This tutorial is set by the author's setting without permission.

In this tutorial, I will share some of my personal skills in the development of GT5, which has a little promotion role in development.Sorting is random, not in the order of development.Some of the personal opinions are welcome to point out if there are mistakes.These techniques are divided into several categories, one is obtained at 5.09.31, one is obtained at 5.09.33.02, and the other is obtained in conjunction with other modules.The content part under a specific version is not applicable to other versions, but it still has reference value, and sometimes I specifically indicate.

Part of the content comes from OLD_MEMORY.Thank you here.

Have some nonsense

0. (General) Archive must be backup!If you have a little careless use of GT, you will have various serious problems (machine explosion, blast furnaces, etc.), so be sure to back up archives and beware of bombing files!

0.1. Don't be confused when playing. When your blast furnace or something is running slowly, you may wish to think about what else can be done, don't run around at home.

0.2. As we all know, playing GT must do things in a batch in a batch, so that the things you have to do have not changed, but the number of things has decreased. The merger is in a batch of batch, which is not only promoting development and worry -free.Such as machine shell, motor, circuit board.

GT5.09.31:

1. If you look closely, you will find that the same number of patch circuit components (the resistance, capacitance, crystal tube, diode) of the same number of patch are more than ordinary circuit component consumables, so you may wish to use all circuits in the circuit assembly machine to use all circuits.Patch parts -as long as you have the ability to make them.The only disadvantage is that there are more consumption, but the by -production by the centrifugal aluminum ore in a high -pressure or above crusher is a powder, which will not be missing.

1.1. There are 3 types of wafers. Ordinary, fluorite doped and silicon rock doped.Ordinary wafers can be carved, fluorite doped wafers can engrave four times the amount, silicon rock doped wafers can engrave eight times;Silicon rock doped wafers can engrave four times the amount.It is recommended to use as advanced wafers as possible.

2. (at least not applicable to GT5.09.33.02) How to come in the first batch of polyethylene?First of all, look at ethylene, take the petrochemical route, and use oil sand (or from the BC oil field) crude oil processing. The most output method should be distilled to sulfur -containing fuel -containing fuel and then desulfurization.The average output of crude oil per barrel is 200MB of ethylene.Then there is polyethylene polyethylene. It is recommended to use oxygen without air, increase production by 50%.If you want to match the flat, the minimum amount of flattening is 60 barrels of crude oil processing as 12 barrels of ethylene. After it is installed into a unit, ethylene per unit consumes 7000MB of oxygen polymerization 1500MB polyethylene.(125*144MB).

3. It is inevitable to cache energy in power supply.In the middle of the MV to HV, cache fuel (methane, benzene, light fuel, high sixteen, etc.) is better than using batteries.If the cache fuel, the cache cost is low (storage tank, or the cache of the pipeline directly in GT), the fuel conveyor is non -destructive; if the cache power, the cache is more expensive (battery and battery), and the loss in the transmission is also large.Therefore, cache fuel can make you more simple cache, and the layout of the machine can be more free (no need to consider line loss).Of course, battery deposit can be used in part, and it must be used flexibly here.However, cache and transportation of fuel means that it is necessary to equip a generator at each "terminal", but it is not expensive, isn't it?

4. Multi -party machines may fail during operation. If your power supply just meets the demand, the multi -block machine will jump power as soon as it fails (one failure will increase the power consumption rate by 10%), so you can give the machine a rich surplusPower supply.Of course, the automatic maintenance warehouse can ignore this in the later period.

5. I feel that the sound of the machine is very annoying and turn off the sound of the block.Maybe your patience is slowly disappearing in these noise.

6. GT is originally a module focusing on difficulties, so it is recommended not to add some very damaged modules (accelerate the torch, equivalent exchanges, etc., MEK is also a bit a bit).Playing GT plus equivalence, it is better not to play

7. Corresponding flame flour can get black ashes and sulfur powder, centrifugal black ashes can get ashes and carbon powder, and centrifugal ashes can get something such as calcium, potassium and magnesium.So a flame man brushing the monster tower allows you to obtain flame sticks, flame powder, and sulfuric calcium, calcium, potassium magnesium ...There are some uses, such as magnesium can participate in chemical industry, and flame powder is more useful.

8. The ruby ​​mines in the vein of the redstone can produce a lot of chromium, but it will also dig a large large amount of redstone.Redstone cannot be eaten as a meal, but it can be centrifugal.In the case of large -scale mining machines, 10 redstone is produced in each red stone mine, and 1 silicon powder, 5 yellow iron ore powder, 1 ruby ​​powder and 3 barrels of mercury are centrifuged.Silicon is mainly used to burn single crystal silicon (however, there is in the sand). Each 2 pyrite powder can be used to use soil blast furnaces or industrial blast furnaces to burn into 3 iron (so each echolga ore can be issued on averageThe module is the highest)) Send a little bit of chromium by sending it out, and mercury can be used to immerse ore.

9. It is recommended to upgrade the blast furnace coil as soon as possible. The higher coil with higher furnace temperature can reduce power consumption and allow you to enjoy non -destructive overclocking.See this tutorial for details.10. The plastic substrate required for integrated circuit can be made of polyethylene, polyvinyl chloride or polytrafluoroethylene.It is first recommended to use polyvinyl chloride.

11. It is recommended to leave a multi -block mining place as soon as possible to liberate the hands and increase production.If you are not rare or too lazy to move the large mining machines, you can also use a unilateral miner.

12. It is also recommended to produce a large and anti -overclocking, which is worth having.There are also many large -scale anti -exclusive formulas (ordinary anti -anti -do), such as adding titanium polymer formulas, and oxygen can be used with oxygen to make ethylene/ethyl chloride/tetrafluoroethylene ... convergence into two times the product.

13. What materials are better for the preliminary production tools?In fact, if you want to be short -durable tools, you can use manganese or cobalt instead.If Metallurgical 4 is added, you can use Malaysian steel. If there is no deficiency in platinum, you can also use ghost poison crystals.Of course, you can change electric tools.

GT5.09.33.02:

14. Multi -square machine processing When the different raw materials participating in different formulas in the input warehouse/input bus seem to be in a certain sequence.Use the distillation tower to measure it, and place the four input warehouses in the four corners of the bottom layer. If you put BC crude oil in the four input warehouses, the crude oil in each input warehouse will be evenly distilled after booting it with a soft hammer.The crude oil in the input warehouse is almost exhausted at the same time; if four different crude oil is placed in the four warehouses, whether the main square of the distilled tower faces south or north, it will be processed in order of the input position position in the northwest-southwest-northeast-southeast.Among them, the crude oil (the raw materials in the input warehouse with high priority are not enough to process at one time, and the raw materials in the low priority warehouse will be processed). When the distilled tower enters the raw material in the input warehouse with a low priority level, if the high priority is high, the priority is high.There is another raw material in the input warehouse, so the distillation tower will temporarily put down the current processing formula, and first go to process the raw materials in the high -level high -level warehouse.I didn't do more tests (lazy), but I can provide you with an idea.For example, if you lack stainless steel, you want to make a distilled tower as a crude oil and cracking light fuel/cracking heavy fuel/cracking oil/crack oil gas processing at the same time.It will keep processing crude oil, causing cracking things to overflow; if you place the input warehouse of the cracking things in a high priority level, the cracking thing will be distilled and spin -up, so as long as it isAdding a cache between the oil crack and the distilled tower will not overflow the cracking things.By the way, the oil cracks will continue to process when the output warehouse is over, and the extra products will swallow directly.

15. In the middle and late stages, you can use SOC and ASOC to make circuit boards, saving a lot of trouble.

16. EV ~ IV is strongly recommended to set up a strong cold nuclear reactor. The power generation is very sufficient, and it can also obtain 钚, 镥, and super -energy silicon rock.

17. The UU machine in GT5 is a relatively picked gadget.But it is good to copy 锇 and 是.There is also a more brain -open effect. Copy 氦, 4MBUU material has a bucket of sorbe, and it is used for etching crystal chip.

Under more mod:

18. GT generally needs to cooperate with some logistics modules to play. Needless to say, AE2 (Application Energy). Individuals are here to highly recommend EIO (last shadow interface). The pipelines inside are very powerful. Many times, it can greatly simplify your production line.

-GT ++ area:

19. The official version of the GT ++ is a semi-finished product. It is recommended to test or backup archives before manufacturing and using machines.

19. GT ++ has a thing called fishing person who can automatically fish, and can also catch diamonds, emeralds, sand, bones, mucus balls, ink sacs and the like.Put a pile of fishing people and take the fish they get to centrifug into methane to generate electricity to form a permanent motivation (Bushi).Efficiency is okay, but it cannot be seen in HV, unless it is paved with hundreds of fish.Persevere in those who have the motivation for permanent power generation can try.

20. Large processing plants and large -scale automatic assembly machines in GT ++ can be made in the EV era. Large -scale automatic assembly machines can act as circuit assembly and assembly machines, saving IV, LUV, ZPM, UV circuit assembly machineThe material of the material, the large processing factory is adjusted into the optical carved machine mode to save the material of LUV, ZPM optical carved machine (in addition, the large processing plant of LUV is very horrible).In addition, in the GT ++ version 1.7.02.09, a large -scale automatic installation was not consumed and may not be completed.

21. GT ++ Multi -square block machines are fast, suitable for overclocking, and some have additional production, such as crusher and screening machine.If you can do it, try it.

22. GT ++ adds a battery called GT computer host, IV level, cost -friendly (the same power storage is much better than the Langpoton series), and one can save 2,147,483,647EU, which can be used for a long time.