This tutorial is set by the author's setting without permission.

The core item of this MOD is the item router. It is easy to use and save server resources. In short, it is cattle.But many people can't understand how to configure it, they choose a simpler but very stalemate flying line.So, in order to understand the public's confusion, I will engage in a small tutorial

Item transmission

So since the item router is called an "item" router, it is the most important function of transmission items.

Here we need to use the drawing module

And send module

These two modules have been upgraded. The extraction module MK2 and sending module MK3 are more powerful. The following uses MK2 and send MK3 to demonstrate

Let's briefly give an example. Enter the item route on the left. It can be a square that needs to be output items such as modular machine output warehouse; the output routing on the right can be any square block for the ME interface, etc.

Shift right -click the two modules, send a binding output box, draw the binding input box

We can also plug some speed upgrades to accelerate the routing of the item to accelerate the packaging

Then you can use it. Please test it yourself for yourself too fast.

Fluid transmission

Since the router can transmit items, it naturally transmits fluids.But unlike other logistics MODs, the item router has a buffer setting.At this time, we have to plug a fluid container in the buffer. It can be used in the tank bucket. This container is not bigger, the better. It is used to undertake the transshipment fluid. We must choose according to the need.

First prepare a fluid module

Press C to configure this fluid module. This configuration mode is to extract the fluid from the front container to the buffer area, which is to install it in the large container you just mentioned

It is best to turn on the single module loop, which helps follow the subsequent automation

I was filled with a storage in advance, so the next step is to transport fluids.

Prepare a send module and bind it to the place where the output of the fluid you want

Configure this

The white list is marked with the storage that has been filled with. At this time, the router will send the full container to the target router and perform the next step

A fluid module should also be prepared in the target router to extract the fluid and send it to the fluid container in front (ME fluid interface, etc.)

Configuration

At this time, this router can output the previously loaded fluid

The last step is to send the storage tank that has been output back to the original router for drawing

Still sending modules+various marks

At this time, the fluid transportation of a complete item router was completed.