This tutorial is set by the author's setting without permission.

Power source and materials

Before that, there must be a stable source of power, such as: Water Wheel (not recommended) |Windmill Bearing

Next you need:

Wrench*1 crushing wheel*2 wind turmoil*2 speed controller*4 large gear*4 brass case (decoration)

Power Roller Compressor*Vertical Cross Gear Box Cross Gear Box Transmission Strip Porter Belt

Power Roller Compressor Working Basin Filter Anshan Leak Fun Tounito Bonwood Bun Bonald Tunnel

Plattering table chain transmission box

Crush minerals and transportation

Here I use the maximum power windmill to control the speed of the transmission belt through the speed controller, and the speed controller outside is used to control the speed of the crushing wheel.

If you think your crushed wheel speed is too fast or too slow, you can adjust it through the speed controller

The transmission belt behind the crushing wheel is used to send the mineral over for crushing

The two on the transmission belt are cross gear boxes, which can just control the two bifurned transmission bands

One more processed mineral is extended (vertical) transmission belt, and the processing line plus one (horizontal)

Pictures as a reference function

Put the brass tunnel like this, and the outside can be used as non -processing minerals.You can use brass or Anshan case to decorate the transmission belt

Put the mineral you want to automate in the filter,

On the left is items that can only be matched in the list and match the attributes

Only on the right is prohibited from the items that match in the list and match the attributes

Place the filter to the specified position (with the picture)

↓↓↓

———————————————

The crushed mineral marked at the exit, here I only use gold, iron ‘copper, zinc to be used as columns.

If you still have other MOD minerals, you can use Jei to see it is not in the formula.

Otherwise, it will become air directly

One more processed minerals and the transmission band, add one to the processing line

Make memory here, I use drawer mod, if you use large mining machines.The original version of the wooden barrel (box) cannot stand it

Because it is full of fast, and then it will block the back things,

It is recommended to produce one at a time to avoid blocking and waste efficiency.

(The picture is for reference only)

Washing device

Make water washing, and put water in front of the virgin.

The water washing length is determined by itself, which can extend the efficiency of water washing and improvement

Just connect a chain gear box, and then configure the speed controller extra

Make a storage box in front, I still use drawers.

Because a group of ore can produce at least two groups of crushing ore, a group of crushing ore can burst at least two groups.

(If you are lucky, it is really cool)

(Behind the wind turbine, the outer transmission strap connected behind the cross gear box, let the rotor rotor, let it be mentioned below)

If you find that your wind drum machine suck it inside, you may wish to adjust the speed controller to negative number

Don't worry about others, because this speed controller is only responsible for a blower

Press shift and right -click to accurately reach individual digits

See only grains to get in

Ingot treatment

After it is adjusted to 9 grains at one time, then you can ignore it.

If you love one by one, change it to 1

No need to mark anything, you can put the particles up, anyway, it is not consumed

Behind the wind turbine, a cross gear box.Then put the rotor to the wall to extend the wall. It is recommended to use the Anshan case to wrap the rod to extend.

Put a chain rotor at the end of the rotor rod, and then connect to the large gear and speed controller

Then put the working basin and power roller.Just connect the power roller prescription machine

You can adjust the speed of the roller by the speed controller

It is indicated that only the ingot can be completed, as long as you put the box at the end

If you look like, you can use a wrench to connect the funnel. If you have obsessive -compulsive disorder, you can change the Anshan on the side of the box to brass

You can quickly know what this box is in this box.

Attachment

The tutorial provides a reference role, and it is more improved by the manufacturer

Blueprint and how to use

Click to download the blueprint

Point → How to use the blueprint?