content

This tutorial will be described:

Dragon Research Augmented Device Automation

Mysterious Age Note Magic Altar Automatization Hair

Plant Magic Tyra steel automatic synthesis

Plant magic rune altar automatic synthesis

Original brewing table refining

And what they are in common.

Tutorial cause

There are 5 practical tutorials to Longyan, 1 mysterious magic semi -automated tutorial, 1 original brewing tutorial, 1 Tasla steel automation tutorial, and 2 rune altar automation tutorials.

The goal can be described as similar, but the quality is uneven.Therefore, this tutorial has been produced to perform detailed analysis and establishment guidance.

Thank you list

First of all, thank you in MC Industry 2. During a few years, you have successively explored the mysterious magic betting automation.

Then thank you, the first @Wohaopa post that is known to be automatically aggregated by DE2 is https://www.mcbbs.net/thread-803151-1-1.html, but you need to use MCBBS unlocking card to view

At the same time, thank you for the independent oil pipe MCMOD tutorial producer, The Mindcraft, and the video is at https://www.youtube.com/watch?v=xogev6wnwv0000000000000

Of course, the author of 10 tutorials in the encyclopedia:

Simple automatic rune altar in flowers (multi -picture)

LLMION Simple and Practical Tyra Steel Automatic Synthetic (using AE2) Hengxin uses AE2's rune fully automatic synthesis

Rainless Demon Injecting Demon Semi -automation (MOD: Mysterious Energy, End Shadow Interface, AE)

Don't bother to write AE2 for the original version of the medicine automation

Yeyue Lianhua uses AE2 to realize the research fusion system automation system automation APHEX_SLAYER based on EIO and AE2's dragon research fusion system automation QQ sauce 130947 only performs the core black box automation of Dragon's research aggregation core black box automation through Enerio catheter.Research fusion automation and boring fish 1.12 Dragon Research Pure AE automation injection synthesis

Realist idealist -theoretical analysis

Ideal automation

Imagine the automation you do ...

For the best, add a synthetic table, write the template in the model terminal, and put it enough through the interface terminal. Don't run around again ... You can still accept it.But there are 16 magic runes!Mysterious Note Demon and Longyan Automation are countless.

And, you can't say that you need to synthesize 100 runes, say one at a time, press 100 times.That ... too aggrieved.

Common analysis

You can do some end controls for some automation, such as Tyla Steel and Pharmaceutical Channel.But that's also annoying.Therefore, we try to unify them into a model:

ME network is distributed with some items.

1 There is a group (species, one) items need to be taken out separately, but it may change with the change of the synthetic table.(Tyra steel ignores)

2 In addition, only one material should be sent at a time until the synthetic logistics system should not be distributed before the synthesis is completed.

In short, it is always right to do the standards of Longyan aggregation and mysterious magic injection.

Special item identification

How to identify which items in the synthetic table are special?Nothing is always ... violent enumeration, write a whitelist on the machine?Perhaps it is feasible for the rune altar, but the other automation in our hands is unhappy.A synthetic table needs to be added once.

That's not romantic.We are "realistic ideals" and cannot accept such rough stuff.

Since you can only live at the model terminal, is there any way to reveal to the device that receives raw materials.

Of course, this rename is just a performance effect, you don't need to rename it.

[Processing the model sequentially distributed items in order when writing] So, we can put the inner ghost in the first one in the template, and then when the device is received, we can provide it through high priority!That is, the first -mixed items will enter the center -injecting magic base with high priority, or the core of the aggregation, not the surrounding items.

But don't worry first, there is another problem that has not been solved

Single raw material distribution

First of all, we need to know what a button in a ME interface GUI is doing:

[Do not send the next material when there are items in the target container]

Yes, it is a target container, not the target system.

If we use the box to deposit items, then after the first real material leaves, the second material will be distributed.If we don't want the second material to be sent out, then leave a item!

(Of course, there are more solutions, see the separation of single materials- [AE2] Application Energistics 2 (Applied Energistics 2) -MC Encyclopedia | The largest MineCraft Chinese (mcmod.cn))

Put the interface of the main network, and the interface is adjusted into a blocking mode to open.

Of course you can use normal round stones.

Just take this stuff back after completing the synthesis.

Analog automation

First of all, the raw material is sent, and the "synthetic position" is left in the box that receives the raw materials so that the next item is not sent.

At the same time, other real raw materials are escorted to the correct position:

1. For Tella Gang, all of them are thrown out.

2. For the rune altar, the living stone is cached to one place.However, we will make some changes to simplify automation in the latter construction guidance.

3. For the automation of the brewing table, in addition to the bottle, the raw materials written at the beginning of the template will be transported to the top of the brewing table.

4. For the magic injection and aggregation, it is the first (group) item to be placed in the middle.

Other analysis

The tutorial will use AE2's own logistics system.If you are not familiar with, you can consider this picture:

The box on the left and the items of the ME interface above will go to the right box.This can realize the function of the pipeline.

Of course, if you want to use other pipes, of course, as long as you can achieve priority.

Talk about receiving items with boxes before, but we will not do this next because the box+input bus is better. It is better to directly a ME interface. You can also set up the stones that need to be retained outside.

Detailed construction guidance

Mysterious Demon

Note 1: The source is not within the range of the template.Get ready.It is natural to use mysterious energy, so I do n’t need it here.

Note 2: You may need to start manually.The automatic startup solution is to note the magic claws, or the automatic actuator+the book+knowledge sharing book/cheating book.

Step1: Construction of the altar, please ensure stability during actual construction

Step2:

Step3 (optional): mark the priority to ensure the center of the item center STEP4: finished product recycling device

Step5: Note Magic Base

Step6: Material sending device Step7: Connected!Step8 (if there is heat and mysterious crafts): Please replace the power by yourself

Please bind to a player who can bet on magic.

Run map:

Run analog

First, the items are sent to the square interface, and the stones are stuck inside.The other items are sent to the altar. The first items sent to the center, and other centers are symmetrical/randomly placed.

Note the beginning.

The magic note is completed, there are only one item left in the altar, the middle sender lits, the main network activates the input bus of the central base, and the items are removed.

There are 0 items left in the altar, and the sender on the side is on. The main network activates the input bus of the green network block interface, and removes the occupying round stones.

The next part of the material is distributed.

*You may be puzzled, why do you need to use a relayr+a torch to fill the middle input bus.The answer is that the direct sender is charged because the synthetic is about to end the synthesis without delay.

Longyan aggregation

Interface of the main network:

Let the interface of the main network facing another interface, and mark the stone at the square interface:

Put a input bus to the main network, put it in the red stone card and adjust it to the pulse mode:

Put some cables and bus, as well as the core of the aggregation:

Put the quartz fiber and controller, as well as more cables: as shown in the figure, stick 8 storage bus, the default configuration can be configured: filled the injection device, pay attention to the orientation, the karate Shift right -click all the injection device to adjust to the single item mode: connectRF power supply: Run map:

Process description

The items are distributed to the green network interface, except for round stones, they have entered the green network.The central items are the first in the template and the first one in the green network interface, so they are first inhaled into the green network and transported to the highest polymerization core of the priority.Other items are scattered to each injector.

The core of the items entering the injection and the polymerization occur within 1Tick.At this time, the sender below the polymer lights up because there are items in the network.The core of the aggregation receives the signal to initiate synthesis.

The synthesis is completed. The main network is pumped away from the eccentric network of the aggregate core, and the sender of the green network lits to activate the input bus of the main network to the interface below.You can match.Tyra steel

Create a good altar next to the main network cable:

The interface with arrows is the main network, and the other is the green network:

Make up the funnel

Put it into a panel

Run map:

Rune altar

Magic hourglass: 1 sand

Put the rune altar and put the forest staff on the launcher

Production can complete the detection circuit, put it in a checkered box: make items/livestone separation system:

Put on the interface, it will be the main network.Connecting the sediment fiber and the green network makes the green network and the yellow network have electricity:

Right -click the tail of the handwitch to make the arrow point to the first interface.In this way, the interface with an arrow is not a green network. After that, we connected to the main network and placed a funnel flower next to it.

Don't forget the blocking mode, but there is no need for a stone in the template, please see the follow -up analysis:

Finally, we need to give the Box Box a redstone energy:

Device final diagram: prefix characteristics

1. About the interface.You may not have been exposed to interfaces with direction.It is roughly equivalent to a panel interface+a cable. The difference is that it can receive the operation of the pipeline (funnel, funnel flower).

2. Flower box.The items are input into the lattice box into a drop.If the lattice box is filled, the drop -off 10S cannot be picked up by the funnel flower.

3. Fully flower and rune altar.The funnel flower is slightly faster than picking items, so the finished product will be returned directly to the main network interface by the funnel.However, the materials are cast by the charging checkered box. The leakage flowers cannot be collected in a short time, so it will be given to the rune altar.

4, comparative device detection rune altar.When the formula is correct, a signal with a strength of 1 is issued, and a signal with a strength of 2 is issued when the charging is completed.

5. The launcher+forest staff can activate the altar.

Process analysis

Item sending.Livestone was not lost because of the blacklist.

The formula is correct and starts to fill the energy.

After the filling is complete, the relay activation is activated, and the livestone is extracted.At the same time, the new round of materials were sent, and items except living stones fell.

The transmitter is activated regularly to make runes.

The rune was picked up by the funnel flower, and the new round of materials entered the rune altar.

Brewing table

*1 For simplicity, use here: Single raw material separation-disconnect interface scheme, see the separation of single materials

*2 Do not write the flame powder into the template, otherwise a template must write 20 synthesis, 60 grids ... need complicated pseudo -coordination, and the practicality is not strong.

Optional blue cables add output bus flame powder to the brewing table.

Process analysis

1. The items are sent to the square interface, and then enter the brewing table.At the same time, the next item is sent.

2. The "material" above the brewing table is detected, because the other is only the storage bus.So the sender was dark and the square interface was disconnected.

3. After the synthesis is complete, the sender is on, the input bus activates all the water bottles once, and the bus connection is triggered.

4. The next material enters the brewing table