3.0 update brings more humane and easy -to -understand UI, and the tutorial is not needed to continue updating.Touched
(This UI should use everyone ... right)
In the 2.0 update, the author will deepen the firearm accessories system that was originally highly customized. This part requires a large number of basic firearms knowledge (the author probably want to do the MC version to escape Takov), but now uses a little use of simple basic accessories.illustrate.
The first is to enter the assembly mode, the default is the "M" key, and the ATTACTMENT MODE is in the settings.
MOD's default keyboard is adjusted separately in this mode:
The upper is an assembly sight, the lower guide rail accessories, the right Shift key is to assemble tactical laser, and the left is an assembly muzzle accessory, and the right is assembled firearm skin.
General accessories generally have grooves, which means that it can match all the firearms with the corresponding guide rail.
This is a PUBG player who will never be unfamiliar. We can see that his position with a guide rail is the top of the case, the side and below of the wooden guard, which means that most of the accessories in the MOD can be used.
It's like this
The muzzle accessories are to correspond to the corresponding bullet caliber. Bullet diameter is not a game like PUBG to simplify the game process to simplify the use of the caliber to identify it.X45mm.
And some weapon accessories are exclusive. This part can only be judged or tried slowly by its own firearms knowledge. Of course, I will try to make up in wiki.
Next is an advanced tutorial.
In the new MW, you can see that the author's ambition is very large. At present, the Beta version is not perfect, but many guns have made advance modification models.Next I use the familiar AK47!To explain.
(The following sections are popular science content, you can skip. But if you read it, it helps you to find the right accessories)
AK47, in the early years, did not say that there were many concepts of modular design. Master Karashnikov did not take into account this when designing. The design now seems to be slightly old, and it is impossible to adapt to adaptation.Little Burchoya's accessories.Just like the picture below.PUBG players may notice why PUBG's AKM can be installed with a sight, and it is also possible to notice what the dust cover is less. In fact, there is less.It is Picatini guide rail, referred to as leather, and basically most accessories can be installed on the leather.The concept of the universal interface of the accessories is formed at the end of the Cold War, and the AK47 will naturally have this concept in 47 years. However, for the Soviet weapon, there is also a need for the need for mirrors.The interface, we generally call it a sloppy trough, is also the interface of the PSO-1 sight used by the SVD Dragon Nonov sniper rifle. You can see that there is something called a mirror bridge.Because there are accessories that can be installed with a fixed mirror bridge on the case, you can use a PSO optical sight.
Similarly, if you see a sight with a mirror bridge, you can usually apply most of the guns produced with the former Soviet Union.
These are the keys that will be used in the tutorial.
Enter the assembly mode, the default button is M.
The firearms are viewed. The default button is P, which can be entered into the advanced assembly mode in the basic assembly mode.
Change the sight of the sight, the default button is the "↑" (up) under the arrow key, and in the advanced assembly mode, to change the upper case/dust cover/upper case guide rail.
Change the lower guide rail accessories, the default button is "↓" (double) under the arrow keys, and in the advanced assembly mode, it is to change the front -end guide rail/protective wood.
Change the inlet accessories, the default button is the "←" (left) under the arrow key, and in the advanced assembly mode, it is to change the front guide rail/barrel attachment.
Change the skin of the firearm, the default button is the "→" (Right) under the arrow key, and in the advanced assembly mode, the removable gun holder is changed.
Change the laser accessories, the default button is the right Shift key (RSHIFT), and in the advanced assembly mode, the gun body/pistol grip/integrated gun/magazine conversion kit is changed.
Change the quasi -mind (limited to the advanced assembly mode), and the default button is the period of the period "." (Period).
What is an integrated gun?What are the wood -protection and removable gun?What is the lower box?These are the names of the accessories of firearms, and I will explain in the tutorial.The modified parts designed here are only commonly used in firearms. Some firearms will have different key combinations due to the differences between accessories.
Notice!It is very important. Before starting the firearm, we need to remove the magazine, remove all the accessories in the basic assembly mode, and then remove it before disassembling.Because if the existing accessories are associated with the accessories that need to be replaced, it will not be able to replace the modified accessories normally.Some accessories need to be front accessories, and the front accessories need to be installed before installing this accessory.
Now returning to our AK47, in fact, this is an AKM. There is no slot that can be installed with a mirror bridge. What should we do? Let's enter the assembly mode first.
At this time, AKM cannot be equipped with common sights. At this time, it is necessary to transform him. This is our advanced content.Next, we have to carry out Multi-PARTY GOVERNANCE.First, press the weapon viewing key (default believe P) in the basic assembly mode to enter the advanced assembly mode.
The interface after entering is like this (this is the test version interface, it has not been fully completed.), Then at this time we can further transform the firearms.
First press the sight of the sight (default as the direction key "↑", UP) in this state. We can remove the dust cover of the case.We generally call it a case that contains the main firearms operation mechanism, and some firearms are divided into upper and lower cases.
Then press the skin modification key (the default is the direction key "→", Right) to remove the butt. At this time, we get AK that Uncle Africa is often used to shoot!The gun here is not an integrated gun with the gun body. We can see that there is no great impact on the overall structure after disassembly.
Then let's find some of the accessories of Little Burchoya and change the underwriting of the lower guide rail accessories (the default is the arrow key "↓", DOWN) to replace the wood protection.Then install the dust cover and the buttock back.You can see that there are rails under the below and above the case at this time, so you can equip leather accessories.
Then press P to exit the advanced modification mode to install accessories for AK47.
At this moment, a magic AKM can be used at will!
AR's rifle has a high degree of modularity, even if people who are not familiar with the firearms have a certain FPS game experience, they can see a variety of rifles improved or derived from AR in various games (although most people who are not familiar withIt is directly called M4), and then I take a classic Old School M4A1 to make a modification explanation.
Many people must be familiar with this classic M4. Now we can see that there is no guide rail in the protector. What should we do in this case?Enter the transformation interface like the transformation just now, and before that, all accessories need to be disassembled first.
Notice!An important thing is to talk about it again. Before starting the firearm, we need to remove the magazine, remove all the accessories in the basic assembly mode, and then remove it before.Because if the existing accessories are associated with the accessories that need to be replaced, it will not be able to replace the modified accessories normally.
After entering the advanced assembly mode according to P, we can press "."Wait, then we can install the classic four -track KAC wood protection, and then install the quasi -star. At this moment, the M4A1 has also appeared in many games. The model is M4A1 SOPMOD BLOCK.The mechanical sight is composed of quasi -minds before and after, forming two points and one line to help aiming. If you want to know the principle, you can search for the Lenalian phenomenon sight.
The current M4A1 default is a 14.5 -inch barrel, so we can assemble the M4 to protect the wood, because the Lvoa wood protection has covered the M4A1 air guide position. At this time, there is no way to go back to the quasi -star.
Then at this time we can transform the firearms according to the renovation method just now.According to the way to change the AK dust cover introduced above, we can also change the upper case of the M4A1. Unlike the AK weapon, the case of the AR -series weapons is also one of the important components of firearms. Therefore, we cannot remove it alone.EssenceNo different upper cases have been found to the weapon.
Do Takov players feel familiar? WWW, 416 has not yet been updated to the new version, so I changed a M4 according to the full match 416 (
In the new version, the in -depth transformation of VMW has increased another step. You can change the caliber of the firearm through high modular accessories. At this time, we return to the M4 that is just the same state.Refer to AK above.
Then installation, at this time we got the AR57 with the P90 5.7mm bullet. It should be noted that the M4 is the classic upper and lower case structure.Therefore, we must not remove the upper case alone like AK. We need to put it in the backpack in the backpack first, and then modify it.At this moment, the AR57 accessories burn money players should be familiar.
The short sword also has a corresponding 5.56 renovation kit, here to demonstrate.
Similarly, the pistol can be further modified by installing the guide rail. This guide rail is attached to the guide rail under the pistol. Pay attention to whether the pistol has a lower guide rail, otherwise it cannot be installed.
The guide rail cannot be removed after installing the sight.Limited by the length of the guide rail, this guide can only be installed on a relatively small RMR red dot.
At present, the attribute bonuses that accessories can be given are very small. Only the muffler and the front grip can give a more obvious rear seat reduction and exemption. I feedback to the author's hopes to increase the difference in the attributes of the accessories to increase the diversification.Note (.
At present, VMW is still being improved, and the tutorial will be further updated.
