[MTR Railway Series #1] Simple Railway System [MTR] My World Railway (MINECRAFT Transit Railway) Minecraft Game

This tutorial is set by the author to use the CC By-NC-SA protocol.

This section teaches you to build a simple railway system.

A railway system requires the following parts: car manufacturers, stations and routes.Among them, car manufacturers, stations and routes are composed of multiple side lines, multiple platforms and multiple stations.

First prepare the following items:

Among them, the railway can be replaced with other types:

The following table lists the speed of the track (note that too fast speed will cause the server to overload):

Type wooden

Stone

Emerald -made iron obsidian -made quartz quartz -made diamond -made speed (KM/H) 20406080120160200300


Now we will officially start construction platforms.

According to the formula

 sideline length = (carriage length+1)*number of compartment+1 

First build a 51 -meter -long platform.The orbital node is placed in the direction of the white line, and the location is the same as the beginning of the platform and block.

Building the same platform not far away from any direction at both ends of the track and connecting it with a railway.

Then build a car factory.The car factory consists of a side line, so the side line is required to use the side -line rail connector to build the side line and connect to the railway with one -way orbit.You also need to use the head -up track connector to avoid the trains from returning to the use of a small turning radius, which leads to molding.

There is a platform block in the station on the right, and the two platforms are separated by 10 squares to make a layout for the addition of multi -platform.

Now the stations and car manufacturers have been built, as long as the last step is completed in the railway dashboard.

Open the railway dashboard and add two stations:

Then add the car factory:

At this time, you can see the default SP1000 train:

The length of other types of trains can be found here.

A new route is added to connect to two stops in AB.

In the last step, add the route to the car factory.As shown in the figure.

After the route creation is successful, the railway system can be improved.