This tutorial is set by the author's setting without permission.
Before making the distillation tower, we have to clearly clear the source of stainless steel.In the early GT6U, chromium iron ore can also be thrown directly into the chromium, but now the chromium iron ore can only electrize chromium, manganese and nickel, but the distilled tower requires a lot of stainless steel.Is there a poor by -yield to make stainless steel? Most tutorials are said, but if we think about it, can we increase the production of stainless steel after the distillation tower is out?Born: Make a small gas turbine (steel), which has an output of 64RU/T. Of course, the steam turbine is also available, but it is recommended to be a small gas turbine and then make a LV -level generator.It is far away, but it can be made now. It only needs galvanized steel, and the efficiency of 68.75%makes it output of 44EU/T.Finally, make an electrolytic (LV), which is even cheaper than the generator. This set of devices can provide the actual output power of 44EU/T to the generator, and the electrolytic of chromium iron ore requires 42Gu/T. It is just right.The whole set of device is very cheap and can be done with steel.
(1) The device in the middle can also be treated with silicon -magnesium nickel ore. In addition to leisure, you can also electrolyze some water to obtain oxygen supply to the baked furnace to further increase the production of nickels, and handle water generated by small gas turbine.Anyway, natural gas does not need money, it doesn't hurt to burn.
The heating of the bronze burning chamber in the early stage is very slow. You can choose to use a fluidized bed burning room.But I recommend another method here: I believe you have found a lot of relics in the process of looking for a mine, or you find that the door transmits the door when mining like me, and the eyes of the last shadow are saved.Get some chromium powder, the smelting temperature of chromium is 2180k, and the ceramic is enough. The chromium combustion room has 85%efficiency and the output of 112Hu/T.It can be seen that a chromium combustion room can significantly improve the heating efficiency. Note that the chromium combustion chamber requires a level 3 wrench to remove it, so you think about the position before placing.As for the choice of the burning room, if there is a natural gas spring, choose a liquid/gas burning room, and use the liquid/solid burning room without it.The recipes of the gas combustion room and the liquid burning room are combustible flow, so the liquid burning room can burn natural gas (doubt). I play a fake GT? QWQ anyway, natural gas does not need money, and it does not hurt.
If chromium → → is too difficult, you can choose to make a meteorite with chromium mold. Of course, meteoritic steel can also be directly meteorite mold.Note that if you use chromium molds, you need to drop the temperature to 2725K before exporting.
The quality of the 加 is very large, heating and difficulty, so it is necessary to upgrade the 坩埚 as soon as possible. It is recommended here, because the 钽 system is easy, and the mine vein is not rare.The electrolytic of 12 Iron Mine requires the actual input power of 126EU/T. The electrolytic machine of the LV class is obviously not competent. Although the MV -level electrolytic machine meets the power requirements, it requires aluminum.You can make it.HV -level electrolytic input requirements 256 ~ 1024EU/T.Therefore, we need to make a HV -level generator. It requires stainless steel. Because it needs to be magnetized steel rod, we must first make an electromagnet and electromagnetic polarizer.The input of 256 ~ 1024RU/T requires us to choose a small gas turbine at the level of titanium (256)/tungsten (512)/tungsten steel (512)/铱 (1024).So the input limit of the input limit of the small gas turbine (铱) to 1024RU/T.This device has the actual output power of 704EU/T, which can solve 99%of minerals.
At this time, the high -temperature mixer (steel) can also be produced at this time, tungsten can also be made, and Yingang or the above -level level of molds and tungsten carbide molds will be made as soon as possible to improve life.Because the low thermal capacity mold requires 16HU/T and the tungsten carbide mold requires 96HU/T, Yingang's moder (128HU/T) can be pressed.After upgrading the tungsten cymbal, you can upgrade the carbonized cricket through the by -yield of the stone green/heterosexual stone/vermiculite.At the same time, it can be used before the distillation tower, and the output of manganese can also be improved.
All the formulas in NEI use GU as a unit. This is a nominal energy that does not exist in the game. The conversion of it and other energy is 1: 1.You can also understand the GU as the amount of energy. The 1GU's energy except the SU is equal to 1 in terms of value.Thank you for reminding SU questions qwq, 1gu = 2Su
There is something that cannot be opened in GT: the mysterious anvil.The small side of the avil is close to the small side of "NEI", and the large side of the avil is away from the small side of "NEI".As for the large side of the anvil ..... separates the large side of the anvil along the middle, part of the "NEI" is small, and part of the "NEI" is large.When the anvil is used to D: 1, you can throw it into a new anvil. There are pressure molds to use the pressure mold.
Some tips: GT adds a melting furnace that uses HU, which is 100 times better than the original melting furnace.The grass rope added by GT is 100 times better than the original ladder.The box added by GT is 100 times better than the original box.The high -end workbench added by GT is 100 times better than the original workbench.The lathe is a good thing.Cover the pipeline to avoid burns, because this changes its collision box.When a unilateral block machine has some problems (such as the data error caused by the stutter) machine, the ID and texture of the machine will change, and the texture will become a red yellow edge. At this time, the machine cannot be used normally, and the pipeline cannot be connected.It cannot be exported/imported items. At this time, you only need to dig down the machine and then place it. Although the ID change, the mining will still drop the original block, and the internal items will fall normally. However, it is still recommended to backup at any time.
By querying NEI, you can understand that there is a formula for liquid metal → mixer → liquid alloy, which means that it is feasible to use the mixing mechanism to make alloys, but don't think about it, you can use nickel chromium alloy to make stainless steel.But it does not have enough advantages to replace automatic 坩埚, so depending on personal preferences.The right -click mold installed with a liquid can be exported. After setting the automatic output, it can automatically output to the mold directly below.Most of the temperature of the liquid in the barrel is the melting point of the substance, but when it is exported to the mold, it still cannot be solidified in seconds. It takes 1 to 2 seconds, so the funnel efficiency is not high. Pay attention to the temperature and anticorrosion.(As for the export of pipes .. I can use a small steel fluid pipeline to test it when testing)
