drawn, and the experiment will last at least half a minute from the beginning to the end, then set the empty box to repeat the experiment.

Since then, please see the network component update rate- [AE2] Application Energy 2 (Applied Energistics 2)

Consider passive updates.You may have found that entering the bus inserted into the redstone card to adjust to the pulse mode. Each redstone signal work immediately from nothing.This is the passive update of entering the bus in this mode.

Practice question 1: Please analyze the passive update of the destructive panel.

Exercise 2: A network has an empty drive, and a storage bus faces that driver, plus power supply and a terminal.Take the oak wooden board and 1K storage element containing oak wooden boards, first put the storage element from the terminal, observe the terminal, please do not exit the terminal.Then put in oak board.Please do experiments and try to understand.Channel path

Please do experiments, please ensure that the cable is the same color, the device is connected, and the power supply on the right side of the controller:

Interface intelligent cable intelligent cable intelligent cable

Controller Intelligent Cable Intelligent Cable Intelligent Cable

Observe the channels of the interface through the intelligent cable material.

Rotate the device and perform experiments to summarize its characteristics.

Supplementary exercises: summarize the situation of using MEP2P and quantum ring.

P2P

Actively actively (input end) of the storage bus of the A network to the P2P of the Internet B.The passive end (output) corresponding to the active end is a pile of boxes.With a network and power supply to the A network, test items from the terminal and view the inventory of each box for testing.

Replace it with a fluid logistics before experimenting.

Miscellaneous characteristics

In some examples, deepen the understanding of certain gameplay or characteristics.

Automatic synthetic item sequence

Template writing: wooden board, round stones, wooden board => everything can be.

Put the target container is the ME interface of the box A.Release a synthesis and view the content of A.

If you also bring plant magic, try to replace A with a compartment.

Spatial tower

What will happen after pulling down the lever?

Forbidden to set up baby 1. MEP2P

The analysis chart facing the player's ME-P2P natural channel path, compares and draw any circumstances that ME-P2P does not work, and then experiment and expand your theory for network without controller.

Forbidden to set doll 2-storage element

Can ordinary storage elements (referring to creation) can be installed with ordinary storage components?

Please summarize.

Winding state

Throw the last shadow pearl powder and the strange point together, and then use TNT to detonate.Pick up and view the strange point.

Synthetic card

If you do not use the automatic calling synthetic function of the synthetic card, please understand it in the following example.

Make a template for iron ore roasted iron ingots.There are iron ores and CPUs on the Internet. If you put the template, you can work to synthesize iron ingots.The output bus is facing a empty box, which is marked with iron ingots and puts a synthetic card.

After the experiment is completed, try add an additional point acceleration card to the output bus.

Finally, replace the output bus and box to the ME interface, which is marked with an appropriate amount of iron ingots and put the synthetic card as the upgrade of the interface.

Practical direction design

Advanced players, advanced players, advanced players ...

Anyway, take the extent of GTNH.

Channel planning?

To make up for

Molecular assembly room

analyze

How would you design the stacking scheme of the molecular assembly room?

The highest speed is to each ME interface facing the 6 molecular assembly rooms, and it is distributed at a ratio of 1: 6.

However, perhaps so much loss, a molecular assembly room works only when working in that ME interface.

In addition to speed, we also need to consider efficiency, that is, a molecular assembly room faces several ME interfaces.

Could this be too slow ...

Build

The two schemes can be combined: but ... this channel distribution may be wrong.We have three sub -schemes, one is to bypass the channel problem. One 16 equipment (the molecular assembly room does not require the channel):

Second, even before the channel's wiring is chaotic, it is available, but remember to make the acceleration card Shift Shift, right -click the molecular assembly room:

Please use the content explanation of some of the channels in the channel to explain why the channel is stable allocation.

The third is to require the main use of P2P wiring to strictly control the road length of the channel (the size of the 4*4 can be expanded and the length is 16).

Complete the model production in the model terminal and put the template from the interface terminal.

Please place the synthetic table chaotic and disorderly. Do not play the functions and boxes in the same ME interface. You can call the molecular assembly room around the two interfaces at the same time to achieve higher synthetic efficiency at the same time.

If you feel that a certain synthetic table is very large and the speed is not enough, you can copy several templates to scattered in several ME interfaces to realize the molecular assembly room around multiple ME interfaces for this synthesis.

The number of template items automatically supplement device

Introduce

The materials in your home are piled up in a mountain, but you often run out of the box of the network accidentally. After clicking the Jei additional number, it is found that there is no box in the middle of the synthetic terminal.Find the synthetic table of that machine.

Or you want to use the cable immediately, but there is no cable at home, and you need to order another automatic synthesis.

This is too annoying.

Plan 1

The most natural method is to send the number of items of the letter to the output bus.The built -in synthetic card and redstone card of the output bus make the sender control, and the adjustment mode is only used by using synthetic items.Mark items, output the finished product to a box, and then recover the finished product from another input bus that has been operating.

Simulation: When the items are insufficient, the output bus work, the release of synthesis, output finished products, and finished product recycling.Repeat until the items are sufficient, the sender changes, and the output bus stops running.

However, items are released one by one.Therefore, it is recommended to use the acceleration card to use.Plan 2

The output bus plug -in card & acceleration card, the mode is arbitrary, analyzes+select by itself.

The storage bus is raised priority.

Expand the array by yourself.

Plan 3

Applicable to a small amount of situations.

The storage bus is normal, the interface is interspersed into a card, marking the items and quantities you want.Expand the array by yourself.

CPU planning

Characteristic explanation

See automatic synthesis- [AE2] Application Energy 2 (Applied Energistics 2),

Design

As shown in the figure, the first line is the CPU for automatic maintenance. The number of parallels is adjusted by itself.

The second line is the CPU used manually, which decreases in parallel from left to right, but the reduction is not much, all of which are very fast and acceptable materials.In this way, the CPU with a small capacity is given priority.The right on the far right is designed very large, considering staged giant synthesis, this CPU design is almost the same.

Simple amount of items in the template

The parallel processing unit can increase the frequency of hair distribution materials.Maybe not enough?So why not move the template?Maybe a bit extreme, anyway, this means right.

Automation analysis from the main network

The main network only cares about whether he has thrown items and whether he gets items.

The figure below is a sample of the smelting furnace refining ore: In order to ensure the simple tutorial, there will be many discussions like in the picture, that is, there is no main network, or the main network will show a head.

Crystal birth

Remember to supply power.If you want to comply with Fulux Crystal, it is also marked with Faru Ix Crystal underneath.

Crystal birth warehouse

From AE2Stuff.Remember to write a template like the optimization scheme mentioned earlier.

Printed processor

We will need a lot of printeds to work together for high -speed pressing.

How can we easily achieve this goal?

The acceleration card must be full, and the template must be used.

Quantity allocation

Please allocate by yourself.Several examples are given here, please analyze rationality yourself and make a solution that suits you:

Example 1: 1 logic, 1 operation, 1 project, 1 silicon, 1 total

Example 2: 1 logic, 1 operation, 1 project, 3 silicon, 3 total

Example 3: K logic, K operation, K engineering, 2K silicon, 2K total

Example 4: 2K logic, K operation, K engineering, 3K silicon, 3K total

Logistics design

It is recommended to use ... Maybe you have done such a device connected on the main network: Automatic synthesis-the first picture and then you have no gold, only logic processor.

However, we can modify it to make a separate network and receive materials from the main network.But if you need multiple printers to collaborate, you may need to prepare a little red stone and silicon plate in this network.

In short, the synthetic table of the processor is unchanged for thousands of years. Generally speaking, the printer is doing this. It seems that the magic reform of the printer is very unpopular.Use the output bus to mark the items.

For example, see the figure below.

High -grade printer

Is there any difference (

The machine uses "protocol"

You can make a "protocol" for automation, just follow the synthetic table.

For example, the above -mentioned pressure printed protocol is: 3 materials are 3 materials, and the finished product is a processor.

Some Longyan aggregation protocols can be: if it is placed in the middle, please mark it in the automation device.

Some Longyan aggregation protocols are: each time can only be published in synthesis, it is not possible. When synthesis is performed, a new synthesis is not allowed.

There is also a little Longye aggregation agreement: Please put it in the middle of items in the middle of the template, and put an extra round stone in the template.

Some rested alchemy automation protocols can be said: Please name the Ember that is to be placed in the base according to a certain format.

Ideal template

As mentioned in the previous section, some devices "protocol" is to mark the items into the automation device.

But players need to run around ... so it doesn't seem to be ideal.

Some "protocols" are only allowed to publish a single synthesis, and some agreements are not allowed to handle unit processing units.

This is all disgusting users.

The "protocol" of the ideal template first requires that the synthesis can be performed perfectly in any synthetic release after the template is added.

In addition, players are required to add templates where any facilities are perfect.

The facilities are perfectly referred to: the main network items are complete, there is a model terminal that connects the main network and the interface terminal connecting the main network.Of course, if you need a fluid terminal, ME box, component workbench and terminal connecting other networks, it is not impossible.

Single item synthesis

This is a ME interface.

We put in the template inside, put the box next to it, and then remove the items from the box to complete the slightly complicated synthesis. For example, the smelting furnace is merged into a ingot, and the work is to let the press work.

This is a blocking mode.Make the ME interface only go to the target container when there is no items in the target container.Maybe it can be used to ensure the automation of the empty barrel water through the transmitter.

Develop plant magic and start your automation journey.When the synthesis of the magic deeds, it is often allowed to wait for the last synthesis before allowing the next synthesis to be fried.Moreover, no items can be directly distributed to the altar, and they need to be thrown out through forming panels, flower boxes, and throws.Therefore, you want to combine the two above: first send the items to the box, then remove the items from the box, and the interface opens the blocking mode.Then, you find that this is no different from the non -opening blocking mode:

Single material separation-1st picture

Obviously, if you think about it with your toes, you can also think of the reason for the blocking mode. Just look at the box and does not look at the altar:

The items enter the altar, the box is naturally empty.The box is instantly empty, and the next material is naturally available.The next material comes instantly, and the items will enter the altar again.The next item enters the altar, and it is naturally fried.

Automatic player remaining options:

Option 1: The interface of the main network is a bad person.Before drawing the item, interrupt the main network cast, disconnect the trigger bus connected to the template interface and the main network body.Until the synthesis is completed, it is connected again.

Option 2: No matter how bad, if the object of the crime is not, it will not work.Let you give the box directly to Lu Da, and even the box moves away to the altar.Throw the empty box back when the synthesis is completed.

Options 3: As long as the interface is bad, as long as it doesn't matter.The altar is still synthetic for a day, and it will not pump the boxes in the day.

Option 4: Let him lose the tools of the crime.Write one in the template materials and finished products: the voucher for the crime, and then there is only one voucher in the entire main network.When we finish the synthesis, return this voucher to the main network to send the next material.Of course, there are many ways to write templates.

Options 5: Let this bad guy control, automated users only send a synthetic task once a time.

Option 6: As long as he is not satisfied with the next crime conditions.Except for materials, the blocking mode is also a condition.Using this condition, we leave an unimportant item in the box that receives items. After the synthesis is over, we call it a synthetic placement symbol.

Calm analysis

Option 2: It's not good to be more or less, it is a square update and a box control, tedious and inefficient (refers to the CPU)

Options 5: This is too aggrieved to be used.

Options 1: No, the synthesis cannot be released at all when the interface is disconnected. It is not allowed to be uncomfortable with the synthesis of water runes and style runes. It also involves the channel update of the main network.

Remaining options: 3, 4, and 6 are almost the same as 4 for 4.And 4 There are various restrictions, such as "only one certificate in the main network", and this voucher plays the role of a "catalyst", which is a bit particular about template writing.

In comparison, 4 is inferior to 6, so exclude.

3 and 6 have advantages and disadvantages:

6 The extraction symbol of the extraction is a pulse -type signal, which detects the signal of the finished product.Suitable for the inconvenience of planting magic to directly detect whether the altar is at work and it is easy to discover the finished product.

The "allowing the next synthesis" of 3 is a continuous signal.For example, if you planted the altar or Longyan aggregation, you can easily detect several items inside the entire device, thereby obtaining whether this information is synthetic.

The signal of the two requires the lock memory/upper edge detector/redstone card pulse mode to convert, so please choose it by yourself.However, in the subsequent multi-raw material distribution-pseudo-combination, we will exclude solution 3 because it has two materials outside at the same time, resulting in a certain degree of inconvenience.

Beginning (occupying a position) is just a template that can be applied.Please build real automation on this basis.

Note that when taking items from the material cache area, retain the placement symbol.

In addition, use the box to receive items, and then use the ME pipeline mobile item, which can be simplified to receive items with interfaces, but it is guaranteed that this interface is not connected to the interface of the main network.

Start to manufacture (not smoking materials)

The relay derives the redstone signal input.Enter the bus inserted into the red stone card to be controlled.Please update the redstone signal before the input bus can draw the next material.

If the input bus+box is replaced with the interface and placed at the box, please replace the trigger bus at the input bus and ensure that there is no delay from "input bus work" to "trigger bus disconnection"!] Yes, 1Tick is best.

More examples

AE2 automated Longyan aggregation, mysterious magic injection, planting magic runes, Tyra steel ingots, original refining medicine- [AE2] Application Energistics 2 -MC Encyclopedia | The largest MINECRAFT Chinese Mod Encyclopedia (mcmod.cn)

Single material separation- [AE2] Application Energistics 2 -MC Encyclopedia | The largest MINECRAFT Chinese MOD (MCMOD.CN)

Information and real thing

Pseudo -synthesis

Multi -raw material distribution 1: pseudo -co -forming plan

Multi -raw material distribution 2: packing machine solution

Packing machine